Multi-volt (36V) cordless disc grinder (with brake) G3610DD/G3613DD
Kyushu Kiden Co., Ltd.
About This Product
■Maximum output increase
Maximum output and tenacity are increased by a control method that brings out the maximum performance of the motor.
■Improved dust resistance of ball bearings
Separate the ball bearing from the air path to reduce the risk of damage. Dust resistance*2.5 times higher.
*Comparison with our conventional product G3610DA. The numbers are for reference only.
■Improved switch dust and water resistance
The switch housing is laser welded with no gaps. Improved dust resistance and water resistance.
■Rotation return control*
After rotation stops during high-load work, if the load condition is improved within 1.5 seconds, rotation will automatically resume. No need to turn the switch back on.
*If the kickback reduction system is activated or depending on the load conditions, it may be necessary to turn the power off and on again.
■Small diameter body
The small head and lightweight and compact body allow for easy handling and efficient work.
■Equipped with continuously variable speed dial and auto mode function
・Continuously variable speed: The rotation speed can be continuously variable between 3,200 and 10,000 min-1 depending on the application.
・Auto mode: Automatically switches between low speed/5,500min-1 and high speed/10,000min-1 depending on the load, allowing for efficient work.
■3-way side handle installation
It can also be used for work in narrow spaces.
■Adopts tool-less foil guard
Equipped with a tool-less foil guard that can be fixed and released using a lever without using tools, improving usability.
■Easy-to-maintain dust filter adopted
Dust prevention has been greatly improved by using a mesh filter. Easy to replace and easy to maintain.
■Uses LED lights on both sides Patent pending
Equipped with high-brightness LED lights on both sides to improve visibility when cutting.
■System case (No.3) is included as standard (2XPZ) only
Convenient to carry.
■Kickback reduction system
By monitoring a sudden drop in motor rotation, it instantly stops the motor and reduces kickback.
■Restart prevention function
It will not work even if you insert a battery while the switch is on, which helps prevent unexpected accidents.
■Soft start
You can work comfortably by suppressing the recoil when starting.
-
Product
Multi-volt (36V) cordless disc grinder (with brake) G3610DD/G3613DD
-
Handling Company
Kyushu Kiden Co., Ltd.
-
Categories
4 Models of Multi-volt (36V) cordless disc grinder (with brake) G3610DD/G3613DD
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Ah | Aircraft dimensions (total length (excluding gear) x gear cover height) | Case | Charger Charging time | Charger model name | Concrete reinforcement S1 cutter/outer diameter | Concrete reinforcement cutting depth | Concrete reinforcement material | Concrete reinforcement thrust | Mass (excluding toy and side handle) | Motor | Multi-volt storage battery (BSL36A18X) | No-load rotation speed (20℃ fully charged) Auto mode | No-load rotation speed (20℃ when fully charged) Shift mode | Quick charger (UC18YDL2) | Rebar cutting cutting wheel/outer diameter | Rebar cutting material | Standard accessories | Storage battery model name | Storage battery voltage-capacity | Switch format | Toy mounting shaft dimensions diameter (thread pitch) x length | Toy size (outer diameter x maximum thickness x hole diameter) | Usable storage battery | Work amount per charge (estimate) Concrete reinforcement | Work amount per charge (estimate) Rebar cutting |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
G3610DD (2XPZ) |
Available upon quote | 2.5Ah (multi-volt) | 363×60mm | System case 3 | Approximately 19 minutes (practical charging) / Approximately 25 minutes (fully charged) | UC18YDL2 (with cooling function) | 100mm | 20mm | Concrete | 30N | 2.5kg (with BSL36A18X installed) | Dc brushless motor | 2 pieces | 5,500min-1 (times/min) | 3,200~10,000min-1 (times/min) | ● | 100mm | ⌀10mm reinforcing bar | Resinoid flexible toy, anti-vibration side handle, spanner, hex wrench, foil washer B3 [for diamond], battery cover | BSL36A18X | 36V-2.5Ah/18V-5.0Ah | Paddle type | 10 (1.5) ×11mm | 100×6×15mm | Multi-volt storage battery (with remaining capacity display) | Approximately 7.6m | Approximately 152 pieces |
|
|
G3610DD (NN) |
Available upon quote | 2.5Ah (multi-volt) | 363×60mm | Sold separately | Approximately 19 minutes (practical charging) / Approximately 25 minutes (fully charged) | UC18YDL2 (with cooling function) | 100mm | 20mm | Concrete | 30N | 2.5kg (with BSL36A18X installed) | Dc brushless motor | Sold separately | 5,500min-1 (times/min) | 3,200~10,000min-1 (times/min) | Sold separately | 100mm | ⌀10mm reinforcing bar | Resinoid flexible toy, anti-vibration side handle, spanner, hex wrench, foil washer B3 [for diamond], battery cover | BSL36A18X | 36V-2.5Ah/18V-5.0Ah | Paddle type | 10 (1.5) ×11mm | 100×6×15mm | Multi-volt storage battery (with remaining capacity display) | Approximately 7.6m | Approximately 152 pieces |
|
|
G3613DD (2XPZ) |
Available upon quote | 2.5Ah (multi-volt) | 363×71mm | System case 3 | Approximately 19 minutes (practical charging) / Approximately 25 minutes (fully charged) | UC18YDL2 (with cooling function) | 125mm | 20mm | Concrete | 30N | 2.7kg (with BSL36A18X installed) | Dc brushless motor | 2 pieces | 5,500min-1 (times/min) | 3,200~10,000min-1 (times/min) | ● | 125mm | ⌀10mm reinforcing bar | Resinoid flexible toy, anti-vibration side handle, spanner, hex wrench, battery cover | BSL36A18X | 36V-2.5Ah/18V-5.0Ah | Paddle type | 16 (2.0) ×13.5mm | 125×6×22mm | Multi-volt storage battery (with remaining capacity display) | Approximately 7.5m | Approximately 150 pieces |
|
|
G3613DD (NN) |
Available upon quote | 2.5Ah (multi-volt) | 363×71mm | Sold separately | Approximately 19 minutes (practical charging) / Approximately 25 minutes (fully charged) | UC18YDL2 (with cooling function) | 125mm | 20mm | Concrete | 30N | 2.7kg (with BSL36A18X installed) | Dc brushless motor | Sold separately | 5,500min-1 (times/min) | 3,200~10,000min-1 (times/min) | Sold separately | 125mm | ⌀10mm reinforcing bar | Resinoid flexible toy, anti-vibration side handle, spanner, hex wrench, battery cover | BSL36A18X | 36V-2.5Ah/18V-5.0Ah | Paddle type | 16 (2.0) ×13.5mm | 125×6×22mm | Multi-volt storage battery (with remaining capacity display) | Approximately 7.5m | Approximately 150 pieces |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Kyushu Kiden Co., Ltd.
View more products of Kyushu Kiden Co., Ltd.
About Company Handling This Product
- Japan