Multi-volt (36V) cordless disc grinder (with brake) G3610DC/G3613DC-G3610DC (2XPZ)

Multi-volt (36V) cordless disc grinder (with brake) G3610DC/G3613DC-G3613DC (2XPZ)

Multi-volt (36V) cordless disc grinder (with brake) G3610DC/G3613DC
Kyushu Kiden Co., Ltd.

Kyushu Kiden Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

37.5hours

Company Review

5.0

About This Product

■Maximum output increaseMaximum output and tenacity are increased by a control method that brings out the maximum performance of the motor.

■Improved dust resistance of ball bearingsSeparate the ball bearing from the air path to reduce the risk of damage. Dust resistance*2.5 times higher.
*Comparison with our conventional product G3610DA. The numbers are for reference only.

■Improved switch dust and water resistanceThe switch housing is laser welded with no gaps. Improved dust resistance and water resistance.

■Rotation return control*After rotation stops during high-load work, if the load condition is improved within 1.5 seconds, rotation will automatically resume. No need to turn the switch back on.
*If the kickback reduction system is activated or depending on the load conditions, it may be necessary to turn the power off and on again.

■Small diameter bodyThe small head and lightweight and compact body allow for easy handling and efficient work.

■Equipped with continuously variable speed dial and auto mode function・Continuously variable speed: The rotation speed can be continuously variable between 3,200 and 10,000 min-1 depending on the application.
・Auto mode: Automatically switches between low speed/5,500min-1 and high speed/10,000min-1 depending on the load, allowing for efficient work.

■3-way side handle installationIt can also be used for work in narrow spaces.

■Adopts tool-less foil guardEquipped with a tool-less foil guard that can be fixed and released using a lever without using tools, improving usability.

■Easy-to-maintain dust filter adoptedDust prevention has been greatly improved by using a mesh filter. Easy to replace and easy to maintain.

■Uses LED lights on both sides Patent pendingEquipped with high-brightness LED lights on both sides to improve visibility when cutting.

■System case (No.3) is included as standard (2XPZ) onlyConvenient to carry.

■Kickback reduction systemBy monitoring a sudden drop in motor rotation, it instantly stops the motor and reduces kickback.

■Restart prevention functionIt will not work even if you insert a battery while the switch is on, which helps prevent unexpected accidents.

■Soft startYou can work comfortably by suppressing the recoil when starting.

Model
There are 4 models for this product.

Product
Multi-volt (36V) cordless disc grinder (with brake) G3610DC/G3613DC

Handling Company
Kyushu Kiden Co., Ltd.

Categories

Machining / Machine Tools

Hand Grinders

Tools

Disc Grinders

250+ people viewing

Last viewed: 9 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

4 Models of Multi-volt (36V) cordless disc grinder (with brake) G3610DC/G3613DC

Click on the part number for more information about each product

Part Number	Price (excluding tax)	Rebar cutting material	Rebar cutting cutting wheel/outer diameter	Mass (excluding toy and side handle)	Storage battery voltage-capacity	Storage battery model name	No-load rotation speed (20℃ when fully charged) Shift mode	No-load rotation speed (20℃ fully charged) Auto mode	Aircraft dimensions (total length (excluding gear) x gear cover height)	Standard accessories	Quick charger (UC18YDL2)	Charger model name	Charger Charging time	Usable storage battery	Motor	Multi-volt storage battery (BSL36A18X)	Toy size (outer diameter x maximum thickness x hole diameter)	Toy mounting shaft dimensions diameter (thread pitch) x length	Switch format	Concrete reinforcement material	Concrete reinforcement thrust	Concrete reinforcement cutting depth	Concrete reinforcement S1 cutter/outer diameter	Case	Ah	Work amount per charge (estimate) Rebar cutting	Work amount per charge (estimate) Concrete reinforcement
G3610DC (2XPZ)	Available upon quote	⌀10mm reinforcing bar	100mm	2.5kg (with BSL36A18X installed)	36V-2.5Ah/18V-5.0Ah	BSL36A18X	3,200~10,000min-1 (times/min)	5,500min-1 (times/min)	363×60mm	Resinoid flexible toy, anti-vibration side handle, spanner, hex wrench, foil washer B3 [for diamond], battery cover	●	UC18YDL2 (with cooling function)	Approximately 19 minutes (practical charging) / Approximately 25 minutes (fully charged)	Multi-volt storage battery (with remaining capacity display)	Dc brushless motor	2 pieces	100×6×15mm	10 (1.5) ×11mm	Sliding type	Concrete	30N	20mm	100mm	System case 3	2.5Ah (multi-volt)	Approximately 152 pieces	Approximately 7.6m
G3610DC (NN)	Available upon quote	⌀10mm reinforcing bar	100mm	2.5kg (with BSL36A18X installed)	36V-2.5Ah/18V-5.0Ah	BSL36A18X	3,200~10,000min-1 (times/min)	5,500min-1 (times/min)	363×60mm	Resinoid flexible toy, anti-vibration side handle, spanner, hex wrench, foil washer B3 [for diamond], battery cover	Sold separately	UC18YDL2 (with cooling function)	Approximately 19 minutes (practical charging) / Approximately 25 minutes (fully charged)	Multi-volt storage battery (with remaining capacity display)	Dc brushless motor	Sold separately	100×6×15mm	10 (1.5) ×11mm	Sliding type	Concrete	30N	20mm	100mm	Sold separately	2.5Ah (multi-volt)	Approximately 152 pieces	Approximately 7.6m
G3613DC (2XPZ)	Available upon quote	⌀10mm reinforcing bar	125mm	2.7kg (with BSL36A18X installed)	36V-2.5Ah/18V-5.0Ah	BSL36A18X	3,200~10,000min-1 (times/min)	5,500min-1 (times/min)	363×71mm	Resinoid flexible toy, anti-vibration side handle, spanner, hex wrench, battery cover	●	UC18YDL2 (with cooling function)	Approximately 19 minutes (practical charging) / Approximately 25 minutes (fully charged)	Multi-volt storage battery (with remaining capacity display)	Dc brushless motor	2 pieces	125×6×22mm	16 (2.0) ×13.5mm	Sliding type	Concrete	30N	20mm	125mm	System case 3	2.5Ah (multi-volt)	Approximately 150 pieces	Approximately 7.5m
G3613DC (NN)	Available upon quote	⌀10mm reinforcing bar	125mm	2.7kg (with BSL36A18X installed)	36V-2.5Ah/18V-5.0Ah	BSL36A18X	3,200~10,000min-1 (times/min)	5,500min-1 (times/min)	363×71mm	Resinoid flexible toy, anti-vibration side handle, spanner, hex wrench, battery cover	Sold separately	UC18YDL2 (with cooling function)	Approximately 19 minutes (practical charging) / Approximately 25 minutes (fully charged)	Multi-volt storage battery (with remaining capacity display)	Dc brushless motor	Sold separately	125×6×22mm	16 (2.0) ×13.5mm	Sliding type	Concrete	30N	20mm	125mm	Sold separately	2.5Ah (multi-volt)	Approximately 150 pieces	Approximately 7.5m

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Mini mini straight die grinder 31020

Avant Co., Ltd.

$57.20

120+ people viewing

Hand Grinders

4 models listed

Mini Mini Angle Die Grinder Low Profile 38030

Avant Co., Ltd.

$67.60

120+ people viewing

Last viewed: 2 hours ago

Hand Grinders

3 models listed

Mini mini angle grinder 38010

Avant Co., Ltd.

$72.80

150+ people viewing

Hand Grinders

3 models listed

Micro Hand Grinder TWISTER Series

Sea Force Co., Ltd.

$161.20

390+ people viewing

Last viewed: 8 hours ago

Response time: 273.24 hours

Hand Grinders

12 models listed

Both foil brush and cup brush can be used with one unit

Nishiki Co., Ltd.

380+ people viewing

Last viewed: 5 hours ago

Response time: 10.76 hours

Hand Grinders

10 models listed

Micro Hand Grinder Evolution

Sea Force Co., Ltd.

$799.50

340+ people viewing

Last viewed: 22 hours ago

Response time: 273.24 hours

Hand Grinders

4 models listed

Micro Hand Grinder Evolution Use Attachment

Sea Force Co., Ltd.

$169.00

220+ people viewing

Last viewed: 5 hours ago

Response time: 273.24 hours

Hand Grinders

2 models listed

Powerful and noise-reducing grinder realizes accurate inserting Air Grinder Light

Yukosha Shito Trading Co., Ltd.

80+ people viewing

Last viewed: 7 hours ago

Response time: 8.67 hours

Hand Grinders

3 models listed

Low speed grinder TG-6000R

Japanese Corporation

$41.25

40+ people viewing

Last viewed: 5 hours ago

Response time: 31.52 hours

Hand Grinders

Hydraulic grinder GH-180U for metal cutting and cutting underwater and on land

Maruzen Kogyo Co., Ltd.

130+ people viewing

Last viewed: 13 hours ago

Response time: 33.16 hours

Hand Grinders

4 models listed

Handy shotter

Omi Industries Co., Ltd.

$572.00

120+ people viewing

Last viewed: 3 hours ago

Response time: 30.02 hours

Hand Grinders

Motor Motor Micro Hand Grinder EVO LUTION

Sea Force Co., Ltd.

$247.00

270+ people viewing

Last viewed: 3 hours ago

Response time: 273.24 hours

Hand Grinders

2 models listed

See More Hand Grinders Products

Other products of Kyushu Kiden Co., Ltd.

Reviews shown here are reviews of companies.

Inverter control V type Air dryer built-in/mounted package Bebicon (non-lube type)

Kyushu Kiden Co., Ltd.

5.0

320+ people viewing

Last viewed: 13 hours ago

Response time: 38.91 hours

Air Compressors

4 models listed

Air dryer built-in/equipped package Bebicon (non-lube type)

Kyushu Kiden Co., Ltd.

5.0

440+ people viewing

Last viewed: 4 hours ago

Response time: 38.91 hours

Air Compressors

10 models listed

Package Bebicon (non-lube type)

Kyushu Kiden Co., Ltd.

5.0

450+ people viewing

Last viewed: 10 hours ago

Response time: 38.91 hours

Air Compressors

10 models listed

Air dryer built-in/equipped package Bebicon (lubrication type)

Kyushu Kiden Co., Ltd.

5.0

470+ people viewing

Last viewed: 10 hours ago

Response time: 38.91 hours

Air Compressors

10 models listed

Package Bebicon (refueling type)

Kyushu Kiden Co., Ltd.

5.0

440+ people viewing

Last viewed: 3 hours ago

Response time: 38.91 hours

Air Compressors

10 models listed

Medium pressure package with built-in air dryer Bebicon (lube type)

Kyushu Kiden Co., Ltd.

5.0

420+ people viewing

Last viewed: 9 hours ago

Response time: 38.91 hours

Air Compressors

8 models listed

Air dryer equipped medium pressure package Bebicon (non-lube type)

Kyushu Kiden Co., Ltd.

5.0

150+ people viewing

Last viewed: 13 hours ago

Response time: 38.91 hours

Air Compressors

2 models listed

Pressure switch type package Bebicon

Kyushu Kiden Co., Ltd.

5.0

260+ people viewing

Last viewed: 1 minute ago

Response time: 38.91 hours

Air Compressors

8 models listed

Lubrication type Bebicon Pressure switch type

Kyushu Kiden Co., Ltd.

5.0

560+ people viewing

Last viewed: 59 seconds ago

Response time: 38.91 hours

Air Compressors

10 models listed

Lubrication type Bebicon automatic unloader type

Kyushu Kiden Co., Ltd.

5.0

560+ people viewing

Last viewed: 13 hours ago

Response time: 38.91 hours

Air Compressors

10 models listed

Industrial IJ printer Gravis UX series for lowercase letters

Kyushu Kiden Co., Ltd.

5.0

370+ people viewing

Last viewed: 13 hours ago

Response time: 38.91 hours

Inkjet Printers

4 models listed

High efficiency permanent magnet motor (PM motor) IE4

Kyushu Kiden Co., Ltd.

5.0

650+ people viewing

Last viewed: 1 hour ago

Response time: 38.91 hours

Permanent Magnet Motors

30 models listed

View more products of Kyushu Kiden Co., Ltd.

About Company Handling This Product

Kyushu Kiden Co., Ltd.

Response Rate

100.0%

Response Time

37.5hrs

Company Review

5.0

Japan

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Multi-volt (36V) cordless disc grinder (with brake) G3610DC/G3613DC Kyushu Kiden Co., Ltd.

Kyushu Kiden Co., Ltd.'s Response Status

About This Product

■Maximum output increase

■Improved dust resistance of ball bearings

■Improved switch dust and water resistance

■Rotation return control*

■Small diameter body

■Equipped with continuously variable speed dial and auto mode function

■3-way side handle installation

■Adopts tool-less foil guard

■Easy-to-maintain dust filter adopted

■Uses LED lights on both sides Patent pending

■System case (No.3) is included as standard (2XPZ) only

■Kickback reduction system

■Restart prevention function

■Soft start

4 Models of Multi-volt (36V) cordless disc grinder (with brake) G3610DC/G3613DC

G3610DC (2XPZ)

G3610DC (NN)

G3613DC (2XPZ)

G3613DC (NN)

Customers who viewed this product also viewed

Other products of Kyushu Kiden Co., Ltd.

About Company Handling This Product

Related search keywords

Multi-volt (36V) cordless disc grinder (with brake) G3610DC/G3613DC
Kyushu Kiden Co., Ltd.