14.4V cordless impact driver WH14DDL2
Kyushu Kiden Co., Ltd.
About This Product
■3 striking parts. Good feeling and reduced come-out.
By changing the number of impact points from the traditional two to three, the hammer claw makes three small impacts per rotation, reducing vibration. Achieves a good feeling and reduces come-out. Ideal for tightening work with small loads such as short screws and thin screws. Furthermore, it has a mode switching function to support a variety of tasks.
■ Fastest screw tightening speed in its class
When under high load, the number of strikes is automatically controlled, and by skipping one hammer claw and delivering 1.5 strikes per rotation, the hammer travels longer and dramatically increases striking energy. Achieves the fastest screw tightening speed in its class and the largest tightening torque in its class. Ideal for tightening long screws and thick screws.
■Fastest in class
・Tightening speed: approx. 20% UP
・Conditions: Nagesibis ø5.3 x 120mm Lauan material, no pilot hole
■Largest in class
Tightening torque: 172N m
■Improved cooling efficiency and optimal new air path design
Efficiently cools the motor and hammer case, increasing durability.
■Improve work efficiency and center balance design
By positioning the center of gravity near the middle finger of the handle grip, the machine is well balanced and reduces the burden on the operator.
■Dustproof/waterproof
With a special wind window structure that prevents dust from entering, and a full resin coating on the main parts, it has dust and water resistance with an IP56 protection rating, reducing damage to the product even in dusty sites or unexpected rain.
■Active control system
Our proprietary control technology provides the fastest screw tightening speed in its class* and reduces cam-out.
As of July 2015. At a domestic power tool manufacturer. (According to our research) (18V/14.4V cordless impact driver)
■Features
・With LED light
・With battery level display
・Uses high capacity 6.0Ah battery. Even more work
■Redesigned case with large capacity accessory case
The design has been completely redesigned to make it more stylish. Although it is compact, the case has a large capacity of 2.3L. Can store 300mm flexible shafts, long bits, L-shaped adapters, drill bits, etc. (Bits and screws are sold separately)
■Features
・Maximum torque 172N･m
・Equipped with brushless motor (e-motor)
-
Product
14.4V cordless impact driver WH14DDL2
-
Handling Company
Kyushu Kiden Co., Ltd.
-
Categories
2 Models of 14.4V cordless impact driver WH14DDL2
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Aircraft dimensions (overall length x overall height x center height) | Case | Charger model name | Lithium ion battery | Mass | Maximum tightening torque | No-load rotation speed Normal mode | No-load rotation speed Soft mode | No-load rotation speed Tex mode | No-load speed Power mode | Number of blows Normal mode | Number of blows Power mode | Number of blows Soft mode | Number of blows Tex mode | Quick charger (UC18YDL2) | Standard accessories | Storage battery 6.0Ah charging time | Storage battery 6.0Ah model name | Storage battery 6.0Ah voltage | Tightening ability TEX screw | Tightening capacity High strength bolt | Tightening capacity Machine screw | Tightening capacity Normal bolt | Width across flats of hexagonal shaft |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
WH14DDL2 (2LYPK) |
Available upon quote | 127×237×29mm (with storage battery installed) | ● | UC18YDL2 (with cooling function) | 6.0Ah (BSL1460) ×2 pieces | 1.4kg (with BSL1460 installed) | 172N・m (1,754kgf・cm) | 0~2,800min-1 (times/min) | 0~900min-1 (times/min) | 0~2,800min-1 (times/min) | 0~2,800min-1 (times/min) | 0~3,900min-1 (times/min) | 0~3,900min-1 (times/min) | 0~1,800min-1 (times/min) | 0~1,900min-1 (times/min) | ● | Rapid charger (with cooling function), case, spare battery, battery cover | Approximately 30 minutes (when using UC18YDL2) | BSL1460 (cooling compatible) | 14V | Ø3.5~ø6mm | M5~M14 | 4~8mm | M5~M16 | 6.35mm |
|
|
WH14DDL2 (NN) |
Available upon quote | 127×237×29mm (with storage battery installed) | ● | UC18YDL2 (with cooling function) | 6.0Ah (BSL1460) ×2 pieces | 1.4kg (with BSL1460 installed) | 172N・m (1,754kgf・cm) | 0~2,800min-1 (times/min) | 0~900min-1 (times/min) | 0~2,800min-1 (times/min) | 0~2,800min-1 (times/min) | 0~3,900min-1 (times/min) | 0~3,900min-1 (times/min) | 0~1,800min-1 (times/min) | 0~1,900min-1 (times/min) | ● | Rapid charger (with cooling function), case, spare battery, battery cover | Approximately 30 minutes (when using UC18YDL2) | BSL1460 (cooling compatible) | 14V | Ø3.5~ø6mm | M5~M14 | 4~8mm | M5~M16 | 6.35mm |
Click on the part number for more information about each product
Customers who viewed this product also viewed
![[Visualization of screw tightening] Retrofitted pokayoke sensor compatible with electric screwdriver G/GX-Sun Techno Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/6QVrxzNCwCSYMZJIDMsxQspFgdLKClro.png)
![[DX] Electric screwdriver/Pokayoke sensor S-ASED-G-Sun Techno Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/xk9L8jNjI1kOWfniZlfU0Eef21awJqLx.png)
![[Retrofit] Torque driver/retrofit pokayoke sensor RT/CT-Sun Techno Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/2Pflh8lQRAINVZBjhaSmL6XQ10zoB2An.png)
Other products of Kyushu Kiden Co., Ltd.
View more products of Kyushu Kiden Co., Ltd.
About Company Handling This Product
- Japan