All Categories

History

  1. Metoree
  2. Adhesives & Repair Materials
  3. Paint Primers
  4. 2-component polyester primer Panaco PA for aromatic nylon materials (Musashi Paint Co., Ltd.)

2-component polyester primer Panaco PA for aromatic nylon materials
Musashi Paint Co., Ltd.

About This Product

■Summary

Nylon (polyamide) material has been widely used in the housings of mobile phones, notebook computers, etc. in recent years due to its excellent strength and rigidity. Among them, aromatic nylon materials have excellent flame retardancy, low water absorption, crystallinity, and solvent resistance, and various grades have been developed such as carbon fiber reinforced, glass fiber reinforced, and filler reinforced composite types. It is expected that it will become the mainstream of engineering plastics in the future. Panaco PA was developed as a primer for this purpose and is widely applicable to aromatic nylon materials.

■Features

・Excellent concealability ・Excellent adhesion to various grades of materials ・Excellent interlayer adhesion with top coat paint (Hiurex P series) ・Strong coating performance ・Excellent design Recommended thinners and hardeners

■Thinner

・Z-L163 Panaco PA thinner (quick drying type) ・Z-L165 Panaco PA thinner (standard type) ・Z-L167 Panaco PA thinner (slow drying type)

■Hardening agent

Z-H-430 (Standard)

■Applicable materials

・Aromatic nylon material (RENY manufactured by Mitsubishi Engineering Plastics, etc.) ・SPCC-SB polished steel plate ・SPCC-SB Zinc phosphate treated steel sheet ・Aluminum (A1050P) ・Aluminum alloy (A5052P) ・Stainless steel (SUS-304) ・Galvanized iron plate

■Precautions for use

- If foreign substances such as mold release agents adhere to the material, it may cause poor adhesion or repellency, so please wash it before painting. ・Panaco PA may have problems with solubility if used with a thinner other than the exclusive one, so please use the exclusive thinner when diluting the paint and cleaning the paint sprayer. - Various grades of materials are available, and their properties may differ from the original, so please check before using. ・Be sure to stir evenly before use. When painting, put the diluted paint in a stirring tank and paint while stirring. - Avoid direct sunlight and store paint in a cool, dark place (-20 to 40℃). ・Since it is a two-component paint, please make only the amount you need. Pot life is 4 hours at 20℃. Please note that if it exceeds its pot life, it may not be able to achieve its original performance.

  • Product

    2-component polyester primer Panaco PA for aromatic nylon materials

Share this product


100+ people viewing

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

2 Models of 2-component polyester primer Panaco PA for aromatic nylon materials

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Pencil hardness Mixing ratio Paint: Hardener: Thinner (weight ratio) Migration resistance Heat resistance Moisture resistance Abrasion resistant eraser Wear resistant jeans Low temperature resistance Heat cycle resistance Alcohol resistance Standard film thickness Adhesion Paint viscosity (Iwata simple viscometer NK-2,20℃) Painting method Spray pressure Painting method Gun caliber Drying conditions Drying temperature x time Drying conditions Setting temperature x time Spray gun and object distance

N89400

Available upon quote

Pencil scratch tester, Mitsubishi Uni, load 1kg, scratch method [2H]

10:1:8±1

Foamed polyethylene, load 80g/cm2, 60℃, 48 hours, no appearance abnormality [Passed]

Adhesion test after being left at 85℃ for 96 hours [100/100]

40℃×98%RH×Adhesion test after 48 hours [100/100]

Sony eraser tester, load 1.64kgf, 300 times, no substrate exposure [Passed]

Rubbing test, load 500g/cm2, 2000 reciprocations, no substrate exposure [Passed]

Adhesion test after being left at -40℃ for 96 hours [100/100]

-20℃×3 hours ⇔ 60℃×3 hours, adhesion test after 10 cycles [100/100]

99.5% ethanol rubbing, load 500g/cm2,500 times, no exposed substrate [Passed]

10±2μm

1mm square grid Cellotape peeling test (10×10) [100/100]

10±2 seconds

0.3±0.1MPa

1.3±0.3mmφ

80℃×30 minutes

25℃×5 minutes

25±5cm

N894

Available upon quote

Pencil scratch tester, Mitsubishi Uni, load 1kg, scratch method [2H]

10:1:8±1

Foamed polyethylene, load 80g/cm2, 60℃, 48 hours, no appearance abnormality [Passed]

Adhesion test after being left at 85℃ for 96 hours [100/100]

40℃×98%RH×Adhesion test after 48 hours [100/100]

Sony eraser tester, load 1.64kgf, 300 times, no substrate exposure [Passed]

Rubbing test, load 500g/cm2, 2000 reciprocations, no substrate exposure [Passed]

Adhesion test after being left at -40℃ for 96 hours [100/100]

-20℃×3 hours ⇔ 60℃×3 hours, adhesion test after 10 cycles [100/100]

99.5% ethanol rubbing, load 500g/cm2,500 times, no exposed substrate [Passed]

10±2μm

1mm square grid Cellotape peeling test (10×10) [100/100]

10±2 seconds

0.3±0.1MPa

1.3±0.3mmφ

80℃×30 minutes

25℃×5 minutes

25±5cm

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Primer Industrial adhesive tape, chemical shoe primer-Toyo Chemical Co., Ltd.

Primer Industrial adhesive tape, chemical shoe primer

Toyo Chemical Co., Ltd.

250+ people viewing

Last viewed: 6 hours ago

Response time: 21.36 hours

Paint Primers

2 models listed

Rust punch-San-S Engineering Co., Ltd.

Rust punch

San-S Engineering Co., Ltd.

80+ people viewing

Last viewed: 3 hours ago

Response time: 1.49 hours

Paint Primers

2 models listed

Metalloid-Iox Co., Ltd.

Metalloid

Iox Co., Ltd.

260+ people viewing

Last viewed: 50 minutes ago

Paint Primers

16 models listed

Anti-corrosion primer room temperature curing type-Kobe Mitaka Co., Ltd.

Anti-corrosion primer room temperature curing type

Kobe Mitaka Co., Ltd.

50+ people viewing

Last viewed: 1 hour ago

Paint Primers

2 models listed

Zinc spray epoxy primer-Kimura Shoji Co., Ltd.

Zinc spray epoxy primer

Kimura Shoji Co., Ltd.

240+ people viewing

Last viewed: 2 hours ago

Paint Primers

2 models listed

TOMAX Functional Primer-Nippon Kako Paint Co., Ltd.

TOMAX Functional Primer

Nippon Kako Paint Co., Ltd.

200+ people viewing

Last viewed: 1 hour ago

Response time: 27.69 hours

Paint Primers

4 models listed

Spray type anti-rust primer CCP spray can-Kobe Mitaka Co., Ltd.

Spray type anti-rust primer CCP spray can

Kobe Mitaka Co., Ltd.

30+ people viewing

Paint Primers

3 models listed

TOMAX Primer for transparent conductive film-Nippon Kako Paint Co., Ltd.

TOMAX Primer for transparent conductive film

Nippon Kako Paint Co., Ltd.

170+ people viewing

Last viewed: 1 hour ago

Response time: 27.69 hours

Paint Primers

6 models listed

Metal Clean α-L-San-S Engineering Co., Ltd.

Metal Clean α-L

San-S Engineering Co., Ltd.

60+ people viewing

Last viewed: 4 hours ago

Response time: 1.49 hours

Paint Primers
Adhesive primer for Polycalm Original primer for PP-Pluscoat Co., Ltd.

Adhesive primer for Polycalm Original primer for PP

Pluscoat Co., Ltd.

160+ people viewing

Last viewed: 1 hour ago

Paint Primers

2 models listed

OS Primer UF OS41-UF 16L-

OS Primer UF OS41-UF 16L

10+ people viewing

Paint Primers
Cleaning products C-300-San-S Engineering Co., Ltd.

Cleaning products C-300

San-S Engineering Co., Ltd.

50+ people viewing

Last viewed: 48 minutes ago

Response time: 1.49 hours

Paint Primers
See More Paint Primers Products

About Company Handling This Product

Musashi Paint Co., Ltd.

  • Japan

Related search keywords

Paint Primers
Paint Primers　Musashi Paint Co., Ltd.
Musashi Paint Co., Ltd.

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree