Environmentally friendly high performance 1-component acrylic lacquer paint for plastics Ecopla Ace
Musashi Paint Co., Ltd.
About This Product
■Summary
"Ecopla Ace EC-FC52-Line" is an environmentally friendly (toluene and xylene free) acrylic lacquer paint that has adhesion to a wide range of materials. In addition, it has a wide range of coloring properties that can be used for color designs, and it dries quickly and has excellent workability.
■Features
・Adhesion to a wide range of materials
・Fast drying, good workability
・Good alcohol resistance
■Recommended thinner
・Z-EC-B743 Ecopla Ace Thinner (Quick-drying type)
・Z-EC-B745 Ecopla Ace Thinner (Standard type)
・Z-EC-B747 Ecopla Ace Thinner (Slow drying type)
■Applicable materials
・ABS
・PC
・PC/ABS
・PMMA
■Precautions for use
- If foreign substances such as mold release agents adhere to the material, it may cause poor adhesion or repellency, so please wash it before painting.
・Depending on the type of solvent, thinner may cause a decline in physical properties, so be sure to use a dedicated thinner.
- Various grades of materials are available, and their properties may differ from the original, so please check before using.
・Be sure to stir evenly before use. When painting, put the diluted paint in a stirring tank and paint while stirring.
- Avoid direct sunlight and store paint in a cool, dark place (-20 to 40℃).
-
Product
Environmentally friendly high performance 1-component acrylic lacquer paint for plastics Ecopla Ace
-
Handling Company
Musashi Paint Co., Ltd.
-
Categories
1 Models of Environmentally friendly high performance 1-component acrylic lacquer paint for plastics Ecopla Ace
| Product Image | Part Number | Price (excluding tax) | Adhesion | Alcohol resistance | Drying conditions Drying temperature x time | Drying conditions Setting temperature x time | Eraser abrasion resistance | Heat cycle resistance | Heat resistance | Migration resistance | Mixing ratio Paint: Thinner (weight ratio) | Moisture resistance | Oil and fat resistance | Paint viscosity (Iwata simple viscometer NK-2,20℃) | Painting method Gun caliber | Painting method Spray pressure | Pencil hardness | Spray gun and object distance | Standard film thickness | Weather resistance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
EC-FC52 |
Available upon quote | 1mm square grid Cellotape peeling test (10×10) [100/100] | 99.5% ethanol rubbing, 500g/cm2, 100 cycles, no substrate exposure [Passed] | 60℃×30 minutes | 25℃×5 minutes | Sony eraser tester, load 1.64kgf, 100 times, no substrate exposure [Passed] | -20℃×3 hours ⇔ 60℃×3 hours, adhesion test after 10 cycles [100/100] | Adhesion test after being left at 70℃ for 120 hours [100/100] | Load 500g on two 50mm power cords, 40℃ x 95%RH x No appearance abnormality after being left for 24 hours [Passed] | 100:110±10 | 40℃×90%RH×Adhesion test after being left for 120 hours [100/100] | Castor oil, 40℃ x 90% x Adhesion test after being left for 24 hours [100/100] | 11±1 seconds | 1.3±0.3mmφ | 0.3±0.1MPa | Pencil scratch tester, Mitsubishi Uni, load 1kg, scratch method [F] | 25±5cm | 10±2μm | Sunshine weather meter, 300 hours, color difference ⊿E=1.0 or less [Passed] |
Customers who viewed this product also viewed
About Company Handling This Product
- Japan