All Categories

History

Portable Vibration Meter Portable Vibration Meter Charge Vibration Meter Model-1607-Model-1607
Portable Vibration Meter Portable Vibration Meter Charge Vibration Meter Model-1607-Showa Sokki Co., Ltd.

Portable Vibration Meter Portable Vibration Meter Charge Vibration Meter Model-1607
Showa Sokki Co., Ltd.


About This Product

■Features

・An easy-to-use wideband vibration meter that can also be used with sensors with a built-in amplifier and can perform a variety of measurements. ・A general-purpose compact vibration meter that can measure three modes: acceleration, velocity, and displacement. ・It has a wide band and can measure from minute levels to large levels. ・Since it is small and can use dry batteries, it is highly mobile for on-site measurements. - Built-in high-pass and low-pass filters allow you to select the band that suits your measurement purpose. - Equipped with AC and DC output terminals, allowing waveform analysis and level recording. - Sensor sensitivity can be easily set, making it easy to use various sensors. ・In addition to normal charge output type detectors, remote charge converters and preamplifier built-in detectors can also be used.

■Configuration

・Main unit: Model-1607 1 unit ・4 AA alkaline batteries ・Instruction manual 1 copy

■Charge signal input (front BNC connector) Input terminal to which a charge output type detector can be directly connected

・Adaptive detector sensitivity When PU SENS×1: 1.00 to 9.99pC/G, When PU SENS×10: 10.0 to 99.9pC/G Detectors outside the range can be used by changing the range. ・Maximum input charge 10,000pC

■Constant current drive voltage input (rear BNC connector) Built-in constant current power supply allows use of detector with built-in preamplifier

・Adaptive detector sensitivity When PU SENS×1: 1.00 to 9.99mV/G, When PU SENS×10: 10.0 to 99.9mV/G ・Maximum input voltage ±10V (actually limited by the measurement range of the detector) ・Constant current setting range 0.4 to 4mA (depending on internal potentiometer. Voltage is 15VDC) ・Adaptive input sensitivity When PU SENS×1: 1.00 to 9.99mV/G, When PU SENS×10: 10.0 to 99.9mV/G ・Maximum input voltage ±10V (drive power supply ±15VDC)

  • Product

    Portable Vibration Meter Portable Vibration Meter Charge Vibration Meter Model-1607

Share this product


20+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Portable Vibration Meter Portable Vibration Meter Charge Vibration Meter Model-1607

Image Part Number Price (excluding tax) Power supply Accuracy Measuring range Speed ​​(cm/s) Measurement range Displacement 2 (mm) Measurement range Displacement 1 (mm) Measurement range Acceleration 2 (m/s^2) Measurement range Acceleration 1 (G) Calibration signal Dimensions/mass Output indicator Terms of use Low pass filter (Hz) High pass filter (Hz) Overload lamp DC OUT (BNC) AC OUT (BNC)
Portable Vibration Meter Portable Vibration Meter Charge Vibration Meter Model-1607-Part Number-Model-1607

Model-1607

Available upon quote

Batteries: 4 AA batteries (DC6V)
More than 5 hours continuous use with alkaline type (2.5 hours with manganese type)
AC100V: Depends on AC adapter sold separately

Within 3% for 80Hz, 100pC input

3Hz~ (0.5dB)
0.316/1~10,000/31,600 full scale

10Hz~ (0.5dB)
0.01/0.0316~316/1,000 full scale

3Hz~ (0.5dB)
0.1/0.0316~316/10,000 full scale

1Hz~50KHz (1dB), 2Hz~20kHz (0.5dB)
0.316/1~10,000/31,600 full scale

1Hz~50KHz (1dB), 2Hz~20kHz (0.5dB)
0.0316/0.1~1,000/3,160 full scale

Variable level 80Hz sine wave (±2%) for output calibration

90 (W) ×177 (H) ×230 (D) mm Approx. 2kg

Double scale of 0~1,0~3, minimum scale is 1/50 and BATT mark
Class 1.5 (average detection equivalent peak display)
Display selection of “PEAK”, “P-P”, “BATT” by switch

Temperature: 0~50℃ Humidity: 90%RH or less

300/1k/3k/10k/OUT (50KHz)

OUT (1Hz) /3/10/30/100

When the internal circuit exceeds the linear range, the LED lights up and automatically returns.

Level output (average detection equivalent peak output) 0~1VDC Output resistance 100Ω Maximum current 5mA

Waveform output ±1V/full scale Output resistance 100Ω Maximum current 5mA

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Vibrometers Products

Other products of Showa Sokki Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Showa Sokki Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree