Mist/spray oil applicator PS-255
Sugiyama Electric System Co., Ltd.

Sugiyama Electric System Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

26.5hours

Relatively Fast Response

About This Product

■Product overviewPS-255 is a lubricating device for metal working presses that uses an electromagnetic pump and spray nozzle. The electromagnetic pump installed in each spray nozzle can be digitally controlled to finely adjust the amount of oil applied to each nozzle. The spray nozzle uses compressed air to atomize processing oil at low pressure and spray it uniformly onto the workpiece. The PS-255 series, which combines a controller, tank, nozzle, etc., can meet a wide range of requirements for oils with low kinematic viscosity (10 mm2/s or less).

Features
■Can be used with up to 12 nozzles *16 nozzles (optional)6 nozzles for the upper side of the material and 6 nozzles for the lower side of the material, allowing coating using up to 12 nozzles.

■Large capacity/multiple oil tanksThe PS-255 uses 10L and 20L tanks with a lower limit float switch, and there are models equipped with one 20L tank, two 20L tanks, and three 10L tanks. Multiple oil tanks allow you to switch between different types of oil.

■Multiple registration of spray settingsUp to 100 sets of spray settings can be registered in the bank. 64 sets can be specified from external input.

■Connection of monitoring sensorUp to 4 KEYENCE flow sensors (FD-SS02A) can be connected.
*Maximum of 16 units available as an option

■About spray oil amount adjustmentThe electromagnetic pump installed in PS-255 is driven by DC24V voltage pulses. The amount of oil fed is controlled by the voltage pulse width (pulse ON time) (ms) and pulse frequency (Hz). The pulse width is related to the stroke amount of the plunger in the electromagnetic pump, and the longer the pulse width, the greater the stroke amount.

Pulse frequency is the number of strokes of the plunger during 1s. The higher the pulse frequency, the higher the number of strokes. The longer the pulse width and the higher the pulse frequency, the more oil will be sent, but the tendency will vary depending on the kinematic viscosity of the oil and piping conditions. Additionally, if the pulse width and frequency are set so that the plunger does not reciprocate normally, the amount of oil delivered will become unstable. Pulse width is set for each pump. Set two pulse frequencies: one for UPPER (CH1, 3, 5, 7, 9, 11) and one for LOWER (CH2, 4, 6, 8, 10, 12).

Model
There are 1 models for this product.

Product
Mist/spray oil applicator PS-255

Handling Company
Sugiyama Electric System Co., Ltd.

Categories

Machining / Machine Tools

Coating Process Equipment

FA Equipment

Spray Coating Equipment

80+ people viewing

Last viewed: 9 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Mist/spray oil applicator PS-255

Image	Part Number	Price (excluding tax)	Power supply	Mass	Flow rate counting	Number of waste liquid tanks	Spray area	Number of atomizing air regulators	Input circuit	Input	Usable oil	Relay output	Filter regulator	Bank selection	Number of nozzles and pumps	Number of oil tanks	Air consumption
	PS-255	Available upon quote	Voltage AC100V - AC220V Frequency 50/60Hz Power consumption 200VA maximum Current consumption 2A@100V/1A@200V	TBD	1, 2, 3, 4, none *16 units MAX (optional)	1 or none	3 areas	2	+24V internal power supply type	Spray command, forced spray air command, operation prohibited, bank selection, spray area	Metal processing oil, viscosity 10cSt@40℃ or less However, it does not attack metals or resins. Non-flammable and non-water soluble.	Rating DC30V3A AC220V3A Number of outputs: 4 outputs (stop output, continuous prohibition, alarm output, call output)	Supply pressure 0.4 - 1MPa Setting pressure 0.4 - 0.5MPa	64 types	Max 12 *Up to 16 nozzles as an option	1 tank type 20L×1 2 tank type 20L×2 3 tank type 10L x 3	30L/min max per nozzle

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Spray type flux applicator VD-7000

Osaka Asahi Chemical Co., Ltd.

80+ people viewing

Last viewed: 1 hour ago

Response time: 0.83 hours

Coating Process Equipment

3 models listed

Flange applicator X-1

Tokki Co., Ltd.

100+ people viewing

Last viewed: 32 minutes ago

Response time: 0.61 hours

Coating Process Equipment

3 models listed

1-component Super Shot Wetted part resin micro-application valve Diaphragm valve SDV-100

Nippon Sossee Kogyo Co., Ltd.

90+ people viewing

Last viewed: 44 minutes ago

Response time: 24.82 hours

Coating Process Equipment

3 models listed

Two-component material transfer solution Z Pump

Graco Inc.

4.5

290+ people viewing

Last viewed: 32 minutes ago

Response time: 14.60 hours

Coating Process Equipment

10 models listed

Custom solder printing machine (general purpose machine) TSP-770

Tenryu Seiki Co., Ltd.

100+ people viewing

Last viewed: 32 minutes ago

Response time: 27.29 hours

Coating Process Equipment

3 models listed

Point spray fluxer F-500T

Osaka Asahi Chemical Co., Ltd.

90+ people viewing

Last viewed: 1 hour ago

Response time: 0.83 hours

Coating Process Equipment

3 models listed

Flange applicator X-2

Tokki Co., Ltd.

110+ people viewing

Last viewed: 32 minutes ago

Response time: 0.61 hours

Coating Process Equipment

3 models listed

1-liquid Super Shot Ultra-small amount dispensing dispenser equipped with an ultra-precision pump unit 1-liquid automatic metering and fixed-quantity dispensing machine SSP series

Nippon Sossee Kogyo Co., Ltd.

70+ people viewing

Last viewed: 1 hour ago

Response time: 24.82 hours

Coating Process Equipment

3 models listed

Precision dispensing controller DC600 series

Yagyu Shokai Co., Ltd.

$780.00

90+ people viewing

Last viewed: 3 hours ago

Response time: 2.85 hours

Coating Process Equipment

3 models listed

Barcoder with automatic copying function

UK Tech Co., Ltd.

100+ people viewing

Last viewed: 32 minutes ago

Response time: 0.32 hours

Coating Process Equipment

2 models listed

Spray type flux applicator F-400T

Osaka Asahi Chemical Co., Ltd.

90+ people viewing

Last viewed: 1 hour ago

Response time: 0.83 hours

Coating Process Equipment

3 models listed

Flange applicator X-3

Tokki Co., Ltd.

140+ people viewing

Last viewed: 32 minutes ago

Response time: 0.61 hours

Coating Process Equipment

3 models listed

See More Coating Process Equipment Products

Other products of Sugiyama Electric System Co., Ltd.

Reviews shown here are reviews of companies.

High precision scrap detector PS-482/484/488

Sugiyama Electric System Co., Ltd.

100+ people viewing

Response time: 26.46 hours

Scrap lifting detector PS-474

Sugiyama Electric System Co., Ltd.

50+ people viewing

Response time: 26.46 hours

Die height detector PS-464/462

Sugiyama Electric System Co., Ltd.

90+ people viewing

Last viewed: 11 minutes ago

Response time: 26.46 hours

Sensor head PS-4013

Sugiyama Electric System Co., Ltd.

80+ people viewing

Last viewed: 18 hours ago

Response time: 26.46 hours

Proximity Sensors

Sensor head PS-4014

Sugiyama Electric System Co., Ltd.

80+ people viewing

Last viewed: 12 hours ago

Response time: 26.46 hours

Proximity Sensors

Sensor head PS-4018

Sugiyama Electric System Co., Ltd.

60+ people viewing

Last viewed: 20 hours ago

Response time: 26.46 hours

Proximity Sensors

Sensor head PS-4020

Sugiyama Electric System Co., Ltd.

100+ people viewing

Last viewed: 1 minute ago

Response time: 26.46 hours

Proximity Sensors

Sensor head PS-4024

Sugiyama Electric System Co., Ltd.

60+ people viewing

Last viewed: 16 hours ago

Response time: 26.46 hours

Proximity Sensors

Sensor head PS-4025

Sugiyama Electric System Co., Ltd.

90+ people viewing

Last viewed: 12 minutes ago

Response time: 26.46 hours

Proximity Sensors

Sensor head PS-4026

Sugiyama Electric System Co., Ltd.

70+ people viewing

Last viewed: 20 hours ago

Response time: 26.46 hours

Proximity Sensors

Sensor head PS-4032

Sugiyama Electric System Co., Ltd.

70+ people viewing

Last viewed: 23 hours ago

Response time: 26.46 hours

Proximity Sensors

Spring sensor US-2

Sugiyama Electric System Co., Ltd.

80+ people viewing

Last viewed: 9 minutes ago

Response time: 26.46 hours

Contact Sensors

View more products of Sugiyama Electric System Co., Ltd.

About Company Handling This Product

Sugiyama Electric System Co., Ltd.

Response Rate

100.0%

Response Time

26.5hrs

Japan

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Mist/spray oil applicator PS-255 Sugiyama Electric System Co., Ltd.

Sugiyama Electric System Co., Ltd.'s Response Status

About This Product

■Product overview

■Can be used with up to 12 nozzles *16 nozzles (optional)

■Large capacity/multiple oil tanks

■Multiple registration of spray settings

■Connection of monitoring sensor

■About spray oil amount adjustment

1 Models of Mist/spray oil applicator PS-255

PS-255

Customers who viewed this product also viewed

Other products of Sugiyama Electric System Co., Ltd.

About Company Handling This Product

Related search keywords

Mist/spray oil applicator PS-255
Sugiyama Electric System Co., Ltd.