Handheld Laser Induced Breakdown Spectrometer LIBS Z-900 Series
OES Co., Ltd.
About This Product
■The latest handheld analyzer capable of measuring carbon
The Z-900 series handheld laser-induced breakdown spectrometer manufactured by SciAps in the US is lightweight at approximately 2 kg and is equipped with a battery that can be used continuously for approximately 4 hours.It also comes with one spare battery as standard. Masu. This also uses a standard high-speed charger that takes approximately 3 hours to fully charge, allowing continuous use all day long.
This allows for analysis of carbon in low alloys, on-site PMI inspection including low carbon stainless steel identification, investigation of structures, on-site testing of products, sorting of scrap, lithium, beryllium, magnesium in aluminum alloys, etc. High-precision analysis of light elements, which was difficult with fluorescent X-rays, is now possible.
■Features
・Analyzes narrow parts that were previously difficult to analyze, such as small parts, weld overlays, wires, and tube end faces.
・Using patented argon gas flushing technology, it is possible to accurately analyze light elements, analyze carbon, and even identify low-carbon stainless steel.
・Since no radiation or X-rays are used, safe operation is possible without the need for licenses or qualifications.
・In addition to silicon, magnesium, and aluminum, light elements such as lithium, beryllium, and carbon, which are difficult to measure with handheld fluorescent X-rays, can be measured in a short time.
・Uses Class 3B laser
・Use of ultra-high resolution spectrometer (190-950nm)
・Camera and video functions are standard equipment
・Weight approximately 2Kg (including battery)
・No need for expensive replacement parts or consumables such as SDD detectors, X-ray/radiation sources, etc.
■Applications
・PMI inspection including low carbon stainless steel determination ・PMI test
・Quick analysis of elements contained in alloys such as iron (low alloy steel, high alloy steel, various stainless steel), cast iron, cast steel, nickel alloy, copper, aluminum, etc.
・Sorting of scrap materials before feeding into the furnace
・Product shipping inspection
・Incoming inspection of materials, wrought materials, etc. ・Distinguishing different materials (mix-up test)
-
Product
Handheld Laser Induced Breakdown Spectrometer LIBS Z-900 Series
-
Handling Company
OES Co., Ltd.
-
Categories
4 Models of Handheld Laser Induced Breakdown Spectrometer LIBS Z-900 Series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Application | Argon gas | Data transfer | Display | External dimensions | Filter | Library | Measurable elements | Measurement time | OS | Sample pretreatment | Wavelength range (nm) | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Z-901 |
Available upon quote | General alloy testing for scrap sorting, PMI/NDT, or quality assurance. Carbon measurement not possible | Replace every 100~125 measurements (depending on settings) | USB, Wi-Fi, Bluetooth | High resolution touch panel display | W273mm×H219mm×D73mm | 4 filters | Over 500 types of alloy data | Elements common to most applications, including the light elements Be, B. Excluding C, Li, and Na. | Requires pre-processing with a grinder, etc. Multiple measurements for 9 to 12 seconds (including pre-burn) | Android OS | Pre-treatment with a grinder, etc. is required. | 200–420nm | Approximately 2Kg (including battery) |
|
|
Z-901CSi |
Available upon quote | Dedicated for measuring C, Si in steel, stainless steel, and Ni alloys | Replace every 100~125 measurements (depending on settings) | USB, Wi-Fi, Bluetooth | High resolution touch panel display | W273mm×H219mm×D73mm | 4 filters | Over 500 types of alloy data | Measurement of C and Si only. Complementary to XRF. | Requires pre-processing with a grinder, etc. Multiple measurements for 9 to 12 seconds (including pre-burn) | Android OS | Pre-treatment with a grinder, etc. is required. | 190–260nm | Approximately 2Kg (including battery) |
|
|
Z-902C+ |
Available upon quote | Measurement of carbon in alloys and other alloys. High-resolution measurement of carbon in alloys including L-grade stainless steel. | Replace every 100~125 measurements (depending on settings) | USB, Wi-Fi, Bluetooth | High resolution touch panel display | W273mm×H219mm×D73mm | 4 filters | Over 500 types of alloy data | Element range of Z-901 plus carbon | Requires pre-processing with a grinder, etc. Multiple measurements for 9 to 12 seconds (including pre-burn) | Android OS | Pre-treatment with a grinder, etc. is required. | 190–420nm | Approximately 2Kg (including battery) |
|
|
Z-903C+ |
Available upon quote | Z-902 C+ version with extended spectral range for measuring Li in alloys. | Replace every 100~125 measurements (depending on settings) | USB, Wi-Fi, Bluetooth | High resolution touch panel display | W273mm×H219mm×D73mm | 4 filters | Over 500 types of alloy data | The spectral range of Z-902 C+ can be extended to measure Li. | Requires pre-processing with a grinder, etc. Multiple measurements for 9 to 12 seconds (including pre-burn) | Android OS | Pre-treatment with a grinder, etc. is required. | 190–625nm | Approximately 2Kg (including battery) |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of OES Co., Ltd.
View more products of OES Co., Ltd.
About Company Handling This Product
- Japan