All Categories
History
Response Rate
100.0%
Response Time
144.2hours
Product
Fixed small liquid filling machine β10FS series (for various small plastics)Handling Company
Kaihatsu Giken Co., Ltd.Categories
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Control part | Filling unit | Filter housing | Jig | Model | Necessary equipment | Option | Power supply | Pump | Scale | Target container | Trestle | Wetted parts |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Β10FS1 |
Available upon quote |
・Sequencer control -Easy operation with just 3 push buttons and a selector switch to change the driving mode. - For centrifugal pumps and diaphragm pumps, there is a selector switch that allows you to switch the pump strength between low, medium, and high. |
・Filling nozzle fixed type ・Dripless nozzle made of PVC (or SUS304) strongly prevents dripping ・Since the nozzle is fixed, there is almost no dripping, so there is no liquid pan. |
None |
- Can be used with various containers by replacing the fixture at the tip of the jig according to the container. ・We will use a 3D printer to create and attach the most suitable fixing device for your specified container. |
Electric servo motor, dead weight drop model without pump | Compressed air of 0.6 MPa or higher is required at the installation location (not required for electric servo motor models). In the case of a diaphragm pump, a compressor with 1 horsepower or more (approximately 750W or more) is required separately. |
Some models allow you to manually change the height of the filling nozzle. 2- and 3-row models are also available. |
Single phase 100V15A outlet |
- You can choose from without pump (dropping by its own weight), centrifugal pump (200W), and small diaphragm pump. ・Wetted parts are polypropylene, fluororesin, and ceramics. |
Uses A&D scales |
・By replacing the filling nozzle and the fixing part of the jig, it can be used for plastic containers of about 100ml to 4L. - You can switch the pump strength to weak, medium, or strong according to the container. |
Stainless steel (SUS304) welded frame. Can be moved by casters with brakes. This model can also be installed on a tabletop. |
・PVC, polypropylene, ceramics, EPDM rubber, fluororubber (for non-metallic models) - Stainless steel sanitary specifications are also available. |
|
|
Β10FS2 |
Available upon quote |
・Sequencer control -Easy operation with just 3 push buttons and a selector switch to change the driving mode. - For centrifugal pumps and diaphragm pumps, there is a selector switch that allows you to switch the pump strength between low, medium, and high. |
・Filling nozzle fixed type ・Dripless nozzle made of PVC (or SUS304) strongly prevents dripping ・Since the nozzle is fixed, there is almost no dripping, so there is no liquid pan. |
None |
- Can be used with various containers by replacing the fixture at the tip of the jig according to the container. ・We will use a 3D printer to create and attach the most suitable fixing device for your specified container. |
Model with air actuator and pump | Compressed air of 0.6 MPa or higher is required at the installation location (not required for electric servo motor models). In the case of a diaphragm pump, a compressor with 1 horsepower or more (approximately 750W or more) is required separately. |
Some models allow you to manually change the height of the filling nozzle. 2- and 3-row models are also available. |
Single phase 100V15A outlet |
- You can choose from without pump (dropping by its own weight), centrifugal pump (200W), and small diaphragm pump. ・Wetted parts are polypropylene, fluororesin, and ceramics. |
Uses A&D scales |
・By replacing the filling nozzle and the fixing part of the jig, it can be used for plastic containers of about 100ml to 4L. - You can switch the pump strength to weak, medium, or strong according to the container. |
Stainless steel (SUS304) welded frame. Can be moved by casters with brakes. This model can also be installed on a tabletop. |
・PVC, polypropylene, ceramics, EPDM rubber, fluororubber (for non-metallic models) - Stainless steel sanitary specifications are also available. |
Click on the part number for more information about each product
