All Categories
History
Response Rate
100.0%
Response Time
95.7hours
Product
Total counter digital counter DE seriesHandling Company
Daiichi Electronics Co., Ltd.Categories
| Image | Part Number | Price (excluding tax) | Mass | Count input and reset | Effect of auxiliary power supply | Display red | Display green | Display orange | Display Maximum display digit | Display name engraving | Display unit engraving | Display RESET engraving | Effect of temperature | Maximum counting speed | Capture power source | Strength overload | Strength impact | Strength Withstand voltage | Strength Insulation resistance | Strength vibration | Exterior color | Input drive voltage/current | Input Maximum counting speed | Input minimum pulse width | Input Input signal | Input count method | Power outage memory method | Storage temperature range | Operating temperature and humidity range | Reset Drive voltage/current | Reset minimum pulse width | Reset input signal |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
DE2600 |
Available upon quote |
-20~+70℃ |
Approximately 200g |
No false counts at maximum counting speed of 100cps |
ON time: 50ms |
DC24V±10% 2.0W or less |
Red 7 segment LED character height 10.16mm |
Green 7 segment LED Character height 10.16mm |
Maximum 6 digit display |
Letter height 3mm carved on top right of filter (standard) |
Orange 7 segment LED Character height 10.16mm |
No-voltage 1a contact or open connector input ON detection: 0~3V |
BOX Munsell N1.5 (black) |
DC24V 10mA |
No false counts at 24V DC ±10% |
Counting input and reset 1.5 times DC24V for 10 seconds |
Impact of 294m/S^2 in X, Y, and Z directions 3 times in forward and reverse directions |
Vibration frequency 16.7Hz, double amplitude 1mm (5.88m/S^2) in X, Y, and Z directions for 2 hours each |
No erroneous counts when changing from 0 to 55℃ |
0~55℃, 20~90%RH |
Voltage input (1 count when voltage is applied) |
DC24V 10mA |
10cps |
No-voltage 1a contact or open connector |
ON time: 50ms, OFF time: 50ms |
Character height 4mm Engraved at the top center of the filter (optional) |
Backup using non-volatile memory (more than 100,000 replacements) |
Letter height 5mm engraving on the bottom right of the filter (optional) |
No-voltage 1a contact or open collector |
Voltage input (1 reset when voltage is applied) |
1 pulse 1 count |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
Response Rate
100.0%
Response Time
95.7hrs
