Specified low power transceiver DR-PM300SE
System Information Planning Co., Ltd.
About This Product
■Supports all call modes
Adopts all 47 channels of special small radio, simultaneous calls between 2, 3, and 4 parties, and all call modes supported by ALINCO's special small transceiver, including alternate, relay, and connected relay.
■All-in-one package
All-in-one package including radio section including antenna, operation section, microphone, DC cable, and mobile bracket.
■Waterproof specification
The antenna, wireless unit, and connection cable are IP65/66/67 dust-resistant, jet-proof, and immersion-proof, so they can be permanently installed outdoors. (The control panel and microphone are not waterproof.)
■Can be installed on large vehicles
The power supply is automatically compatible with DC12V and 24V, and can be installed directly on large vehicles.
■Easy to install
The included stand microphone and wireless section with antenna both use magnetic bases, making installation easy without special tools.
■Both speakers and earphones can be used
The optional wireless microphone that enables the built-in noise cancellation function can be used with both speakers and earphones. (Speaker microphone EMS-87B is only for alternate calls. Howling will occur during simultaneous calls, so it cannot be used.)
■You can choose the liquid crystal display
The LCD display can be selected from 7 colors.
■Estimated communication distance
Flat areas without obstacles such as riverbeds: Alternate calls 1km or more / Simultaneous calls about 800m
Places with many obstacles such as urban areas: Approximately 800m / 600m
Inside the building: This varies greatly depending on the structure, building materials, presence of installed features, etc.
*Measurement conditions: The wireless unit is installed on the roof of a passenger car, and communication is carried out between this device, which is powered by a 12V battery, and the DJ-P300, which is worn on the waist.
*10mW for alternate calls, 1mW for 2 to 3 parties/continuous for simultaneous calls (10mW makes little difference for simultaneous calls.)
■Standard configuration
・Body
・Magnetic bracket for mounting the wireless unit
・Stand microphone
・Connection cable between operation unit and wireless unit 5m
・DC cable (approx. 3m)
・Mobile bracket for operation unit (metal fittings only)
・Mounting screw set
・Microphone windshield for EMS-924
-
Product
Specified low power transceiver DR-PM300SE
-
Handling Company
System Information Planning Co., Ltd.
-
Categories
1 Models of Specified low power transceiver DR-PM300SE
| Product Image | Part Number | Price (excluding tax) | Communication method | Current consumption | External power terminal | Frequency range | License application | Low frequency output | Number of channels | Operating temperature range | Radio wave model | Rated voltage | Receiving sensitivity | Size | Transmission power | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
DR-PM300SE |
Available upon quote | Simplex, semi-duplex, duplex |
When transmitting: Approx. 75mA (10mW), Approx. 65mA (1mW) At receiving rated output: approximately 160mA Battery save time: Approx. 28mA |
DC 5V ~ 6V EIAJ Category 2 (+pole center pin side) | 421/422/440MHz band specified low power radio | Unnecessary | 10% distortion) Main unit 400mW, earphone terminal 80mW or more | Simplex 20, duplex (semi-duplex) 27ch, total 47ch | -10℃~+50℃ (However, charging is 0℃~+45℃) | F3E (FM), F1D (FSK) | Built-in lithium-ion battery DC3.6V/2,200mAh | -14dBu or less (12dB SINAD) |
Radio part 59.8×411.0×34.0mm Operation unit 140.0×40.0×178.0mm Microphone section total height: approx. 533mm Approximately 495mm from the stand surface to the tip of the microphone (excluding windshield) |
10mW, 1mW | 2,600g (excluding FM0078A mobile bracket and UA0038Y DC cable) |
Customers who viewed this product also viewed
Other products of System Information Planning Co., Ltd.
View more products of System Information Planning Co., Ltd.