Compression moldability measurement and evaluation device Nutabflex
Okada Seiko Co., Ltd.
About This Product
Since the first model was launched in 2004, the compression moldability measuring device "Tabflex" has been well received for collecting data during the tableting process. To mark the 10th anniversary, the price has been reduced and the product has been reborn as "Newtab Flex" with a new look.
The operating condition settings that are the appeal of this machine {pressure control/tableting operation (preload/continuous tableting), powder filling operation (suction/vibration), data collection ability (up to 7 channels of weight, including punch load)} In addition, it simplifies the installation of punches and mortars, supports multi-layer locks, and allows for even more flexible collection of formability data.
Data logging supports connection to the recording software "Daatsu III".
■Flexible support for formulation design. A production mortar can be used and installation is possible in 5 minutes.
・Tableting conditions can be easily set with highly reproducible position and load control.
・The suction operation of the lower punch and the vibration operation of the feeder reduce filling unevenness.
-Equipped with independent servo motors for the upper and lower punches, allowing for load/displacement maintenance and discharge.
- Up to 7 sensor channels (mill wall surface pressure, scraper load, uplift pressure, etc.).
-The touch panel is removable and can be operated at hand.
- Compatible with multi-layer locks (pulse motor used for feeder operation).
- The preload mechanism of production machines can be reproduced.
-
Product
Compression moldability measurement and evaluation device Nutabflex
-
Handling Company
Okada Seiko Co., Ltd.
-
Categories
1 Models of Compression moldability measurement and evaluation device Nutabflex
| Product Image | Part Number | Price (excluding tax) | Device type | Equipment weight | External dimensions Installation dimensions | External dimensions Main body | Feeder section drive source | Feeder section method | Feeder section vibration function | Lower punch drive section movement speed | Lower punch drive section stroke | Lower punch drive unit Pestle used | Lower punch drive unit drive source | Lower punch drive unit forming control | Lower punch drive unit load conversion | Lower punch drive unit load detection | Lower punch drive unit position detection | Lower punch drive unit rated thrust | Mortar filling depth | Mortar part Mortar used | Safety equipment | Upper punch drive section stroke | Upper punch drive unit Pestle used | Upper punch drive unit drive source | Upper punch drive unit forming control | Upper punch drive unit load conversion | Upper punch drive unit load detection | Upper punch drive unit load setting | Upper punch drive unit moving speed | Upper punch drive unit position detection | Upper punch drive unit rated thrust | Utility |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
New tab flex |
Available upon quote | Digital setting lower pressure type single compression molding machine | 1,200 (kg) | Width 1,500 (mm) × Depth 1,400 (mm) × Height 2,000 (mm) | Width 750 (mm) x Depth 900 (mm) x Height 1,840 (mm) | Step motor pole screw drive | Electric actuator | Simple vibration by reciprocating feeder motion |
Traveling speed: 0.01~100 (mm/s) Molding speed: 0.01~20.00 (mm/s) |
80 (mm) Resolution 0.01 (mm) |
Punch for rotary machine (TMS B-TYPE) Tabflex standard pestle (as option) N-30 pestle (as option) |
AC servo motor driven electric cylinder | Load control/position control parameter setting |
High speed digital indicator Conversion speed 2,000 (times/s) Feedback the converted value to the servo controller |
Compression type load cell Rated capacity 20 (kN) Lower punch load Compression type load cell Rated capacity 2 (kN) Push-up load |
Optical encoder with built-in AC servo motor | 20 (kN) | 20 (mm) |
Mortar for rotary machine (TMS B-TYPE) Tabflex standard mill (as option) Mortar for N-30 (as option) |
Startup restriction by cover interlock switch Abnormal pressure detection, operator call in case of abnormality (screen + buzzer) |
80 (mm) Resolution 0.01 (mm) |
Punch for rotary machine (TMS B-TYPE) Tabflex standard pestle (as option) N-30 pestle (as option) |
AC servo motor driven electric cylinder | Load control/position control parameter setting |
High speed digital indicator Conversion speed 2,000 (times/s) Feedback the converted value to the servo controller |
Compression type load cell Rated capacity 20 (kN) Upper punch load | 0.01~20.00 (kN) Parameter setting |
Traveling speed: 0.01~100.00 (mm/s) Parameter setting Molding speed: 0.01~20.00 (mm/s) Parameter settings |
Optical encoder with built-in AC servo motor | 20 (kN) | Power supply: 3Φ AC200V 30 (A) |
Customers who viewed this product also viewed
Other products of Okada Seiko Co., Ltd.
View more products of Okada Seiko Co., Ltd.
About Company Handling This Product
- Japan