Automatic double-end terminating machine
Crimping Machine Service Co., Ltd.

TRD510

All axis AC servo motor

Φ3.0mm

Three-phase AC200V within ±10% (50/60Hz)

Approximately 690kg

5,000 pieces/hour (cutting length: 100mm)
4,200 pieces/hour (cutting length: 500mm)
3,750 pieces/hour (cutting length: 1,000mm)

0.5MPa 150l/min (NR)

Digital crimper 19.6kN

0.13~1.25m㎡／AWG26~18
*It may not be possible to process wires with good flexibility (soft).

50~20,000mm

1~16mm

1,100 (W) ×1,850 (H) ×1,810 (D) (mm)
1,700 (W) ×2,110 (H) ×2,100 (D) (mm) *Includes φ650mm terminal reel

Belt feed mechanism Practical standard speed: 6m/s, max. 10m/s possible

Maximum approximately 0.4kWh

Strip sensor, terminal presence sensor, joint sensor, wire overload sensor, wire slip detection, operating computer, safety cover, terminal crimping determination device (TCM), butt wire chopper

TR500

All-axis AC servo motor

Maximum φ3.0mm

Three-phase AC200V within ±10% (50/60Hz)
Transformer compatible: 240V, 380V, 415V within ±10% (50/60Hz) *Transformer can be installed inside the machine (optional)

Approximately 600kg

6,000 pieces/hour when both ends are crimped (cutting length: 60mm)
4,800 pieces/hour (cutting length: 500mm)
4.200 pieces/hour (cutting length: 1,000mm)

0.5MPa 150/min (ANR)

Open barrel continuous terminal (side end)

19.5kN

30 (Minimum input value) ~20,000mm *Short length clamp parts are required for both ends crimping of 45mm or less

1~10.0mm

Belt feed mechanism Practical standard speed 6m/s, maximum 10m/s possible *Feeding speed may need to be slowed down depending on the condition of the wire

Maximum approximately 0.4kWh

Touch panel controller

Strip sensor, crimp sensor, terminal presence sensor, joint sensor, wire overload sensor, wire slip detection

TRD301

AC servo motor 10 axes

Φ1.0~3.0mm

Three-phase AC200±20V 15A 50/60Hz

Main body approx. 670kg, pre-feeder approx. 40kg

4,500 pieces/h

15~25℃

0.5MPa (5kgf/cm2) 0.1m3/min (100l/min) Normal or higher

Open barrel continuous terminal side/end feed

24.5kN (2.5t)

0.2~2.0mm

80mm~9,999mm

Full strip 1~17mm (input 0.1mm increments), semi-strip 1~25mm (input 0.1mm increments)

2 languages ​​English and 1 language (Japanese, Chinese, Thai, Spanish, Indonesian)

H1,530mm x W1,080mm x D880mm (body only, excluding protrusions)

TRD301WPA

AC servo motor 12 axes

Φ1.0~3.0mm

Three-phase AC200±20V 15A 50/60Hz

Main body approx. 690kg, pre-feeder approx. 40kg

4,100 pieces/h, 2,800 pieces/h (with seals inserted on both ends), 3,000 pieces/h (with seals inserted on the front side)

15~25℃

0.5MPa (5kgf/cm2) 0.1m3/min (100l/min) Normal or higher

Open barrel continuous terminal side/end feed

24.5kN (2.5t)

0.2~2.0mm

100mm (with seal inserted) ~9,999mm

Full strip 1~17mm (input 0.1mm increments), semi-strip 1~25mm (input 0.1mm increments)

2 languages ​​English and 1 language (Japanese, Chinese, Thai, Spanish, Indonesian)

H1,530mm x W1,080mm x D880mm (body only, excluding protrusions)

Outer diameter Φ8mm, length 12mm or less Circular rubber seal

Drum type parts feeder, tube air conveyance type

TRD301WPSA

AC servo motor 12 axes

Φ1.0~3.0mm

Three-phase AC200±20V 15A 50/60Hz

Main body approx. 690kg, pre-feeder approx. 40kg

4,100 pieces/h, 3,000 pieces/h (front side seal inserted)

15~25℃

0.5MPa (5kgf/cm2) 0.1m3/min (100l/min) Normal or higher

Open barrel continuous terminal side/end feed

24.5kN (2.5t)

0.2~2.0mm

100mm (with seal inserted) ~9,999mm

Full strip 1~17mm (input 0.1mm increments), semi-strip 1~25mm (input 0.1mm increments)

2 languages ​​English and 1 language (Japanese, Chinese, Thai, Spanish, Indonesian)

H1,530mm x W1,080mm x D880mm (body only, excluding protrusions)

Outer diameter Φ8mm, length 12mm or less Circular rubber seal

Drum type parts feeder, tube air conveyance type

TRD301WPSB

AC servo motor 10 axes

Φ1.0~3.0mm

Three-phase AC200±20V 15A 50/60Hz

Main body approx. 670kg, pre-feeder approx. 40kg

4,500 pieces/h, 2,600 pieces/h (front side seal inserted)

15~25℃

0.5MPa (5kgf/cm2) 0.1m3/min (100l/min) Normal or higher

Open barrel continuous terminal side/end feed

24.5kN (2.5t)

0.2~2.0mm

100mm (with seal inserted) ~9,999mm

Full strip 1~17mm (input 0.1mm increments), semi-strip 1~25mm (input 0.1mm increments)

2 languages ​​English and 1 language (Japanese, Chinese, Thai, Spanish, Indonesian)

H1,530mm x W1,080mm x D880mm (body only, excluding protrusions)

Outer diameter Φ8mm, length 12mm or less Circular rubber seal

Drum type parts feeder, tube air conveyance type

TRD301MS

AC servo motor 10 axes

AVSS0.3~2.0mm2 CAVUS0.3~1.25mm2

Three-phase AC200±20V 15A 50/60Hz

Main body approx. 670kg, pre-feeder approx. 40kg

1,450 pieces/h (1 intermediate strip)

15~25℃

0.5MPa (5kgf/cm2) 0.1m3/min (100l/min) Normal or higher

Open barrel continuous terminal side/end feed

24.5kN (2.5t)

AVSS0.3~2.0mm2 CAVUS0.3~1.25mm2

95mm (at intermediate strip) ~9,999mm

Intermediate strip length 10~20mm Input is 5~22mm (0.1mm unit)

2 languages ​​English and 1 language (Japanese, Chinese, Thai, Spanish, Indonesian)

H1,530mm x W1,080mm x D880mm (body only, excluding protrusions)

TR201C

9-axis AC servo motor (including pre-feeder)

Φ2.5~0.5mm

Three-phase AC200V 20V 15A (50/60Hz)

Main body 420kg, pre-feeder 30kg

4,500 pieces/h (cutting length: 30mm, strip: 2mm, when both ends are crimped)

15~25℃

0.4~0.5MPa (4~5kgf/) or more 60Nl/min or more

Open barrel continuous terminal (side feed, end feed)

14.7kN (1.5t)

AWG22~32 [AWG18~36] (stranded wire)

30mm (when both ends are crimped) ~9,999mm

Full strip 1~15mm (in 0.1mm increments), semi-strip 1~25mm (in 0.1mm increments)

TR202C

8 axis AC servo motor

Φ0.8~3.2mm

Three-phase AC200V 20V 15A (50/60Hz)

Body approx. 400kg

4,500 pieces/h (cutting length: 30mm, strip: 5mm, when both ends are crimped)

15~25℃

0.4~0.5MPa (4~5kgf/) or more

Open barrel continuous terminal (side feed, end feed)

19.6kN (2.0t)

AWG16~28 (stranded wire)

30mm~9,999mm

Full strip 1~15mm (in 0.1mm increments), semi-strip 1~25mm (in 0.1mm increments)