High performance fiber laser processing machine HL2512GS (Gloria Co., Ltd.)
High performance fiber laser processing machine HL2512GS
Gloria Co., Ltd.
This product is registered by Gloria Co., Ltd..
About This Product
■Features
・Specially designed for 4’ x 8’ materials, realizing a sliding fully open cover
- Designed to make it easier to remove products that are difficult to remove from the back.
・Z-axis stroke is wide 200mm. Can also be used for cutting after bending
・Simple drawing function and nesting function are also available, making it easy to set up processing.
- By integrating the oscillator with the machine, the installation area has been kept as small as possible.
■Sliding full open cover
The HL2512GS, designed specifically for 4'x8', is a fully open cover type machine that meets many requests. Since it is a one-table standalone machine and does not include a shuttle table, the installation area is kept to the minimum necessary. Furthermore, it is possible to easily set materials measuring 1,219mm x 2,438mm directly into the machine.
■Back side maintenance door
A door is installed on the back side, making it easy to access products that are difficult to access at the back.
■Z-axis stroke 200mm
The Z-axis stroke is wide at 200mm, and the machining range is greatly expanded from the conventional 100mm. We can also handle any additional cutting required after bending.
■Does not take up space
The oscillator is mounted at the rear of the machine body. By integrating with the machine, the installation area is minimized and effective factory space is secured.
User-friendly standard functions
■Freebear standard equipment
Positioning of materials is easy with the air-lifting freebearer. It is also possible to reduce material damage.
■Operation software ALPHA T
Equipped with the latest in-house software ALPHA T. It also has a simple drawing function and a nesting function, making the setup for processing easy.
■Energy saving
Equipped with an IPG fiber laser oscillator. Electricity costs can be significantly reduced compared to CO₂ lasers.
■One lens operation
The inside of the head is sealed and water-cooled, and due to all materials, plate thicknesses, and gas types, there is no need to replace the lens, and the customer does not need to clean the lens.
■Trailing sensor standard equipment
Instantly identify irregularities in materials. The distance between the nozzle and the material surface is always kept constant to perform stable processing.
■NC gas pressure control standard equipment
The assist gas type and pressure, which vary depending on the material and plate thickness, can be instantly changed to the appropriate gas type and pressure according to the processing conditions.
This is the version of our website addressed to speakers of English in
the United States.
If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.