All Categories

History

Drain clean MDC series-MDC-11A
Drain clean MDC series-MDC-22A
Drain clean MDC series-MDC-37A
Drain clean MDC series-MDC-60
Drain clean MDC series-MDC-75A
Drain clean MDC series-MDC-150
Drain clean MDC series-MEIJI AIR COMPRESSOR MFG.CO.,LTD.

MEIJI AIR COMPRESSOR MFG.CO.,LTD.'s Response Status

Response Rate

100.0%

Response Time

36.5hours


About This Product

■Advantages of installing drain clean.

- Clears the water pollution control law oil concentration discharge standard (5mg/L) and complies with the law. - Excellent performance (actual value less than 1 mg/L) and low running costs ensure safe operation. - Significantly reduces drain processing costs. ・Supporting acquisition of ISO14001.

■Features

-Compatible with electronic automatic drain trap. ・Since no power source is used, the running cost is only the adsorbent cost. ・Can also handle 500mg/L emulsion (emulsified oil). - Simple structure saves space. ・Uses special adsorbent (patented) - ``Beautiful and rust-free'' The main body is made entirely of stainless steel. -Easy to install and connect with one-touch joint.

■Maximum amount of drain water generated

・Output: 11kW to 150kW ・Summer maximum drain amount: Approx. 1.9L/H (Annual average 1.1L/H) ~ Approx. 29.6L/H (Annual average 17.3L/H) ・Conditions: humidity 70%, suction air temperature 30℃ ・As a guideline, the amount of drain generated in spring and autumn should be approximately 1/2 of that in summer, and 1/3 in winter.

■Adsorbent replacement cycle

-Estimated usage is approximately 3.6 years. ・Screw compressor: 37kW ・Operating hours: 8 hours/day ・Operating days: 22 days/month ・Oil concentration: 150mg/L ・Annual average drain generation amount: 4.3L/H ・MDC-37A processing capacity: 33,600L ・Adsorbent usage period: 33,600/ (4.3×8×22) ≒44 months

■Drain water treatment range

Treatment concentration can be up to 500mg/L. If it is completely cloudy, treatment may not be possible. The extent to which the background can be seen is a guideline for the processing range. At the time of purchase, we measure the concentration of the primary drain water free of charge in order to determine when the adsorption layer is due to be replaced.

  • Product

    Drain clean MDC series

Share this product


260+ people viewing

Last viewed: 11 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

6 Models of Drain clean MDC series

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Applicable compressor kW Liquid feeding method Installation location Oil concentration Maximum processing capacity L/H Connection pipe diameter B (union) Judgment of lifespan External dimensions Overall width x depth x height mm Pressurized tank Oil concentration of treated water Treatment tank treatment Processing tank Processing method Total mass (treatment tank weight) kg Total processing amount 300mg/L L Total processing amount 150mg/L L Maximum operating pressure MPa Drain input conditions Temperature °C
Drain clean MDC series-Part Number-MDC-11A

MDC-11A

Available upon quote

11 or less (total)

Pneumatic feeding system with automatic drain trap
(Compatible with electronic automatic drain trap)

Install in a place that is not affected by direct sunlight, rain, or wind.

500mg/L or less (hexane extractables)

3

Inlet: Air tube Φ12 Outlet: Attached transparent drain hose (one-touch installation)

Judgment by water level gauge, oil concentration of treated water is 5mg/L or more

214×237×728

-

5mg/L or less (Normal hexane extracted substance, Water Pollution Control Act oil concentration standard value)

Replacement treatment tanks (shipped in advance) and treatment tanks that have reached the end of their service life can be replaced on-site.

Special adsorbent element tank

Oil adsorption treatment by passing through the treatment tank (natural fall method) (special adsorbent element)

14

6,300

12,600

1.37

3~40

Drain clean MDC series-Part Number-MDC-22A

MDC-22A

Available upon quote

22 or less (total)

Pneumatic feeding system with automatic drain trap
(Compatible with electronic automatic drain trap)

Install in a place that is not affected by direct sunlight, rain, or wind.

500mg/L or less (hexane extractables)

6

Inlet: Air tube Φ12 Outlet: Attached transparent drain hose (one-touch installation)

Judgment by water level gauge, oil concentration of treated water is 5mg/L or more

250×275×935

Pressure/accumulation tank

5mg/L or less (Normal hexane extracted substance, Water Pollution Control Act oil concentration standard value)

Replacement treatment tanks (shipped in advance) and treatment tanks that have reached the end of their service life can be replaced on-site.

Special adsorbent element tank

Oil adsorption treatment by passing through the treatment tank (natural fall method) (special adsorbent element)

23 (20)

10,000

20,000

1.37

3~40

Drain clean MDC series-Part Number-MDC-37A

MDC-37A

Available upon quote

37 or less (total)

Pneumatic feeding system with automatic drain trap
(Compatible with electronic automatic drain trap)

Install in a place that is not affected by direct sunlight, rain, or wind.

500mg/L or less (hexane extractables)

9

Inlet: Air tube Φ12 Outlet: Attached transparent drain hose (one-touch installation)

Judgment by water level gauge, oil concentration of treated water is 5mg/L or more

315×341×935

Pressure/accumulation tank

5mg/L or less (Normal hexane extracted substance, Water Pollution Control Act oil concentration standard value)

Replacement treatment tanks (shipped in advance) and treatment tanks that have reached the end of their service life can be replaced on-site.

Special adsorbent element tank

Oil adsorption treatment by passing through the treatment tank (natural fall method) (special adsorbent element)

36 (33)

16,800

33,600

1.37

3~40

Drain clean MDC series-Part Number-MDC-60

MDC-60

Available upon quote

60 or less (total)

Pneumatic feeding system with automatic drain trap
(Compatible with electronic automatic drain trap)

Install in a place that is not affected by direct sunlight, rain, or wind.

500mg/L or less (hexane extractables)

15

Inlet: Air tube Φ12 Outlet: Attached transparent drain hose (one-touch installation)

Judgment by water level gauge, oil concentration of treated water is 5mg/L or more

430×455×1,000

Pressure/accumulation tank

5mg/L or less (Normal hexane extracted substance, Water Pollution Control Act oil concentration standard value)

Replacement treatment tanks (shipped in advance) and treatment tanks that have reached the end of their service life can be replaced on-site.

Special adsorbent element tank

Oil adsorption treatment by passing through the treatment tank (natural fall method) (special adsorbent element)

60 (53)

27,200

54,500

1.37

3~40

Drain clean MDC series-Part Number-MDC-75A

MDC-75A

Available upon quote

75 or less (total)

Pneumatic feeding system with automatic drain trap
(Compatible with electronic automatic drain trap)

Install in a place that is not affected by direct sunlight, rain, or wind.

500mg/L or less (hexane extractables)

18

Inlet: Air tube Φ12 Outlet: Attached transparent drain hose (one-touch installation)

Judgment by water level gauge, oil concentration of treated water is 5mg/L or more

450×475×1,035

Pressure/accumulation tank

5mg/L or less (Normal hexane extracted substance, Water Pollution Control Act oil concentration standard value)

Replacement treatment tanks (shipped in advance) and treatment tanks that have reached the end of their service life can be replaced on-site.

Special adsorbent element tank

Oil adsorption treatment by passing through the treatment tank (natural fall method) (special adsorbent element)

78 (70)

35,200

70,400

1.37

3~40

Drain clean MDC series-Part Number-MDC-150

MDC-150

Available upon quote

150 or less (total)

Pneumatic feeding system with automatic drain trap
(Compatible with electronic automatic drain trap)

Install in a place that is not affected by direct sunlight, rain, or wind.

500mg/L or less (hexane extractables)

36

Inlet: Air tube Φ12 Outlet: Attached transparent drain hose (one-touch installation)

Judgment by water level gauge, oil concentration of treated water is 5mg/L or more

635×610×1,080

Pressure/accumulation tank

5mg/L or less (Normal hexane extracted substance, Water Pollution Control Act oil concentration standard value)

Replacement treatment tanks (shipped in advance) and treatment tanks that have reached the end of their service life can be replaced on-site.

Special adsorbent element tank

Oil adsorption treatment by passing through the treatment tank (natural fall method) (special adsorbent element)

170 (160)

75,000

150,000

1.37

3~40

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Automatic Drains Products

Other products of MEIJI AIR COMPRESSOR MFG.CO.,LTD.

Reviews shown here are reviews of companies.


View more products of MEIJI AIR COMPRESSOR MFG.CO.,LTD.

About Company Handling This Product

Response Rate

100.0%


Response Time

36.5hrs

Company Overview

Meiji Air Compressor Mfg. Co., Ltd., established in 1945 and located in Miyagi, Japan, is a manufacturer that ...

See More

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree