Ultraviolet curing paint Ultravine UV72
Musashi Paint Co., Ltd.

About This Product

■SummaryIn the plastics industry, various coatings are applied to provide aesthetics, surface protection, chemical resistance, and stain resistance. In recent years, rapid advances in information and communication equipment have led to the development of mobile products, including mobile phones.

For this reason, plastic is attracting attention as an alternative to metal and glass as products become lighter and more compact.However, mobile devices that are usually carried around require physical properties such as abrasion resistance and chemical resistance, and conventional plastics The acrylic lacquers and acrylic urethane paints that have been used as paints have limitations in their performance. This paint meets these requirements for wear resistance and chemical resistance.

■Features・Very fast curing speed
・Low temperature curing
・Elevated density coating film
・Excellent workability

■Recommended thinner・Z-27095 Ultravine Thinner (quick drying, standard type)
・Z-27098 Ultra Vine Thinner (slow drying type)

Applicable materials and undercoats
■UV72-line・ABS
・PC/ABS
・P79-, NP79-, UNP79-, GP79-, KNP79- line (2-component acrylic urethane paint)

■UV72-KF line・ABS
・PC/ABS
・736-Line (1-component acrylic lacquer paint)
・P79-, NP79-, UNP79-, GP79-, KNP79- line (2-component acrylic urethane paint)

■Precautions for use- If foreign substances such as mold release agents adhere to the material, it may cause poor adhesion or repellency, so please wash it before painting.
・Depending on the type of solvent, thinner may cause a decline in physical properties, so be sure to use a dedicated thinner.
- Various grades of materials are available, and their properties may differ from the original, so please check before using.
・Be sure to stir evenly before use. When painting, put the diluted paint in a stirring tank and paint while stirring.
- Avoid direct sunlight and store paint in a cool, dark place (0-40℃).
・Please note that this paint cannot be recoated once it has completely cured.
-This paint contains low-molecular monomers, so there is a concern that it may be irritating to the skin, and depending on your constitution, it may cause a rash. When using it, be sure to wear protective gloves and a mask.

Model
There are 4 models available for this product.

Product
Ultraviolet curing paint Ultravine UV72

Handling Company
Musashi Paint Co., Ltd.

Categories

Polymeric Materials

UV/EB Cured Resins

Building Materials

Coated Materials

230+ people viewing

Last viewed: 10 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

4 Models of Ultraviolet curing paint Ultravine UV72

Click on the part number for more information about each product

Part Number	Price (excluding tax)	Pencil hardness	Mixing ratio Paint: Thinner (weight ratio)	Migration resistance	Heat resistance	Moisture resistance	Abrasion resistant eraser	Wear resistant jeans	Low temperature resistance	Heat cycle resistance	Alcohol resistance	Curing conditions Cumulative light intensity	Curing conditions Pre-drying temperature x time	Curing conditions Lamp type	Curing conditions Lamp output	Curing conditions Peak illuminance	Standard film thickness	Adhesion	Paint viscosity (Iwata simple viscometer NK-2,20℃)	Painting method Spray pressure	Painting method Gun caliber	Spray gun and object distance
UV720	Available upon quote	Pencil scratch tester, Mitsubishi Uni, load 1kg, scratch method [2H~3H]	100:110±10	Foamed polyethylene, load 80g/cm2, 60℃, 48 hours, no appearance abnormality [Passed]	Adhesion test after being left at 85℃ for 96 hours [100/100]	40℃×98%RH×Adhesion test after 48 hours [100/100]	Sony eraser tester, load 1.64kgf, 300 times, no substrate exposure [Passed]	Rubbing test, load 500g/cm2, 2000 reciprocations, no substrate exposure [Passed]	Adhesion test after being left at -40℃ for 96 hours [100/100]	-20℃×3 hours ⇔ 60℃×3 hours, adhesion test after 10 cycles [100/100]	99.5% ethanol rubbing, load 500g/cm2,500 times, no exposed substrate [Passed]	800±100mj/cm2 *Measured using EYE UV METER UVPF-A1 (light receiving section PD-365 manufactured by EYE GRAPHICS Co., Ltd.)	60℃×5 minutes	High pressure mercury lamp	100±20W/cm	100±20mW/cm2 *Measured using EYE UV METER UVPF-A1 (light receiving section PD-365 manufactured by EYE GRAPHICS Co., Ltd.)	10±2μm	1mm square grid Cellotape peeling test (10×10) [100/100]	8.5±0.5 seconds	0.3±0.1MPa	1.3±0.3mmφ	25±5cm
UV7200	Available upon quote	Pencil scratch tester, Mitsubishi Uni, load 1kg, scratch method [2H~3H]	100:110±10	Foamed polyethylene, load 80g/cm2, 60℃, 48 hours, no appearance abnormality [Passed]	Adhesion test after being left at 85℃ for 96 hours [100/100]	40℃×98%RH×Adhesion test after 48 hours [100/100]	Sony eraser tester, load 1.64kgf, 300 times, no substrate exposure [Passed]	Rubbing test, load 500g/cm2, 2000 reciprocations, no substrate exposure [Passed]	Adhesion test after being left at -40℃ for 96 hours [100/100]	-20℃×3 hours ⇔ 60℃×3 hours, adhesion test after 10 cycles [100/100]	99.5% ethanol rubbing, load 500g/cm2,500 times, no exposed substrate [Passed]	800±100mj/cm2 *Measured using EYE UV METER UVPF-A1 (light receiving section PD-365 manufactured by EYE GRAPHICS Co., Ltd.)	60℃×5 minutes	High pressure mercury lamp	100±20W/cm	100±20mW/cm2 *Measured using EYE UV METER UVPF-A1 (light receiving section PD-365 manufactured by EYE GRAPHICS Co., Ltd.)	10±2μm	1mm square grid Cellotape peeling test (10×10) [100/100]	8.5±0.5 seconds	0.3±0.1MPa	1.3±0.3mmφ	25±5cm
UV720KF	Available upon quote	Pencil scratch tester, Mitsubishi Uni, load 1kg, scratch method [H~2H]	100:110±10	Foamed polyethylene, load 80g/cm2, 60℃, 48 hours, no appearance abnormality [Passed]	Adhesion test after being left at 85℃ for 96 hours [100/100]	40℃×98%RH×Adhesion test after 48 hours [100/100]	Sony eraser tester, load 1.64kgf, 300 times, no substrate exposure [Passed]	Rubbing test, load 500g/cm2, 2000 reciprocations, no substrate exposure [Passed]	Adhesion test after being left at -40℃ for 96 hours [100/100]	-20℃×3 hours ⇔ 60℃×3 hours, adhesion test after 10 cycles [100/100]	99.5% ethanol rubbing, load 500g/cm2,500 times, no exposed substrate [Passed]	800±100mj/cm2 *Measured using EYE UV METER UVPF-A1 (light receiving section PD-365 manufactured by EYE GRAPHICS Co., Ltd.)	60℃×5 minutes	High pressure mercury lamp	100±20W/cm	100±20mW/cm2 *Measured using EYE UV METER UVPF-A1 (light receiving section PD-365 manufactured by EYE GRAPHICS Co., Ltd.)	10±2μm	1mm square grid Cellotape peeling test (10×10) [100/100]	8.5±0.5 seconds	0.3±0.1MPa	1.3±0.3mmφ	25±5cm
UV7200KF	Available upon quote	Pencil scratch tester, Mitsubishi Uni, load 1kg, scratch method [H~2H]	100:110±10	Foamed polyethylene, load 80g/cm2, 60℃, 48 hours, no appearance abnormality [Passed]	Adhesion test after being left at 85℃ for 96 hours [100/100]	40℃×98%RH×Adhesion test after 48 hours [100/100]	Sony eraser tester, load 1.64kgf, 300 times, no substrate exposure [Passed]	Rubbing test, load 500g/cm2, 2000 reciprocations, no substrate exposure [Passed]	Adhesion test after being left at -40℃ for 96 hours [100/100]	-20℃×3 hours ⇔ 60℃×3 hours, adhesion test after 10 cycles [100/100]	99.5% ethanol rubbing, load 500g/cm2,500 times, no exposed substrate [Passed]	800±100mj/cm2 *Measured using EYE UV METER UVPF-A1 (light receiving section PD-365 manufactured by EYE GRAPHICS Co., Ltd.)	60℃×5 minutes	High pressure mercury lamp	100±20W/cm	100±20mW/cm2 *Measured using EYE UV METER UVPF-A1 (light receiving section PD-365 manufactured by EYE GRAPHICS Co., Ltd.)	10±2μm	1mm square grid Cellotape peeling test (10×10) [100/100]	8.5±0.5 seconds	0.3±0.1MPa	1.3±0.3mmφ	25±5cm

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Functional monomer Kohshylmer®

KJ Chemicals Co., Ltd.

230+ people viewing

Last viewed: 4 hours ago

UV/EB Cured Resins

UV-LED Resin Drops of the Sun Hard

Drapas Co., Ltd.

$7.01

130+ people viewing

Response time: 19.18 hours

UV/EB Cured Resins

2 models listed

UV-LED resin star drop soft type 403245

Drapas Co., Ltd.

$10.73

120+ people viewing

Response time: 19.18 hours

UV/EB Cured Resins

2 models listed

UV-LED resin star drop gummy type 403246

Drapas Co., Ltd.

$10.73

130+ people viewing

Response time: 19.18 hours

UV/EB Cured Resins

2 models listed

Hoshi no Shizuku Trial Set/Starter Set

Drapas Co., Ltd.

$17.88

140+ people viewing

Last viewed: 17 hours ago

Response time: 19.18 hours

UV/EB Cured Resins

3 models listed

Silicone -based strain -constructed UV hardened gel, which has a huge effect on vibration control of extremely small precision equipment

Taica Corporation

570+ people viewing

Last viewed: 9 hours ago

Response time: 29.36 hours

UV/EB Cured Resins

7 models listed

Gel Unisolar that cures with UV rays

Nakajima Koki Co., Ltd.

150+ people viewing

Last viewed: 9 hours ago

Response time: 46.78 hours

UV/EB Cured Resins

2 models listed

Gel UV light that cures with ultraviolet light

Nakajima Koki Co., Ltd.

140+ people viewing

Response time: 46.78 hours

UV/EB Cured Resins

Repair putty/spray LED-UV putty set 17-5120

Gengen Chemical Industry Co., Ltd.

140+ people viewing

Last viewed: 3 hours ago

Response time: 31.88 hours

UV/EB Cured Resins

3 models listed

Repair putty/spray LED-UV putty tube 50g 17-5125

Gengen Chemical Industry Co., Ltd.

140+ people viewing

Response time: 31.88 hours

UV/EB Cured Resins

3 models listed

Custom Tray Resin

Data Design Co., Ltd.

120+ people viewing

Response time: 47.14 hours

UV/EB Cured Resins

Dental LT Clear Resin V2

Data Design Co., Ltd.

130+ people viewing

Last viewed: 20 hours ago

Response time: 47.14 hours

UV/EB Cured Resins

See More UV/EB Cured Resins Products

About Company Handling This Product

Musashi Paint Co., Ltd.

Japan

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Ultraviolet curing paint Ultravine UV72 Musashi Paint Co., Ltd.

About This Product

■Summary

■Features

■Recommended thinner

■UV72-line

■UV72-KF line

■Precautions for use

4 Models of Ultraviolet curing paint Ultravine UV72

UV720

UV7200

UV720KF

UV7200KF

Customers who viewed this product also viewed

About Company Handling This Product

Related search keywords

Ultraviolet curing paint Ultravine UV72
Musashi Paint Co., Ltd.