All Categories

History

High-power stroboscope 2-lamp SS series ideal for steel scratch inspection, gravure printing, etc.-SS-1000W
High-power stroboscope 2-lamp SS series ideal for steel scratch inspection, gravure printing, etc.-SS-215W
High-power stroboscope 2-lamp SS series ideal for steel scratch inspection, gravure printing, etc.-Nissin Electronics Industry Co., Ltd.

High-power stroboscope 2-lamp SS series ideal for steel scratch inspection, gravure printing, etc.
Nissin Electronics Industry Co., Ltd.

Nissin Electronics Industry Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

19.0hours

Relatively Fast Response


About This Product

This is a strobe rotation meter/stroboscope for visual inspection. In order to support the measurement and analysis of various high-speed moving objects and high-speed rotating objects, we have a rich lineup ranging from small and lightweight handheld types to stationary types that illuminate a wide range of areas.

■High power stroboscope 100W/200W 2-lamp type SS SERIES Xe xenon

・100W/200W 2-lamp stroboscope -Can brightly illuminate a wide area ・High brightness/high stability ・Measurement accuracy ±0.01%+ (0 or 1) rpm

■Features

・This is a 100 watt/200 watt 2-lamp stroboscope. ・Two lights emit simultaneously to brightly illuminate a wide area. It allows for deep, three-dimensional observation. -Models that can measure up to 30,000 rpm are also available. ・Emits light with high precision and high brightness over the entire rotation range. ・Light intensity is automatically switched in 3 or 4 stages depending on the light emission cycle. It is bright and easy to observe even at low speeds and high speeds. - The rotation speed can be largely varied with the coarse adjustment volume, and detailed settings can be made in 1 rpm increments with the fine adjustment volume. The display is a bright and easy-to-read digital LED display. - Can also support light emission using external synchronization signals. ・A variety of combination lamp houses are available. ・Please contact us for AC110V, 120V, 220V, 240V specifications. -Please consider the SCD series for wider irradiation. A compact size SS series single light type is also available.

  • Product

    High-power stroboscope 2-lamp SS series ideal for steel scratch inspection, gravure printing, etc.

Share this product


320+ people viewing

Last viewed: 19 minutes ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

4 Models of High-power stroboscope 2-lamp SS series ideal for steel scratch inspection, gravure printing, etc.

Click on the part number for more information about each product

Image Part Number Price (excluding tax) High voltage power supply system High voltage charging method Power supply Weight Display Number of light emitting lights Measurement accuracy Measuring rotation speed range (rpm) Power consumption Maximum lamp input power External light synchronization External input synchronized light emission (Hz) External dimensions Rotation speed adjustment Output voltage Lamp input power (J/F) Lamp input power Gate time
High-power stroboscope 2-lamp SS series ideal for steel scratch inspection, gravure printing, etc.-Part Number-SS-1000W

SS-1000W

Available upon quote

Switching type output constant voltage

Rapid charging method using semiconductors

AC100V±10% 50/60Hz

15kg

7 segment LED number 5 digits Minimum unit 1 rpm

2 lights simultaneous lighting type

±0.01%+ (0 or 1) rpm

100~approx. 12,000

Maximum 500VA (50VA during standby)

100 watts continuous each light

A.TTL level+or-edge
b.Contact MAKE or BREAK

0~200

W430×H150×D400mm

10-turn coarse adjustment volume + 10-turn fine adjustment volume

3V negative pulse wave

0.5~4.0

Up to 100 watts continuous per light (200 watts total)

Repeat for 1 second

High-power stroboscope 2-lamp SS series ideal for steel scratch inspection, gravure printing, etc.-Part Number-SS-1500W

SS-1500W

Available upon quote

Switching type output constant voltage

Rapid charging method using semiconductors

AC100V±10% 50/60Hz

15kg

7 segment LED number 5 digits Minimum unit 1 rpm

2 lights simultaneous lighting type

±0.01%+ (0 or 1) rpm

100~approx. 30,000

Maximum 500VA (50VA during standby)

100 watts continuous each light

A.TTL level+or-edge
b.Contact MAKE or BREAK

0~500

W430×H150×D400mm

10-turn coarse adjustment volume + 10-turn fine adjustment volume

3V negative pulse wave

0.2~1.0

Up to 100 watts continuous per light (200 watts total)

Repeat for 1 second

High-power stroboscope 2-lamp SS series ideal for steel scratch inspection, gravure printing, etc.-Part Number-SS-215W

SS-215W

Available upon quote

Switching type output constant voltage

Rapid charging method using semiconductors

AC100V±10% 50/60Hz

16kg

7 segment LED number 5 digits Minimum unit 1 rpm

2 lights simultaneous lighting type

±0.01%+ (0 or 1) rpm

100~approx. 15,000

Maximum 800VA (80VA during standby)

200 watts continuous each light

A.TTL level+or-edge
b.Contact MAKE or BREAK

0~250

W430×H150×D400mm

10-turn coarse adjustment volume + 10-turn fine adjustment volume

3V negative pulse wave

0.8~2.3

Up to 200 watts continuous per light (400 watts total)

Repeat for 1 second

High-power stroboscope 2-lamp SS series ideal for steel scratch inspection, gravure printing, etc.-Part Number-SS-230W

SS-230W

Available upon quote

Switching type output constant voltage

Rapid charging method using semiconductors

AC100V±10% 50/60Hz

16kg

7 segment LED number 5 digits Minimum unit 1 rpm

2 lights simultaneous lighting type

±0.01%+ (0 or 1) rpm

100~approx. 30,000

Maximum 800VA (80VA during standby)

200 watts continuous each light

A.TTL level+or-edge
b.Contact MAKE or BREAK

0~500

W430×H150×D400mm

10-turn coarse adjustment volume + 10-turn fine adjustment volume

3V negative pulse wave

0.4~1.15

Up to 200 watts continuous per light (400 watts total)

Repeat for 1 second

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Tachometers Products

Other products of Nissin Electronics Industry Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Nissin Electronics Industry Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

19.0hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree