All Categories

History

  1. Metoree
  2. Machining / Machine Tools
  3. Rolling Machines
  4. Knurling with less interference QUICK Rolling knurling tool Rolling knurling for automatic lathe shoulder machining F712-08U,10U,12U-LD (Yamada Machine Tool Co., Ltd.)
Knurling with less interference QUICK Rolling knurling tool Rolling knurling for automatic lathe shoulder machining F712-08U,10U,12U-LD-F712-08U-LD
Knurling with less interference QUICK Rolling knurling tool Rolling knurling for automatic lathe shoulder machining F712-08U,10U,12U-LD-Yamada Machine Tool Co., Ltd.

Knurling with less interference QUICK Rolling knurling tool Rolling knurling for automatic lathe shoulder machining F712-08U,10U,12U-LD
Yamada Machine Tool Co., Ltd.

About This Product

■Features

・Both flat and cross stitches can be processed on workpieces of φ45 or smaller. - A holder designed to allow knurling up to the edge of the step. - The head has been made smaller and optimized for use with Swiss-type automatic lathes. ・If you are not going to perform edge machining, we recommend the F711 type, which has higher rigidity.

■Two pieces (double wheel) type

For crosshairs (diamond, cross) / sole (straight)

■Knurling pattern that can be processed

・Flat/Straight (RAA) ・Diagonal right/Spiral R30° (RBR30°) ・Oblique left/Spiral L30° (RBL30°) ・Diagonal right/Spiral R45° (RBR45°) ・Oblique left/Spiral L45° (RBL45°) ・Fresh eye/diamond pattern 30° (RGE30°) ・Fresh eye/cross pattern 45° (RGE45°)

■Supported pitch

0.5-1.0mm *Supported pitch varies depending on the wheel and pattern used.

■Main equipment that can be installed

・Swiss type automatic lathe ・Small turret lathe ・Desk lathe etc.

■Cutting knurling tools cannot be used. In such cases, there is a rolling knurling tool.

Every day, we receive inquiries from customers who are looking for knurling tools. A frequently asked question is which is better: cutting or rolling. We recommend cutting first because it gives a nice finish and is relatively easy to set up. However, there are some workpieces for which cutting knurling tools cannot be used. In such cases, we recommend rolling knurling tools. (The lineup of rolling knurling tools has been updated in 2018)

  • Product

    Knurling with less interference QUICK Rolling knurling tool Rolling knurling for automatic lathe shoulder machining F712-08U,10U,12U-LD

Share this product


210+ people viewing

Last viewed: 22 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

3 Models of Knurling with less interference QUICK Rolling knurling tool Rolling knurling for automatic lathe shoulder machining F712-08U,10U,12U-LD

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Compatible machining diameter Ø (mm) Name Wheel (Ø x w x b) (mm) Order model number (left hand) Order model number (right hand)
Knurling with less interference QUICK Rolling knurling tool Rolling knurling for automatic lathe shoulder machining F712-08U,10U,12U-LD-Part Number-F712-08U-LD

F712-08U-LD

Available upon quote

3-45

F712-08U-LD

9.8x3.5x6A7.5

Common for left and right hand

32000375

Knurling with less interference QUICK Rolling knurling tool Rolling knurling for automatic lathe shoulder machining F712-08U,10U,12U-LD-Part Number-F712-10U-LD

F712-10U-LD

Available upon quote

3-45

F712-10U-LD

9.8x3.5x6A7.5

Common for left and right hand

32000419

Knurling with less interference QUICK Rolling knurling tool Rolling knurling for automatic lathe shoulder machining F712-08U,10U,12U-LD-Part Number-F712-12U-LD

F712-12U-LD

Available upon quote

3-45

F712-12U-LD

9.8x3.5x6A7.5

Common for left and right hand

32000420

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Micro 3 die rolling machine Micro Roll-Mishima Shoji Ltd.

Micro 3 die rolling machine Micro Roll

Mishima Shoji Ltd.

220+ people viewing

Last viewed: 5 hours ago

Rolling Machines
Counter flow rolling machine CT-400-N.H.K. Builder Co., Ltd.

Counter flow rolling machine CT-400

N.H.K. Builder Co., Ltd.

290+ people viewing

Last viewed: 4 hours ago

Rolling Machines

2 models listed

Counterflow rolling machine CT-400E-N.H.K. Builder Co., Ltd.

Counterflow rolling machine CT-400E

N.H.K. Builder Co., Ltd.

210+ people viewing

Last viewed: 4 hours ago

Rolling Machines

2 models listed

Counter flow rolling machine CT-600-N.H.K. Builder Co., Ltd.

Counter flow rolling machine CT-600

N.H.K. Builder Co., Ltd.

210+ people viewing

Last viewed: 4 hours ago

Rolling Machines

2 models listed

Counter flow rolling machine CT-600E-N.H.K. Builder Co., Ltd.

Counter flow rolling machine CT-600E

N.H.K. Builder Co., Ltd.

160+ people viewing

Last viewed: 5 hours ago

Rolling Machines

2 models listed

Counter flow rolling machine PCT-1000-N.H.K. Builder Co., Ltd.

Counter flow rolling machine PCT-1000

N.H.K. Builder Co., Ltd.

200+ people viewing

Last viewed: 4 hours ago

Rolling Machines

2 models listed

Rolling drive type using AC servo motor + ball screw. Counter flow rolling machine PCT-1000E-N.H.K. Builder Co., Ltd.

Rolling drive type using AC servo motor + ball screw. Counter flow rolling machine PCT-1000E

N.H.K. Builder Co., Ltd.

190+ people viewing

Last viewed: 4 hours ago

Rolling Machines

2 models listed

The definitive version of the 36-inch rolling machine. PCT-1000 has further evolved. Counter flow rolling machine PCT-1000hbc-N.H.K. Builder Co., Ltd.

The definitive version of the 36-inch rolling machine. PCT-1000 has further evolved. Counter flow rolling machine PCT-1000hbc

N.H.K. Builder Co., Ltd.

170+ people viewing

Last viewed: 26 minutes ago

Rolling Machines

2 models listed

Even higher rigidity and precision. Aiming for the fastest and strongest rolling machine. Counter flow rolling machine CT-400hbc-N.H.K. Builder Co., Ltd.

Even higher rigidity and precision. Aiming for the fastest and strongest rolling machine. Counter flow rolling machine CT-400hbc

N.H.K. Builder Co., Ltd.

200+ people viewing

Last viewed: 22 hours ago

Rolling Machines

2 models listed

Process-intensive rolling thread processing ARC thread rolling head-Yamada Machine Tool Co., Ltd.

Process-intensive rolling thread processing ARC thread rolling head

Yamada Machine Tool Co., Ltd.

310+ people viewing

Response time: 15.00 hours

Rolling Machines

2 models listed

Knurling with less interference QUICK Rolling knurling tool Rolling knurling compatible with all patterns F712-10,12,16-Yamada Machine Tool Co., Ltd.

Knurling with less interference QUICK Rolling knurling tool Rolling knurling compatible with all patterns F712-10,12,16

Yamada Machine Tool Co., Ltd.

250+ people viewing

Last viewed: 18 hours ago

Response time: 15.00 hours

Rolling Machines

3 models listed

Knurling with less interference QUICK Rolling knurling tool Rolling knurling for shoulder machining F712-20U,25U-Yamada Machine Tool Co., Ltd.

Knurling with less interference QUICK Rolling knurling tool Rolling knurling for shoulder machining F712-20U,25U

Yamada Machine Tool Co., Ltd.

240+ people viewing

Last viewed: 4 hours ago

Response time: 15.00 hours

Rolling Machines

2 models listed

See More Rolling Machines Products

Other products of Yamada Machine Tool Co., Ltd.

Reviews shown here are reviews of companies.

Low load, high quality knurling QUICK Cutting knurling tool Flat knurling for small diameter machining C601-08,10,12,16-N-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK Cutting knurling tool Flat knurling for small diameter machining C601-08,10,12,16-N

Yamada Machine Tool Co., Ltd.

340+ people viewing

Response time: 15.00 hours

Toolholders

8 models listed

Low load, high quality knurling QUICK Cutting knurling tool Flat knurling for small diameter machining C601-08,10,12,16-NB-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK Cutting knurling tool Flat knurling for small diameter machining C601-08,10,12,16-NB

Yamada Machine Tool Co., Ltd.

460+ people viewing

Last viewed: 47 minutes ago

Response time: 15.00 hours

Cutting Tools

4 models listed

Low load, high quality knurling QUICK Cutting knurling tool Cutting knurling for flat grain C601-16,20,25-N-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK Cutting knurling tool Cutting knurling for flat grain C601-16,20,25-N

Yamada Machine Tool Co., Ltd.

500+ people viewing

Last viewed: 3 hours ago

Response time: 15.00 hours

Cutting Tools

3 models listed

Low load, high quality knurling QUICK cutting knurling tool Flat knurling for machining large diameter workpieces C621-27-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK cutting knurling tool Flat knurling for machining large diameter workpieces C621-27

Yamada Machine Tool Co., Ltd.

200+ people viewing

Last viewed: 7 hours ago

Response time: 15.00 hours

Cutting Tools
Low load, high quality knurling QUICK Cutting knurling tool Knurling for cutting cross stitch C602-10,12,16-N-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK Cutting knurling tool Knurling for cutting cross stitch C602-10,12,16-N

Yamada Machine Tool Co., Ltd.

320+ people viewing

Last viewed: 9 hours ago

Response time: 15.00 hours

Cutting Tools

3 models listed

Low load, high quality knurling QUICK cutting knurling tool Cross-grain knurling C602-10,12,16-NB-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK cutting knurling tool Cross-grain knurling C602-10,12,16-NB

Yamada Machine Tool Co., Ltd.

350+ people viewing

Response time: 15.00 hours

Cutting Tools

3 models listed

Low load, high quality knurling QUICK Cutting knurling tool Lathe cross-grain knurling C602-16,20,25-N-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK Cutting knurling tool Lathe cross-grain knurling C602-16,20,25-N

Yamada Machine Tool Co., Ltd.

370+ people viewing

Last viewed: 11 hours ago

Response time: 15.00 hours

Cutting Tools

3 models listed

High Tensile Aluminum Coolant & Air Hose Piranha Clamp Piranha Cooling Line-Yamada Machine Tool Co., Ltd.

High Tensile Aluminum Coolant & Air Hose Piranha Clamp Piranha Cooling Line

Yamada Machine Tool Co., Ltd.

2160+ people viewing

Last viewed: 5 hours ago

Response time: 15.00 hours

Air Blow Nozzles

636 models listed

Low load, high quality knurling QUICK cutting knurling tool Cross-grain knurling for large workpieces C622-40R,57R-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK cutting knurling tool Cross-grain knurling for large workpieces C622-40R,57R

Yamada Machine Tool Co., Ltd.

230+ people viewing

Response time: 15.00 hours

Rotary Tools

4 models listed

Low load, high quality knurling QUICK cutting knurling tool 3-piece cutting knurling C693-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK cutting knurling tool 3-piece cutting knurling C693

Yamada Machine Tool Co., Ltd.

240+ people viewing

Last viewed: 19 hours ago

Response time: 15.00 hours

Cutting Tools

2 models listed

Knurling with less interference QUICK Rolling knurling tool Small rolling knurling for flat grain F701-10,12,16-Yamada Machine Tool Co., Ltd.

Knurling with less interference QUICK Rolling knurling tool Small rolling knurling for flat grain F701-10,12,16

Yamada Machine Tool Co., Ltd.

430+ people viewing

Response time: 15.00 hours

6 models listed

Knurling with less interference QUICK Rolling knurling tool Rolling knurling for shoulder machining F712-20U,25U-Yamada Machine Tool Co., Ltd.

Knurling with less interference QUICK Rolling knurling tool Rolling knurling for shoulder machining F712-20U,25U

Yamada Machine Tool Co., Ltd.

240+ people viewing

Last viewed: 4 hours ago

Response time: 15.00 hours

Rolling Machines

2 models listed


View more products of Yamada Machine Tool Co., Ltd.

About Company Handling This Product

Yamada Machine Tool Co., Ltd.

  • Japan

Related search keywords

Rolling Machines
Rolling Machines　Yamada Machine Tool Co., Ltd.
Yamada Machine Tool Co., Ltd.

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree