Hoist Equipped with load swing suppression function as standard V8 series (Type 4)
Kyushu Kiden Co., Ltd.
About This Product
■Variable speed pushbutton has 2-stage motion
The first stage is a low speed setting, and the second stage is a high speed setting. Both low and high speeds can be set independently to any desired speed.
■Less vibration of the suspended load
Cushion start/stop reduces the shock when starting and stopping, reducing the vibration of the lifted load and the shock to buildings and crane girders.
■Smooth running reduces load swing
By smoothing acceleration and deceleration, swinging of the suspended load can be reduced.
■Mitigating shock to mechanical parts
Since the brake is applied when the motor rotation is low, there is less wear on the lining, and there is less impact on mechanical parts such as wire ropes, sheaves, couplings, and gears, resulting in a longer life.
■Equipped with load swing suppression function as standard
Inverter drive reduces swinging of the lifted load, but when transporting the lifted load, due to inertia, the load swings when stopped. Depending on how the lifted load swings, the operator can perform follow-up operations, or so-called follow-up notch operations, to suppress the occurrence of load swing, but this operation is difficult for inexperienced operators.
Therefore, we have installed a ``load swing suppression function'' as standard, which can automatically suppress the occurrence of load swing by using a function equivalent to a follow-up notch operation, even if you do not perform a follow-up notch operation. This function allows even inexperienced operators to operate the machine while suppressing load swing, allowing the lifted load to be quickly transported to the desired location.
■With overload prevention function
If the load exceeds the rating, hoisting will stop.
Note: Overload detection may vary from 100 to 125% of the rated load depending on the operating frequency, power supply voltage, and motor temperature.
■With light load high speed function
When the load is light (0 to 30% load), high-speed operation is automatically selected at 1.5 times the rated speed.
Note 1: The maximum load that is considered a light load may vary from 30 to 40% of the rated load depending on the operating frequency, power supply voltage, and motor temperature.
Note 2: Some models cannot be equipped with light load high speed for special high head, so please contact us separately.
Note 3: The light load high speed function cannot be used when co-hanging. Please contact us separately for details.
■With electronic limit switch function
The hook position is detected and the cushion stops automatically at the position set for hoisting/lowering operation. (You can easily set the upper and lower limits according to your usage. They are not set at the time of shipment.)
-
Product
Hoist Equipped with load swing suppression function as standard V8 series (Type 4)
-
Handling Company
Kyushu Kiden Co., Ltd.
-
Categories
6 Models of Hoist Equipped with load swing suppression function as standard V8 series (Type 4)
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Ambient temperature | Compliant standards | Hoisting inverter motor number of poles | Hoisting inverter motor output (kW) | Hoisting inverter rated current (A) | Hoisting inverter speed (m/min) | Hoisting inverter speed (m/s) | Humidity | Lifting height Normal type (m) | Lifting height double rail (m) | Lifting load (t) | Operating voltage | Paint color | Power supply (three phase) | Power supply method | Protective structure | Rated load (t) | Repeat rating (load rate ≦0.63) Traversal | Repetitive rating (load rate≦0.63) Hoisting | Traversal Number of motor poles | Traverse inverter double rail motor output | Traverse inverter double rail rated current | Traverse inverter normal type/low head motor output | Traverse inverter normal type/low head rated current | Traverse inverter speed (m/min) | Traverse inverter speed (m/s) | Wire rope double rail | Wire rope normal type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Power supply voltage 200V class, rated load 15t |
Available upon quote | -10℃~40℃ (no freezing) | JIS C9620 (electric hoist), crane structure standard | 4 | 16 |
200V50Hz:70.0 200V60Hz:69.0 220V60Hz:63.0 |
2 speed type: 0.6~6.0[9.0] 1 speed type: 6.0 [9.0] |
2 speed type: 0.01~0.10[0.15] 1 speed type: 0.10[0.15] |
90% or less (no condensation) |
Low lift: 8 High head: 12 |
Low lift: 8 High head: 12 |
15.2 | AC200V or AC220V (depending on power supply voltage) | Munsell 2.5B 2.5/1 | AC200V 50Hz, AC200V 60Hz, AC220V 60Hz | Cable power supply (for contact type current collectors, bus ducts, etc., be sure to use double trolleys) | JIS C0920 IP44 | 15 |
Starting frequency: 400 times/h Load time rate: 40%ED |
Starting frequency: 400 times/h Load time rate: 40%ED |
Normal form: 4 Double rail: 4 |
0.55kW×2 |
200V50Hz:1.7A×2 200V60Hz:1.5A×2 220V60Hz:1.4A×2 |
0.55kW×2 |
200V50Hz:1.8A×2 200V60Hz:1.7A×2 220V60Hz:1.7A×2 |
2 speed type: 1.7~17 1 speed type: 17 |
2 speed type: 0.028~0.283 1 speed type: 0.283 |
Multiplication number: 4 Configuration: 6×Fi (29) -B Diameter (mm):φ20 |
Multiplication number: 4 Configuration: 6×Fi (29) -B Diameter (mm):φ20 |
|
|
Power supply voltage 200V class, rated load 20t |
Available upon quote | -10℃~40℃ (no freezing) | JIS C9620 (electric hoist), crane structure standard | 4 | 18 |
200V50Hz:78.0 200V60Hz:77.0 220V60Hz:71.0 |
2 speed type: 0.5~5.0[7.5] 1 speed type: 5.0[7.5] |
2 speed type: 0.008~0.083[0.125] 1 speed type: 0.083[0.125] |
90% or less (no condensation) |
Low lift: NULL High head: 12 |
Low lift: NULL High head: 12 |
20.3 | AC200V or AC220V (depending on power supply voltage) | Munsell 2.5B 2.5/1 | AC200V 50Hz, AC200V 60Hz, AC220V 60Hz | Cable power supply (for contact type current collectors, bus ducts, etc., be sure to use double trolleys) | JIS C0920 IP44 | 20 |
Starting frequency: 400 times/h Load time rate: 40%ED |
Starting frequency: 400 times/h Load time rate: 40%ED |
Normal form: 4 Double rail: 4 |
0.55kW×2 |
200V50Hz:2.2A×2 200V60Hz:1.8A×2 220V60Hz:1.8A×2 |
0.55kW×2 |
200V50Hz:1.8A×2 200V60Hz:1.7A×2 220V60Hz:1.7A×2 |
2 speed type: 1.7~17 1 speed type: 17 |
2 speed type: 0.028~0.283 1 speed type: 0.283 |
Multiplication number: 4 Configuration: 6×Fi (29) -B Diameter (mm):φ22.4 |
Multiplication number: 4 Configuration: 6×Fi (29) -B Diameter (mm):φ22.4 |
|
|
Power supply voltage 200V class, rated load 30t |
Available upon quote | -10℃~40℃ (no freezing) | JIS C9620 (electric hoist), crane structure standard | 4 | 18 |
200V50Hz:82.0 200V60Hz:81.0 220V60Hz:73.0 |
2 speed type: 0.33~3.3[5.0] 1 speed type: 3.3 [5.0] |
2 speed type: 0.006~0.055[0.083] 1 speed type: 0.055[0.083] |
90% or less (no condensation) | - |
Low lift: NULL High head: 12 |
30.4 | AC200V or AC220V (depending on power supply voltage) | Munsell 2.5B 2.5/1 | AC200V 50Hz, AC200V 60Hz, AC220V 60Hz | Cable power supply (for contact type current collectors, bus ducts, etc., be sure to use double trolleys) | JIS C0920 IP44 | 30 |
Starting frequency: 400 times/h Load time rate: 40%ED |
Starting frequency: 400 times/h Load time rate: 40%ED |
Normal form: NULL Double rail: 4 |
0.84kW×2 |
200V50Hz:3.3A×2 200V60Hz:2.7A×2 220V60Hz:2.7A×2 |
- | - |
2 speed type: 1.7~17 1 speed type: 17 |
2 speed type: 0.028~0.283 1 speed type: 0.283 |
Multiplication number: 4 Configuration: 6×Fi (29) -B Diameter (mm):φ20 |
- |
|
|
Power supply voltage 400V class, rated load 15t |
Available upon quote | -10℃~40℃ (no freezing) | JIS C9620 (electric hoist), crane structure standard | 4 | 16 |
400V50Hz:34.0 400V60Hz:34.5 420V60Hz:32.0 |
2 speed type: 0.6~6.0[9.0] 1 speed type: 6.0 [9.0] |
2 speed type: 0.01~0.10[0.15] 1 speed type: 0.10[0.15] |
90% or less (no condensation) |
Low lift: 8 High head: 12 |
Low lift: 8 High head: 12 |
15.2 | AC200V (via built-in down transformer) | Munsell 2.5B 2.5/1 | AC380V 50Hz, AC400V 50Hz, AC415V 50Hz, AC380V 60Hz, AC400V 60Hz, AC440V 60Hz, AC460V 60Hz, AC480V 60Hz | Cable power supply (for contact type current collectors, bus ducts, etc., be sure to use double trolleys) | JIS C0920 IP44 | 15 |
Starting frequency: 400 times/h Load time rate: 40%ED |
Starting frequency: 400 times/h Load time rate: 40%ED |
Normal form: 4 Double rail: 4 |
0.55kW×2 |
400V50Hz:1.1A×2 400V60Hz:1.1A×2 420V60Hz:1.1A×2 |
0.55kW×2 |
400V50Hz:1.1A×2 400V60Hz:1.1A×2 420V60Hz:1.1A×2 |
2 speed type: 1.7~17 1 speed type: 17 |
2 speed type: 0.028~0.283 1 speed type: 0.283 |
Multiplication number: 4 Configuration: 6×Fi (29) -B Diameter (mm):φ20 |
Multiplication number: 4 Configuration: 6×Fi (29) -B Diameter (mm):φ20 |
|
|
Power supply voltage 400V class, rated load 20t |
Available upon quote | -10℃~40℃ (no freezing) | JIS C9620 (electric hoist), crane structure standard | 4 | 18 |
400V50Hz:38.0 400V60Hz:37.0 420V60Hz:36.0 |
2 speed type: 0.5~5.0[7.5] 1 speed type: 5.0[7.5] |
2 speed type: 0.008~0.083[0.125] 1 speed type: 0.083[0.125] |
90% or less (no condensation) |
Low lift: NULL High head: 12 |
Low lift: NULL High head: 12 |
20.3 | AC200V (via built-in down transformer) | Munsell 2.5B 2.5/1 | AC380V 50Hz, AC400V 50Hz, AC415V 50Hz, AC380V 60Hz, AC400V 60Hz, AC440V 60Hz, AC460V 60Hz, AC480V 60Hz | Cable power supply (for contact type current collectors, bus ducts, etc., be sure to use double trolleys) | JIS C0920 IP44 | 20 |
Starting frequency: 400 times/h Load time rate: 40%ED |
Starting frequency: 400 times/h Load time rate: 40%ED |
Normal form: 4 Double rail: 4 |
0.55kW×2 |
400V50Hz:1.2A×2 400V60Hz:1.1A×2 420V60Hz:1.1A×2 |
0.55kW×2 |
400V50Hz:1.2A×2 400V60Hz:1.1A×2 420V60Hz:1.1A×2 |
2 speed type: 1.7~17 1 speed type: 17 |
2 speed type: 0.028~0.283 1 speed type: 0.283 |
Multiplication number: 4 Configuration: 6×Fi (29) -B Diameter (mm):φ22.4 |
Multiplication number: 4 Configuration: 6×Fi (29) -B Diameter (mm):φ22.4 |
|
|
Power supply voltage 400V class, rated load 30t |
Available upon quote | -10℃~40℃ (no freezing) | JIS C9620 (electric hoist), crane structure standard | 4 | 18 |
400V50Hz:41.0 400V60Hz:40.0 420V60Hz:36.0 |
2 speed type: 0.33~3.3[5.0] 1 speed type: 3.3 [5.0] |
2 speed type: 0.006~0.055[0.083] 1 speed type: 0.055[0.083] |
90% or less (no condensation) | - |
Low lift: NULL High head: 12 |
30.4 | AC200V (via built-in down transformer) | Munsell 2.5B 2.5/1 | AC380V 50Hz, AC400V 50Hz, AC415V 50Hz, AC380V 60Hz, AC400V 60Hz, AC440V 60Hz, AC460V 60Hz, AC480V 60Hz | Cable power supply (for contact type current collectors, bus ducts, etc., be sure to use double trolleys) | JIS C0920 IP44 | 30 |
Starting frequency: 400 times/h Load time rate: 40%ED |
Starting frequency: 400 times/h Load time rate: 40%ED |
Normal form: NULL Double rail: 4 |
0.84kW×2 |
400V50Hz:1.4A×2 400V60Hz:1.3A×2 420V60Hz:1.1A×2 |
- | - |
2 speed type: 1.7~17 1 speed type: 17 |
2 speed type: 0.028~0.283 1 speed type: 0.283 |
Multiplication number: 4 Configuration: 6×Fi (29) -B Diameter (mm):φ20 |
- |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Kyushu Kiden Co., Ltd.
View more products of Kyushu Kiden Co., Ltd.
About Company Handling This Product
- Japan