Environmental test equipment (Cosmopia C) Constant temperature and humidity chamber Excellent series EXH/EXT type
Kyushu Kiden Co., Ltd.
About This Product
■Summary
Hitachi's environmental testing equipment "Cosmopia" meets the demands of the times with functionality and reliability.
Environmental test equipment is used in many fields such as semiconductors, electronic components, and biotechnology, and is required to be highly functional for more advanced development and research. At the heart of Hitachi's system is a scroll compressor that provides efficient and stable performance in the low frequency range. We create a testing environment that is essential for improving the reliability of various products and for experiments and research in the food, chemical, and pharmaceutical fields.
■Features
Achieves a temperature change rate of 10℃/min and 5℃/min by gradient control at -40℃↔85℃.
■Short evaluation test
Because the temperature rises and falls quickly, the time required to reach the set temperature is significantly shortened.
■Front operation
The earth leakage breaker for turning on the power is placed on the right side of the front of the device, allowing operation from the front.
■Water tank
The water supply tank for the humidifier and humidity measuring wick is located at the bottom of the front of the device and can be taken out from the front. Additionally, the water tank is equipped with a one-touch coupler, allowing you to take out the water tank and refill with pure water even during operation.
■Observation window
The glass window for observing the condition of the sample inside the test chamber was 270 mm long x 190 mm wide. The glass windows are equipped with anti-fog heaters. The light inside the tank for internal observation can be operated on the LCD screen.
■Service space/installation space
The water supply tank is also designed to be taken out from the front, reducing the service space for the equipment.
■Using HFC refrigerant
The refrigerant for the refrigeration cycle is HFC refrigerant (R404A), which has zero ozone depletion potential, in compliance with HCFC regulations (CFC regulations).
■Consideration for recycling
The resin parts used in the device are labeled with their material names to ensure that they can be collected separately at the time of disposal. (Example: >ABS-A<,>PE<)
■ Equipped with a color LCD touch panel that is easy to see and operate.
Equipped with a touch panel, you can set and operate the device just by touching the screen. Equipped with a color LCD for easy viewing and a wide variety of functions.
-
Product
Environmental test equipment (Cosmopia C) Constant temperature and humidity chamber Excellent series EXH/EXT type
-
Handling Company
Kyushu Kiden Co., Ltd.
-
Categories
4 Models of Environmental test equipment (Cosmopia C) Constant temperature and humidity chamber Excellent series EXH/EXT type
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Accessories | Classification | Controller | Cooling device Cooling method | Cooling device Refrigerant | Cooling water | Electrical characteristics Maximum load current (A) | Electrical characteristics Power supply | Equipment | Exterior | Humidity range (%RH) | Product dimensions (mm) | Product mass (kg) | Protection device | Space temperature and humidity deviation (℃/%RH) | Temperature and humidity fluctuation (℃/%RH) | Temperature change rate | Temperature range (℃) | Temperature/humidity gradient (℃/%RH) | Test chamber internal volume (L) (mm) | Time to reach extreme temperature |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
EC-35EXH |
Available upon quote | Shelf support, shelf board, fuse, Y strainer, wick, rubber plug, instruction manual | Constant temperature and humidity chamber | Operation mode: Fixed value or program operation (Number of steps: 20 steps/1 pattern, number of repetitions: max. 98 times and infinite) | Water-cooled type, single stage compression refrigeration method + dual refrigeration method | Single stage side: R404A, dual side: (high temperature side) R404A, (low temperature side) R23 | Water amount: 5,000L/h (when cooling water inlet temperature is 32℃) ・Water pressure: 0.1~0.5MPa ・Pipe diameter (equipment side): Rc1 1/4 | 100 | Three phase 200V 50/60Hz | Observation window, tank light, cable hole (Φ50), casters, level adjuster | Dark gray finish | 20~98 | Width 1,100 x Depth 1,960 x Height 1,900 | 925 | Earth leakage circuit breaker, control circuit fuse, motor overload protection device, high voltage cutoff device, overtemperature rise prevention device, dry firing prevention device (constant temperature and humidity chamber only), heater overcurrent protection device, etc. |
2.0/8.0 100.1℃ or higher: 3.0 |
±0.3/±3.0 100.1℃ or higher: 0.5 |
Descending: 10.0℃/min (128~-48℃) Rise: 10.0℃/min (-48~128℃) |
-70~150 |
3.0/10.0 100.1℃ or higher: 5.0 |
306 (width 630 x depth 540 x height 900) |
Descending: within 20 minutes (20~-70℃) Rising: within 20 minutes (20~150℃) |
|
|
EC-85EXH |
Available upon quote | Shelf support, shelf board, fuse, Y strainer, wick, rubber plug, instruction manual | Constant temperature and humidity chamber | Operation mode: Fixed value or program operation (Number of steps: 20 steps/1 pattern, number of repetitions: max. 98 times and infinite) | Water-cooled type, single stage compression refrigeration method + dual refrigeration method | Single stage side: R404A, dual side: (high temperature side) R404A, (low temperature side) R23 | Water amount: 5,000L/h (when cooling water inlet temperature is 32℃) ・Water pressure: 0.1~0.5MPa ・Pipe diameter (equipment side): Rc1 1/4 | 105 | Three phase 200V 50/60Hz | Observation window, tank light, cable hole (Φ50), casters, level adjuster | Dark gray finish | 20~98 | Width 1,470 x Depth 2,240 x Height 2,000 | 1,130 | Earth leakage circuit breaker, control circuit fuse, motor overload protection device, high voltage cutoff device, overtemperature rise prevention device, dry firing prevention device (constant temperature and humidity chamber only), heater overcurrent protection device, etc. |
2.0/8.0 100.1℃ or higher: 3.0 |
±0.3/±3.0 100.1℃ or higher: 0.5 |
Descending: 5.0℃/min (128~-48℃) Rise: 5.0℃/min (-48~128℃) |
-70~150 |
3.0/10.0 100.1℃ or higher: 5.0 |
800 (width 1,000 x depth 800 x height 1,000) |
Descending: within 30 minutes (20~-70℃) Rise: within 30 minutes (20~150℃) |
|
|
EC-35EXT |
Available upon quote | Shelf support, shelf board, fuse, Y strainer, rubber plug, instruction manual | Constant temperature bath | Operation mode: Fixed value or program operation (Number of steps: 20 steps/1 pattern, number of repetitions: max. 98 times and infinite) | Water-cooled type, single stage compression refrigeration method + dual refrigeration method | Single stage side: R404A, dual side: (high temperature side) R404A, (low temperature side) R23 | Water amount: 5,000L/h (when cooling water inlet temperature is 32℃) ・Water pressure: 0.1~0.5MPa ・Pipe diameter (equipment side): Rc1 1/4 | 91 | Three phase 200V 50/60Hz | Observation window, tank light, cable hole (Φ50), casters, level adjuster | Dark gray finish | - | Width 1,100 x Depth 1,960 x Height 1,900 | 920 | Earth leakage circuit breaker, control circuit fuse, motor overload protection device, high voltage cutoff device, overtemperature rise prevention device, dry firing prevention device (constant temperature and humidity chamber only), heater overcurrent protection device, etc. |
2.0 100.1℃ or higher: 3.0 |
±0.3 100.1℃ or higher: ±0.5 |
Descending: 10.0℃/min (128~-48℃) Rise: 10.0℃/min (-48~128℃) |
-70~150 |
3.0 100.1℃ or higher: 5.0 |
306 (width 630 x depth 540 x height 900) |
Descending: within 20 minutes (20~-70℃) Rising: within 20 minutes (20~150℃) |
|
|
EC-85EXT |
Available upon quote | Shelf support, shelf board, fuse, Y strainer, rubber plug, instruction manual | Constant temperature bath | Operation mode: Fixed value or program operation (Number of steps: 20 steps/1 pattern, number of repetitions: max. 98 times and infinite) | Water-cooled type, single stage compression refrigeration method + dual refrigeration method | Single stage side: R404A, dual side: (high temperature side) R404A, (low temperature side) R23 | Water amount: 5,000L/h (when cooling water inlet temperature is 32℃) ・Water pressure: 0.1~0.5MPa ・Pipe diameter (equipment side): Rc1 1/4 | 95 | Three phase 200V 50/60Hz | Observation window, tank light, cable hole (Φ50), casters, level adjuster | Dark gray finish | - | Width 1,470 x Depth 2,240 x Height 2,000 | 1,120 | Earth leakage circuit breaker, control circuit fuse, motor overload protection device, high voltage cutoff device, overtemperature rise prevention device, dry firing prevention device (constant temperature and humidity chamber only), heater overcurrent protection device, etc. |
2.0 100.1℃ or higher: 3.0 |
±0.3 100.1℃ or higher: ±0.5 |
Descending: 5.0℃/min (128~-48℃) Rise: 5.0℃/min (-48~128℃) |
-70~150 |
3.0 100.1℃ or higher: 5.0 |
800 (width 1,000 x depth 800 x height 1,000) |
Descending: within 30 minutes (20~-70℃) Rise: within 30 minutes (20~150℃) |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Kyushu Kiden Co., Ltd.
View more products of Kyushu Kiden Co., Ltd.
About Company Handling This Product
- Japan