High performance 1-component acrylic lacquer paint for molded plastics PLACE
Musashi Paint Co., Ltd.
About This Product
■Summary
Due to the recent rise in corporate awareness of quality, there is a demand for higher quality paint film properties, and there is a need for paints that can meet improved specifications such as environmental testing and chemical resistance. ``PLAACE K716-Line'' is a paint with improved migration resistance and chemical resistance of ``PLAACE A716-LINE'' that meets these requirements.
"K716-Line" has the same adhesion to a wide range of materials as the conventional product "A716-Line", has succeeded in achieving higher brightness than the conventional product "A716-Line", and can be applied to a wide range of designs. As a result, it has been adopted as the next-generation paint for "A716-Line" in home appliances such as TVs, air conditioners, and audio equipment.
■Features
・Adhesion to a wide range of materials
・Fast drying and good workability
・Good migration resistance and abrasion resistance
・Good chemical resistance and alcohol resistance
Recommended thinner
■For ABS
・Z-27634 Plastic Ace engineering plastic thinner (quick drying type)
・Z-27637 Plastic Ace Engineering Plastic Thinner (Standard Type)
・Z-27638 Plastic Ace engineering plastic thinner (slow drying type)
■For PC, PC/ABS
・Z-27623 Plastic Ace Thinner (Quick-drying type)
・Z-27625 Plastic Ace Thinner (Standard Type)
・Z-27628 Praace thinner (slow drying type)
■For PS
・Z-27853 Plaace PS thinner (quick drying type)
・Z-27856 Plaace PS thinner (standard type)
・Z-27857 Plaace PS thinner (slow drying type)
■Applicable materials
・ABS
・PC
・PC/ABS
・PS
■Precautions for use
- If foreign substances such as mold release agents adhere to the material, it may cause poor adhesion or repellency, so please wash it before painting.
・Depending on the type of solvent, thinner may cause a decline in physical properties, so be sure to use a dedicated thinner.
- Various grades of materials are available, and their properties may differ from the original, so please check before using.
・Be sure to stir evenly before use. When painting, put the diluted paint in a stirring tank and paint while stirring.
- Avoid direct sunlight and store paint in a cool, dark place (-20 to 40℃).
-
Product
High performance 1-component acrylic lacquer paint for molded plastics PLACE
-
Handling Company
Musashi Paint Co., Ltd.
-
Categories
2 Models of High performance 1-component acrylic lacquer paint for molded plastics PLACE
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Adhesion | Alcohol resistance | Chemical resistance | Drying conditions Drying temperature x time | Drying conditions Setting temperature x time | Eraser abrasion resistance | Heat cycle resistance | Heat resistance | Migration resistance | Mixing ratio Paint: Thinner (weight ratio) | Moisture resistance | Oil and fat resistance | Paint viscosity (Iwata simple viscometer NK-2,20℃) | Painting method Gun caliber | Painting method Spray pressure | Pencil hardness | Spray gun and object distance | Standard film thickness | Type | Weather resistance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
K716 |
Available upon quote | 1mm square grid Cellotape peeling test (10×10) [100/100] | 99.5% ethanol rubbing, load 500g/cm2, 100 cycles, no substrate exposure [Passed] | Coppertone Oil Free Sunblock Lotion SPF30 0.2g applied, adhesion test after leaving at 40℃ for 24 hours [100/100] | 60℃×30 minutes | 25℃×5 minutes | Sony eraser tester, load 1.64kgf, 100 times, no substrate exposure [Passed] | -20℃×3 hours ⇔ 60℃×3 hours, adhesion test after 10 cycles [100/100] | Adhesion test after being left at 70℃ for 120 hours [100/100] | Load 500g on two 50mm power cords, 40℃ x 95%RH x No appearance abnormality after being left for 24 hours [Passed] | 100:130±20 | 40℃×90%RH×Adhesion test after being left for 120 hours [100/100] | Castor oil, 50℃ x 95%RH x Adhesion test after being left for 24 hours [100/100] | 12±2 seconds | 1.3±0.3mmφ | 0.3±0.1MPa | Pencil scratch tester, Mitsubishi Uni, load 1kg, scratch method [F] | 25±5cm | 10±2μm | - | Sunshine weather meter, 300 hours, color difference ⊿E=1.0 or less [Passed] | |
K716-E |
Available upon quote | 1mm square grid Cellotape peeling test (10×10) [100/100] | 99.5% ethanol rubbing, load 500g/cm2, 100 cycles, no substrate exposure [Passed] | Coppertone Oil Free Sunblock Lotion SPF30 0.2g applied, adhesion test after leaving at 40℃ for 24 hours [100/100] | 60℃×30 minutes | 25℃×5 minutes | Sony eraser tester, load 1.64kgf, 100 times, no substrate exposure [Passed] | -20℃×3 hours ⇔ 60℃×3 hours, adhesion test after 10 cycles [100/100] | Adhesion test after being left at 70℃ for 120 hours [100/100] | Load 500g on two 50mm power cords, 40℃ x 95%RH x No appearance abnormality after being left for 24 hours [Passed] | 100:130±20 | 40℃×90%RH×Adhesion test after being left for 120 hours [100/100] | Castor oil, 50℃ x 95%RH x Adhesion test after being left for 24 hours [100/100] | 12±2 seconds | 1.3±0.3mmφ | 0.3±0.1MPa | Pencil scratch tester, Mitsubishi Uni, load 1kg, scratch method [F] | 25±5cm | 10±2μm | For TV use, electrical shock resistance added | Sunshine weather meter, 300 hours, color difference ⊿E=1.0 or less [Passed] |
Click on the part number for more information about each product
Customers who viewed this product also viewed
About Company Handling This Product
- Japan