Series with 1,500℃ temperature chamber Iprexor HT 25N-25N

Series with 1,500℃ temperature chamber Iprexor HT 25N
ITS Japan Co., Ltd.

About This Product

■Product overview"CMC (ceramic matrix composite)", which has been attracting attention in the aircraft industry recently, has superior "higher temperature resistance" and "lighter weight" than conventional metals, and is highly effective in improving fuel efficiency, and is being used in aircraft engine components and power generation equipment. is expected to progress further. However, until now there has been no dynamic rheological apparatus (DMA) that can evaluate mechanical properties in the operating temperature range.

The latest addition to the lineup, the EPLEXOR®HT series, has been newly developed as a device capable of high-temperature measurements up to 1500℃, with an updated high-temperature chamber that was previously considered an option. Equipped with the same double drive as the standard EPLEXOR series, the new digital force/displacement sensor enables a wide range of measurements from minute deformation/load to large deformation, and high temperature measurement up to 1500℃.

Equipped with the same double drive system as the Eplexor series. One device can be equipped with a standard temperature chamber (-150°C to 500°C) and a high-temperature chamber (room temperature to 1,500°C), and by switching the temperature chamber, it can handle a wide temperature range from -150°C to 1,500°C. Physical properties can be obtained.

■Main features・Newly developed 1500℃ temperature chamber (maximum 1,000℃ specification also available)
・Gas purge system to prevent thermal oxidative deterioration
・Supports a wide range of measurements by replacing load sensors
・High load measurement of ±500N with double drive system
・Highly accurate detection of minute loads using digital load sensors
・Highly accurate detection of minute displacements using digital displacement sensors
・Supports tension, compression, and 3-point bending measurement modes

■Specials when using standard temperature chamber・Evaluation of nonlinear viscoelasticity under high strain
・Analysis of audible frequency range using master curve
・Tensile test (optional)
・Program to generate arbitrary waveforms and hysteresis analysis software

Model
There is 1 model available for this product.

Product
Series with 1,500℃ temperature chamber Iprexor HT 25N

Handling Company
ITS Japan Co., Ltd.

60+ people viewing

Last viewed: 3 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Series with 1,500℃ temperature chamber Iprexor HT 25N

Image	Part Number	Price (excluding tax)	High temperature chamber 1,000℃ specification or 1,500℃ specification	Static strain control range	Weight	Test mode analysis	Test mode compatible test	Exam mode options	Device dimensions (width x depth x height)	Standard chamber	Maximum static load	Maximum dynamic load	Maximum dynamic strain	Required power supply (capacity)	Frequency
	25N	Available upon quote	Room temperature: ~1,000℃ or ~1,500℃ Heating rate: max. 50K/min Time to reach 1500℃: 30 minutes (ballistic heating)	~60mm	350kg	Master curve analysis (optional) Hysteresis analysis (optional)	Temperature dispersion, frequency dispersion, strain dispersion load distribution Temperature/frequency dispersion (master curve) Time dispersion, fatigue test	Creep/stress relaxation Arbitrary waveform creation option (rolling resistance prediction using pulse waves) liquid immersion test	1,470mmx750mmx2,200mm	-160℃~500℃ Heating rate: max. 25℃/min Cooling rate: max. 15℃/min (using liquid nitrogen)	~25N	±25N (50N)	±1.5mm (±3.0mm)	220V/single phase 50A	0.001~100Hz (Optional specifications: 0.0001~200Hz)

Other products of ITS Japan Co., Ltd.

Reviews shown here are reviews of companies.

Series with 1,500℃ temperature chamber Iprexor HT 100N

ITS Japan Co., Ltd.

50+ people viewing

Last viewed: 33 minutes ago

Series with 1,500℃ temperature chamber Iprexor HT 150N

ITS Japan Co., Ltd.

50+ people viewing

Series with 1,500℃ temperature chamber Iprexor HT 500N

ITS Japan Co., Ltd.

60+ people viewing

Last viewed: 13 seconds ago

Standard type Iplexer series 25N

ITS Japan Co., Ltd.

50+ people viewing

Standard type Iprexor series 100N

ITS Japan Co., Ltd.

40+ people viewing

Last viewed: 14 hours ago

Standard type Iprexor series 150N

ITS Japan Co., Ltd.

60+ people viewing

Last viewed: 2 minutes ago

Standard type Iprexor series 500N

ITS Japan Co., Ltd.

40+ people viewing

High load type Iprexor series 2000N

ITS Japan Co., Ltd.

50+ people viewing

High load type Iprexor series 4000N

ITS Japan Co., Ltd.

50+ people viewing

Last viewed: 23 minutes ago

Computer-controlled twin capillary rheometer R6000

ITS Japan Co., Ltd.

80+ people viewing

Last viewed: 4 hours ago

Capillary Rheometers

2 models listed

High load type Iprexor series 6000N

ITS Japan Co., Ltd.

50+ people viewing

Last viewed: 15 minutes ago

Gabometer 2000N

ITS Japan Co., Ltd.

50+ people viewing

Last viewed: 13 minutes ago

View more products of ITS Japan Co., Ltd.

About Company Handling This Product

ITS Japan Co., Ltd.

Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Series with 1,500℃ temperature chamber Iprexor HT 25N ITS Japan Co., Ltd.

About This Product

■Product overview

■Main features

■Specials when using standard temperature chamber

1 Models of Series with 1,500℃ temperature chamber Iprexor HT 25N

25N

Other products of ITS Japan Co., Ltd.

About Company Handling This Product

Series with 1,500℃ temperature chamber Iprexor HT 25N
ITS Japan Co., Ltd.