All Categories
History
Response Rate
100.0%
Response Time
47.6hours
Product
BS servo amplifier X seriesHandling Company
Shibaura MachineCategories
| Image | Part Number | Price (excluding tax) | Speed current control Current limit | Speed current control Speed command | Speed fluctuation rate | Speed control range | Speed position detector | Mass | Vibration resistance | General purpose output | General purpose input | Maximum applicable motor | External dimensions (W×H×D) | Acceleration/deceleration Soft start | Acceleration/deceleration S-curve acceleration/deceleration | Control method | Control circuit power supply voltage | Control circuit power supply capacity | Protection function | Protective structure | Storage ambient conditions | Ambient conditions of use | Position control command form | Position control number of divisions | Main circuit power supply voltage | Main circuit power supply capacity | Monitor function display | Monitor function External display | Monitor function output | Pulse output division number | Pulse output Output form | Auto tuning function |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
008P2 |
Available upon quote |
DC 0~±10V, motor maximum torque at ±10V (ratio setting possible), input resistance 49kΩ, AD resolution 12bit (current command for current control) |
DC 0~±10V, maximum motor rotation speed at ±10V (ratio setting possible), input resistance 49kΩ, AD resolution 12bit (speed limit in current control) |
±0.02% or less at load 0~100% or power supply -15~10%, ±0.2% or less at temperature 0~55℃ (Specification values are at rated rotation) |
1:5,000 (ratio of lower limit rotation speed that can output motor rated current and rated rotation speed) |
Resolver or 17bit serial encoder (both resolver and encoder can be converted to absolute) |
1.3kg |
Compliant with IEC60068-2-6, frequency 10~57Hz, single amplitude 0.075mm, frequency 57~150Hz, acceleration 9.8m/s2 |
DC24V 50mA 5 points (For speed control: servo normal, servo ready, stop detection, warning, MB output) |
DC24V 6mA 8 points (For speed control: Run, reset, MB check, forward rotation permission, reverse rotation permission, current value clear, origin stop, PON input) |
200W |
65×170×150mm |
Acceleration/deceleration time can be set independently for speed command, linear acceleration/deceleration from 0.000 to 65.535s in 0.001s steps |
Acceleration/deceleration time can be set for speed command or pulse command, S-curve acceleration/deceleration from 0.000 to 65.535s in 0.001s steps |
PWM 3-phase sine wave |
1 phase AC200~230V |
50VA |
Overcurrent, overvoltage, voltage drop, motor overload (electronic thermal, instant thermal), fin overheating, countercurrent resistance overload, resolver disconnection, encoder disconnection, etc. |
IP10 |
Temperature: -10~70℃ (No freezing), Humidity: 10~90%RH (No condensation) Atmosphere: No dust, metal powder, or corrosive gas. |
Temperature: 0~55℃ (No freezing), Humidity: 10~90%RH (No condensation) Atmosphere: No dust, metal powder, or corrosive gas. Installation altitude: 1,000m or less |
Forward rotation/reverse rotation pulse (A phase/B phase pulse, forward/reverse signal/feeding pulse is also possible) |
Resolver: 24,000 P/rev |
1 phase AC200~230V |
500VA |
5-digit LED (various monitors, checks, adjustments, and parameter settings possible) |
DPA-80 (sold separately) can be connected (speed, current, current value, electronic thermal, etc. can be monitored) |
Speed or current monitor, 0~±10V, output resistance 330Ω (short circuit protection), DA resolution 12bit (special support) |
Resolver: 24,000 P/rev |
A phase/B phase pulse (forward rotation/reverse rotation pulse), Vout: 3V (typ) 20mA (max) |
Automatic gain setting through repeated tuning operations |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
