All Categories

History

  1. Metoree
  2. Quick change tool holder for automatic lathe PZ turn square shank (Yamada Machine Tool Co., Ltd.)

Quick change tool holder for automatic lathe PZ turn square shank
Yamada Machine Tool Co., Ltd.

About This Product

■Square shank / Features

・Steel shank -Shank length can be changed as a special product. - Hex socket screw included. - If you wish to use a Torx wrench, you can replace it with a Torx screw (sold separately). *One hex socket screw is included for each shank.

■5 effects of PZ turn

・Significantly reduces equipment downtime due to tool replacement ・Since no correction or trial cutting is required after tip replacement, it is possible to eliminate the cause of defective products and achieve a "good product the first time". ・Easy to change setups, improving ability to respond to variable-variety, high-mix production - Eliminate the troublesome work of attaching and removing hoses during setup

■Realization of “off-machine setup”

- Measure the correction value in advance by attaching the chip to the head outside the processing machine and measuring the chip error. ・Restart the equipment immediately after replacing the head

■Nine features of PZ Turn

・Separate head and shank structure -Easy head replacement with just one bolt ・Individual differences in work are less likely to occur due to attachment and detachment using a torque screwdriver. ・Repeatability of head seating position of 10μ or less is achieved with tapered polygon coupling. ・Despite the separate structure, high rigidity with 97% of the back force resistance of an integrated holder ・All PZ turns support coolant through. - Coolant connections on the shank are compatible with 3 locations, allowing for various installations. ・Since the shank is not removed from the equipment, there is no need to attach or detach the hose. ・Compatible with ISO chips, inserts from various manufacturers can be used

■Structure of PZ turn

・Separable head and shank that can be attached and detached with one bolt ・Tapered polygon coupling that guarantees repeatability of cutting edge position in all X/Y/Z directions to less than 10μ ・Lineup of over 100 types of heads compatible with various ISO chips - All heads support coolant through, just connect the hose to the shank only

  • Product

    Quick change tool holder for automatic lathe PZ turn square shank

Share this product


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Quick change tool holder for automatic lathe PZ turn square shank

Image Part Number Price (excluding tax)

PZ1010R-84

Available upon quote

Other products of Yamada Machine Tool Co., Ltd.

Reviews shown here are reviews of companies.

Low load, high quality knurling QUICK Cutting knurling tool Flat knurling for small diameter machining C601-08,10,12,16-N-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK Cutting knurling tool Flat knurling for small diameter machining C601-08,10,12,16-N

Yamada Machine Tool Co., Ltd.

380+ people viewing

Last viewed: 15 hours ago

Response time: 14.19 hours

Toolholders

8 models listed

Low load, high quality knurling QUICK Cutting knurling tool Flat knurling for small diameter machining C601-08,10,12,16-NB-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK Cutting knurling tool Flat knurling for small diameter machining C601-08,10,12,16-NB

Yamada Machine Tool Co., Ltd.

510+ people viewing

Last viewed: 20 hours ago

Response time: 14.19 hours

Cutting Tools

4 models listed

Low load, high quality knurling QUICK Cutting knurling tool Cutting knurling for flat grain C601-16,20,25-N-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK Cutting knurling tool Cutting knurling for flat grain C601-16,20,25-N

Yamada Machine Tool Co., Ltd.

550+ people viewing

Response time: 14.19 hours

Cutting Tools

3 models listed

Low load, high quality knurling QUICK cutting knurling tool Flat knurling for machining large diameter workpieces C621-27-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK cutting knurling tool Flat knurling for machining large diameter workpieces C621-27

Yamada Machine Tool Co., Ltd.

220+ people viewing

Response time: 14.19 hours

Cutting Tools
Low load, high quality knurling QUICK Cutting knurling tool Knurling for cutting cross stitch C602-10,12,16-N-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK Cutting knurling tool Knurling for cutting cross stitch C602-10,12,16-N

Yamada Machine Tool Co., Ltd.

350+ people viewing

Response time: 14.19 hours

Cutting Tools

3 models listed

Low load, high quality knurling QUICK cutting knurling tool Cross-grain knurling C602-10,12,16-NB-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK cutting knurling tool Cross-grain knurling C602-10,12,16-NB

Yamada Machine Tool Co., Ltd.

380+ people viewing

Response time: 14.19 hours

Cutting Tools

3 models listed

Low load, high quality knurling QUICK Cutting knurling tool Lathe cross-grain knurling C602-16,20,25-N-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK Cutting knurling tool Lathe cross-grain knurling C602-16,20,25-N

Yamada Machine Tool Co., Ltd.

400+ people viewing

Last viewed: 22 hours ago

Response time: 14.19 hours

Cutting Tools

3 models listed

Low load, high quality knurling QUICK cutting knurling tool Cross-grain knurling for large workpieces C622-40R,57R-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK cutting knurling tool Cross-grain knurling for large workpieces C622-40R,57R

Yamada Machine Tool Co., Ltd.

260+ people viewing

Last viewed: 7 hours ago

Response time: 14.19 hours

Rotary Tools

4 models listed

High Tensile Aluminum Coolant & Air Hose Piranha Clamp Piranha Cooling Line-Yamada Machine Tool Co., Ltd.

High Tensile Aluminum Coolant & Air Hose Piranha Clamp Piranha Cooling Line

Yamada Machine Tool Co., Ltd.

2320+ people viewing

Last viewed: 17 hours ago

Response time: 14.19 hours

Air Blow Nozzles

636 models listed

Low load, high quality knurling QUICK cutting knurling tool 3-piece cutting knurling C693-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK cutting knurling tool 3-piece cutting knurling C693

Yamada Machine Tool Co., Ltd.

270+ people viewing

Response time: 14.19 hours

Cutting Tools

2 models listed

Knurling with less interference QUICK Rolling knurling tool Small rolling knurling for flat grain F701-10,12,16-Yamada Machine Tool Co., Ltd.

Knurling with less interference QUICK Rolling knurling tool Small rolling knurling for flat grain F701-10,12,16

Yamada Machine Tool Co., Ltd.

470+ people viewing

Response time: 14.19 hours

6 models listed

Knurling with less interference QUICK Rolling knurling tool Rolling knurling compatible with all patterns F712-10,12,16-Yamada Machine Tool Co., Ltd.

Knurling with less interference QUICK Rolling knurling tool Rolling knurling compatible with all patterns F712-10,12,16

Yamada Machine Tool Co., Ltd.

290+ people viewing

Response time: 14.19 hours

Rolling Machines

3 models listed


View more products of Yamada Machine Tool Co., Ltd.

About Company Handling This Product

Yamada Machine Tool Co., Ltd.

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree