All Categories

History

Call chime/buzzer/bell EZ-CALL (wired LAN type)-EZ-CALL-20
Call chime/buzzer/bell EZ-CALL (wired LAN type)-Real System Co., Ltd.

Call chime/buzzer/bell EZ-CALL (wired LAN type)
Real System Co., Ltd.

Real System Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

20.4hours

Relatively Fast Response


About This Product

Just press the EZ-CALL call button and you will be notified by the LED display and buzzer of the other device connected via wired LAN or wireless LAN.

■The LED section of the LED indicator light has been updated.

・Emits brighter light with a more even light emitting area ・LED unit is easy to remove/recombine ・Size is equivalent to 40φ ・360° omnidirectional resonance with cylindrical non-porous buzzer ・4 types of ring tones (beep/beep/pipopipo/hunn, DIP switch inside the sound unit) ・Two-step ringer volume adjustment (louder/lower, DIP switch inside the sound unit) ・Each ringtone can be set to intermittent/continuous/silent. ・Others include R, Y, G, B clear glove type, 7 color display in one unit (red, green, blue, yellow, light blue, purple, white), etc. *Please contact us for details.

■Call and stop

・EZ-CALL connects two main units (button type or LED indicator type) via wired LAN or wireless LAN, and when you press the call button on the main unit, you will be notified by the LED indicator light and buzzer sound of the pre-registered partner device. , is a calling buzzer. - The LED display color is 1 to 5 steps (red, yellow, green, blue, clear), allowing you to distinguish which call button is pressed. (setting) -Press the stop button on the main unit to stop the call LED display and sound. It is also possible to automatically stop it after a certain period of time. (setting) - The call button can be set to three modes: "call", "stop", and "combined call/stop". ・4 types of ring tones (beep/beep/beep/beep), intermittent or continuous tone, volume adjustment in 2 levels (DIP switch inside the sound unit) ・Can be connected to multiple main units.

■Connection method

EZ-CALL allows three types of connection methods. ・Wired LAN…Connect to the HUB with a LAN cable or directly with a cross LAN cable ・Wireless LAN…Infrastructure mode that communicates via an access point (AP) (for internal LAN) ・Wireless LAN…Ad hoc mode for direct communication between EZ-CALL (small local LAN)

■Call button

The call button can be set to three modes. ・Call → Press the button to call ・Stop → Press the button to stop ・Call/Stop function → Press the button to call, press again to stop *This product is made to order.

  • Product

    Call chime/buzzer/bell EZ-CALL (wired LAN type)

Share this product


340+ people viewing

Last viewed: 7 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

2 Models of Call chime/buzzer/bell EZ-CALL (wired LAN type)

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Power supply Mass Indicator light Power consumption Body size (mm) Ringtone Operating temperature Network protocol Network interface Type Accessories
Call chime/buzzer/bell EZ-CALL (wired LAN type)-Part Number-EZ-CALL-20

EZ-CALL-20

Available upon quote

AC adapter, 5V/2A or more

80g

None

Approximately 1.5W

50 (W) x 70 (D) x 30 (H)

None

0℃~50℃, non-condensing

UDP (with communication confirmation) or TCP/IP

RJ45 connector: 10Base-T/100Base-TX auto detection
Ethernet: IEEE 802.3

Button type

AC adapter (5V2A), setting software (CD-ROM), instruction manual with warranty

Call chime/buzzer/bell EZ-CALL (wired LAN type)-Part Number-EZ-CALL-2x

EZ-CALL-2x

Available upon quote

AC adapter, 5V/2A or more

320g

Red, yellow, green, blue, clear (up to 5 levels)
Please specify the number of stages.

Approx. 1.5W, approx. 5W (when LED flashes and sounds)

Standard type: 80 (W) x125 (D) x32 (H), LED indicator light: 40Φ228 (3 stages)
Vertical type: 75 (W) x100 (D) x50 (H), LED indicator light: 40Φ228 (3 stages)

Intermittent or continuous beep/beep/beep/beep sound
Two levels of volume adjustment
Sound unit internal DIP switch switching

0℃~50℃, non-condensing

UDP (with communication confirmation) or TCP/IP

RJ45 connector: 10Base-T/100Base-TX auto detection
Ethernet: IEEE 802.3

LDE indicator light type x is the number of LED stages

AC adapter (5V2A), setting software (CD-ROM), instruction manual with warranty

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Led Light Sources Products

Other products of Real System Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Real System Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

20.4hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree