Ultraviolet curing paint Ultravine UV75
Musashi Paint Co., Ltd.

About This Product

■Summary
In the plastics industry, various coatings are applied to provide aesthetics, surface protection, chemical resistance, and stain resistance. In recent years, rapid advances in information and communication equipment have led to the development of mobile products, including mobile phones.

For this reason, plastic is attracting attention as an alternative to metal and glass as products become lighter and more compact.However, mobile devices that are usually carried around require physical properties such as abrasion resistance and chemical resistance, and conventional plastics The acrylic lacquers and acrylic urethane paints that have been used as paints have limitations in their performance.

The newly developed Ultravine UV75-Line was developed as a protective coating for mobile phones, and is a paint with superior flexibility and heat resistance compared to the UV72-Line.

■Features
・Very fast curing speed
・Low temperature curing
・Excellent workability
・Excellent flexibility and heat resistance

Recommended thinner
■UV75-
・Z-27095 Ultravine Thinner (quick drying, standard type)
・Z-27098 Ultra Vine Thinner (slow drying type)

■UV75-MJ
・Z-27041 Ultra Vine Thinner (quick drying type)
・Z-27071 Ultra Vine Thinner (Standard type)
・Z-27045 Ultra Vine Thinner (slow drying type)

Applicable materials and undercoats
■UV75-
・ABS
・PC
・PC/ABS
・736-Line (1-component acrylic lacquer paint)
・P79-, NP79-, KNP79-, UNP79-, GP79- line (2-component acrylic urethane paint)

■UV75-MJ
・ABS
・PC
・PC/ABS
・PMMA
・Aluminum (A1050P, A5052P)
・Metals such as SUS-304

■Precautions for use
- If foreign substances such as mold release agents adhere to the material, it may cause poor adhesion or repellency, so please wash it before painting.
・Depending on the type of solvent, thinner may cause a decline in physical properties, so be sure to use a dedicated thinner.
- Various grades of materials are available, and their properties may differ from the original, so please check before using.
・Be sure to stir evenly before use. When painting, put the diluted paint in a stirring tank and paint while stirring.

Model
There are 4 models for this product.

Product
Ultraviolet curing paint Ultravine UV75

Handling Company
Musashi Paint Co., Ltd.

Categories

Polymeric Materials

UV/EB Cured Resins

Building Materials

Coated Materials

100+ people viewing

Free
Since our quotes are free, feel free to use our service.

No Phone Number Required
You won’t have to worry about receiving unnecessary calls.

4 Models of Ultraviolet curing paint Ultravine UV75

Items marked with have different values depending on the model number.

Click on the part number for more information about each product

Part Number	Price (excluding tax)	Abrasion resistant eraser	Adhesion	Alcohol resistance	Curing conditions Cumulative light intensity	Curing conditions Lamp output	Curing conditions Lamp type	Curing conditions Peak illuminance	Curing conditions Pre-drying temperature x time	Heat cycle resistance	Heat resistance	Low temperature resistance	Migration resistance	Mixing ratio Paint: Thinner (weight ratio)	Moisture resistance	Paint viscosity (Iwata simple viscometer NK-2,20℃)	Painting method Gun caliber	Painting method Spray pressure	Pencil hardness	Spray gun and object distance	Standard film thickness	Wear resistant jeans
UV750	Available upon quote	Sony eraser tester, load 1.64kgf, 300 times, no substrate exposure [Passed]	1mm square grid Cellotape peeling test (10×10) [100/100]	99.5% ethanol rubbing, load 500g/cm2,500 times, no exposed substrate [Passed]	800±100mj/cm2 *Measured using EYE UV METER UVPF-A1 (light receiving section PD-365 manufactured by EYE GRAPHICS Co., Ltd.)	100±20W/cm	High pressure mercury lamp	100±20mW/cm2 *Measured using EYE UV METER UVPF-A1 (light receiving section PD-365 manufactured by EYE GRAPHICS Co., Ltd.)	60℃×5 minutes	-20℃×3 hours ⇔ 60℃×3 hours, adhesion test after 10 cycles [100/100]	Adhesion test after being left at 85℃ for 96 hours [100/100]	Adhesion test after being left at -40℃ for 96 hours [100/100]	Foamed polyethylene, load 80g/cm2, 60℃, 48 hours, no appearance abnormality [Passed]	100:100±10	40℃×98%RH×Adhesion test after 48 hours [100/100]	8.5±0.5 seconds	1.3±0.3mmφ	0.3±0.1MPa	Pencil scratch tester, Mitsubishi Uni, load 1kg, scratch method [H~2H]	25±5cm	10±2μm	Rubbing test, load 500g/cm2, 2000 reciprocations, no substrate exposure [Passed]
UV7500	Available upon quote	Sony eraser tester, load 1.64kgf, 300 times, no substrate exposure [Passed]	1mm square grid Cellotape peeling test (10×10) [100/100]	99.5% ethanol rubbing, load 500g/cm2,500 times, no exposed substrate [Passed]	800±100mj/cm2 *Measured using EYE UV METER UVPF-A1 (light receiving section PD-365 manufactured by EYE GRAPHICS Co., Ltd.)	100±20W/cm	High pressure mercury lamp	100±20mW/cm2 *Measured using EYE UV METER UVPF-A1 (light receiving section PD-365 manufactured by EYE GRAPHICS Co., Ltd.)	60℃×5 minutes	-20℃×3 hours ⇔ 60℃×3 hours, adhesion test after 10 cycles [100/100]	Adhesion test after being left at 85℃ for 96 hours [100/100]	Adhesion test after being left at -40℃ for 96 hours [100/100]	Foamed polyethylene, load 80g/cm2, 60℃, 48 hours, no appearance abnormality [Passed]	100:100±10	40℃×98%RH×Adhesion test after 48 hours [100/100]	8.5±0.5 seconds	1.3±0.3mmφ	0.3±0.1MPa	Pencil scratch tester, Mitsubishi Uni, load 1kg, scratch method [H~2H]	25±5cm	10±2μm	Rubbing test, load 500g/cm2, 2000 reciprocations, no substrate exposure [Passed]
UV750MJ	Available upon quote	Sony eraser tester, load 1.64kgf, 300 times, no substrate exposure [Passed]	1mm square grid Cellotape peeling test (10×10) [100/100]	99.5% ethanol rubbing, load 500g/cm2,500 times, no exposed substrate [Passed]	800±100mj/cm2 *Measured using EYE UV METER UVPF-A1 (light receiving section PD-365 manufactured by EYE GRAPHICS Co., Ltd.)	100±20W/cm	High pressure mercury lamp	100±20mW/cm2 *Measured using EYE UV METER UVPF-A1 (light receiving section PD-365 manufactured by EYE GRAPHICS Co., Ltd.)	60℃×5 minutes	-20℃×3 hours ⇔ 60℃×3 hours, adhesion test after 10 cycles [100/100]	Adhesion test after being left at 85℃ for 96 hours [100/100]	Adhesion test after being left at -40℃ for 96 hours [100/100]	Foamed polyethylene, load 80g/cm2, 60℃, 48 hours, no appearance abnormality [Passed]	100:100±10	40℃×98%RH×Adhesion test after 48 hours [100/100]	8.5±0.5 seconds	1.3±0.3mmφ	0.3±0.1MPa	Pencil scratch tester, Mitsubishi Uni, load 1kg, scratch method [3H]	25±5cm	10±2μm	Rubbing test, load 500g/cm2, 2000 reciprocations, no substrate exposure [Passed]
UV7500MJ	Available upon quote	Sony eraser tester, load 1.64kgf, 300 times, no substrate exposure [Passed]	1mm square grid Cellotape peeling test (10×10) [100/100]	99.5% ethanol rubbing, load 500g/cm2,500 times, no exposed substrate [Passed]	800±100mj/cm2 *Measured using EYE UV METER UVPF-A1 (light receiving section PD-365 manufactured by EYE GRAPHICS Co., Ltd.)	100±20W/cm	High pressure mercury lamp	100±20mW/cm2 *Measured using EYE UV METER UVPF-A1 (light receiving section PD-365 manufactured by EYE GRAPHICS Co., Ltd.)	60℃×5 minutes	-20℃×3 hours ⇔ 60℃×3 hours, adhesion test after 10 cycles [100/100]	Adhesion test after being left at 85℃ for 96 hours [100/100]	Adhesion test after being left at -40℃ for 96 hours [100/100]	Foamed polyethylene, load 80g/cm2, 60℃, 48 hours, no appearance abnormality [Passed]	100:100±10	40℃×98%RH×Adhesion test after 48 hours [100/100]	8.5±0.5 seconds	1.3±0.3mmφ	0.3±0.1MPa	Pencil scratch tester, Mitsubishi Uni, load 1kg, scratch method [3H]	25±5cm	10±2μm	Rubbing test, load 500g/cm2, 2000 reciprocations, no substrate exposure [Passed]

Click on the part number for more information about each product

Customers who viewed this product also viewed

Functional monomer Kohshylmer®

KJ Chemicals Co., Ltd.

80+ people viewing

UV/EB Cured Resins

UV-LED Resin Drops of the Sun Hard

Drapas Co., Ltd.

$7.01

30+ people viewing

Last viewed: 21 hours ago

UV/EB Cured Resins

2 models listed

UV-LED resin star drop soft type 403245

Drapas Co., Ltd.

$10.73

30+ people viewing

Last viewed: 2 hours ago

UV/EB Cured Resins

2 models listed

UV-LED resin star drop gummy type 403246

Drapas Co., Ltd.

$10.73

30+ people viewing

Last viewed: 21 hours ago

UV/EB Cured Resins

2 models listed

Hoshi no Shizuku Trial Set/Starter Set

Drapas Co., Ltd.

$17.88

40+ people viewing

Last viewed: 22 hours ago

UV/EB Cured Resins

3 models listed

Silicone -based strain -constructed UV hardened gel, which has a huge effect on vibration control of extremely small precision equipment

Taica Corporation

370+ people viewing

Last viewed: 5 hours ago

UV/EB Cured Resins

7 models listed

Gel Unisolar that cures with UV rays

Nakajima Koki Co., Ltd.

50+ people viewing

Last viewed: 7 hours ago

UV/EB Cured Resins

2 models listed

Gel UV light that cures with ultraviolet light

Nakajima Koki Co., Ltd.

60+ people viewing

UV/EB Cured Resins

Repair putty/spray LED-UV putty set 17-5120

Gengen Chemical Industry Co., Ltd.

30+ people viewing

UV/EB Cured Resins

3 models listed

Repair putty/spray LED-UV putty tube 50g 17-5125

Gengen Chemical Industry Co., Ltd.

30+ people viewing

UV/EB Cured Resins

3 models listed

Custom Tray Resin

Data Design Co., Ltd.

30+ people viewing

UV/EB Cured Resins

Dental LT Clear Resin V2

Data Design Co., Ltd.

30+ people viewing

UV/EB Cured Resins

About Company Handling This Product

Musashi Paint Co., Ltd.

Japan

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Ultraviolet curing paint Ultravine UV75 Musashi Paint Co., Ltd.

About This Product

4 Models of Ultraviolet curing paint Ultravine UV75

UV750

UV7500

UV750MJ

UV7500MJ

Customers who viewed this product also viewed

About Company Handling This Product

Related search keywords

Ultraviolet curing paint Ultravine UV75
Musashi Paint Co., Ltd.