Ultra-fine droplet transfer dispenser femto-Spotter-FS-100M

Ultra-fine droplet transfer dispenser femto-Spotter-FS-100M-LL

Ultra-fine droplet transfer dispenser femto-Spotter-FS-200M

Ultra-fine droplet transfer dispenser femto-Spotter-FS-100M-sysD

Ultra-fine droplet transfer dispenser femto-Spotter-FS-100M-sysDA

Ultra-fine droplet transfer dispenser femto-Spotter-FS-100M-sysAD-Dual

Ultra-fine droplet transfer dispenser femto-Spotter-FS-100M-H

Ultra-fine droplet transfer dispenser femto-Spotter
DINOV Co., Ltd.

DINOV Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

112.0hours

About This Product

■Product introductionAdvances in manufacturing technology have made precision liquid dispensing extremely important. There is an increasing need for advanced techniques to accurately apply pastes and other materials to minute areas.

Equipped with advanced technology, an innovative dispenser was born. This is the birth of "femto-Spotter" which can apply ultra-fine liquid.

We will greatly improve the shortcomings of conventional dispensers and provide new liquid control technology. Controls ultra-small amounts of liquid to ensure accurate and reliable dispensing. "femto-Spotter" solves problems at manufacturing sites.

■Summary- Smaller, more precise, and more reliable. This is a new dispenser system that can apply ultra-fine droplets to meet the needs of the manufacturing industry.
・"Femto-Spotter" is a revolutionary technology that can transfer (apply) a small amount of liquid to a precise location.
・The amount is extremely small, fL (femtoliter). What's more, it can handle high viscosity liquids, solving the problems associated with conventional dispensers.
- femto-SpotterTM can be used alone or incorporated into a system.
- Wide range of support from research and development to mass production.

■Minute amount applicationDispenser that can apply unprecedentedly small amounts of liquid (fL, pL, nL)

■Compatible with high viscosity liquidsCan apply various liquids from low viscosity to high viscosity (~200,000mPas・s)

■AccuracyCan be applied to precise locations (position accuracy: several µm)

■Contains fillerCompatible with liquids containing fillers

■No cloggingNo clogging as liquid is forced out

■No dead volumeUse up to the last drop even with expensive liquids

■CompactSupports further compactness of the main body

■CustomizeSupports flexible customization

■SystematizationDesktop test equipment, mass production compatible equipment

■As a liquid control technology essential to the manufacturing industry・Solder paste, flux
·glue
・Ink, paint
・Conductive paste
・Resist
・Organic materials
・Resin solution
・Nanoparticle suspension

■For research and development・Expensive liquids such as DNA and reagents
・Patterning with conductive ink
・Quantitative determination of adhesive amount
・Application of nano-dispersed particles
・Rapid prototyping for MEMS, etc.
・High-density optical element
・Surface treatment of micro areas
・Repair of fine wiring defects
・Micro coating

Model
There are 8 models for this product.

Product
Ultra-fine droplet transfer dispenser femto-Spotter

Handling Company
DINOV Co., Ltd.

Categories

Machining / Machine Tools

Coating Process Equipment

Machining / Machine Tools

Liquid Dispensers

Adhesives & Repair Materials

Glue Dispensers

330+ people viewing

Last viewed: 10 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

8 Models of Ultra-fine droplet transfer dispenser femto-Spotter

Click on the part number for more information about each product

Part Number	Price (excluding tax)	Head weight	Head body size	Head method	Head compatible viscosity	Head application amount	Head application diameter	Comparison of performance with other dispenser systems	Performance comparison with other dispenser methods Dispensing accuracy	Performance comparison with other dispenser methods Application diameter	Performance comparison with other dispenser systems Dispensing times times/sec
FS-100M	Available upon quote	Approximately 200g	36mm x 36mm x 170mm *Does not include protrusions.	Needle transfer method	1 ~ 200,000mPa・s	FL ~ nL *Depends on coating liquid and material to be coated.	5 µm ~ 1 mm *Depends on coating liquid and material to be coated.	Tube type (△): 1,000 mPa・s Screw type (△): 3,000 mPa・s Screw type (×): 100 mPa・s femto-Spotter (◎): 100,000 mPa・s	Tube type (×): ±30µm Screw type (×): ±30µm Jet type (×): ±100µm femto-Spotter (◎) : ±5μm	Tube type (△): 0.1mm or more Screw type (×): 0.2mm or more Jet type (×): Diameter 0.2mm femto-Spotter (◎) : ＞ Diameter 0.005mm	Tube type: – Screw type (△): 1 time~ Jet type (◎): ~1,000 times femto-Spotter (〇) : Several times~
FS-100M-LL	Available upon quote	Approximately 200g	36mm x 36mm x 170mm *Does not include protrusions.	Needle transfer method	1 ~ 200,000mPa・s	FL ~ nL *Depends on coating liquid and material to be coated.	5 µm ~ 1 mm *Depends on coating liquid and material to be coated.	Tube type (△): 1,000 mPa・s Screw type (△): 3,000 mPa・s Screw type (×): 100 mPa・s femto-Spotter (◎): 100,000 mPa・s	Tube type (×): ±30µm Screw type (×): ±30µm Jet type (×): ±100µm femto-Spotter (◎) : ±5μm	Tube type (△): 0.1mm or more Screw type (×): 0.2mm or more Jet type (×): Diameter 0.2mm femto-Spotter (◎) : ＞ Diameter 0.005mm	Tube type: – Screw type (△): 1 time~ Jet type (◎): ~1,000 times femto-Spotter (〇) : Several times~
FS-200M	Available upon quote	Approximately 200g	36mm x 36mm x 170mm *Does not include protrusions.	Needle transfer method	1 ~ 200,000mPa・s	FL ~ nL *Depends on coating liquid and material to be coated.	5 µm ~ 1 mm *Depends on coating liquid and material to be coated.	Tube type (△): 1,000 mPa・s Screw type (△): 3,000 mPa・s Screw type (×): 100 mPa・s femto-Spotter (◎): 100,000 mPa・s	Tube type (×): ±30µm Screw type (×): ±30µm Jet type (×): ±100µm femto-Spotter (◎) : ±5μm	Tube type (△): 0.1mm or more Screw type (×): 0.2mm or more Jet type (×): Diameter 0.2mm femto-Spotter (◎) : ＞ Diameter 0.005mm	Tube type: – Screw type (△): 1 time~ Jet type (◎): ~1,000 times femto-Spotter (〇) : Several times~
FS-100M-sysD	Available upon quote	Approximately 200g	36mm x 36mm x 170mm *Does not include protrusions.	Needle transfer method	1 ~ 200,000mPa・s	FL ~ nL *Depends on coating liquid and material to be coated.	5 µm ~ 1 mm *Depends on coating liquid and material to be coated.	Tube type (△): 1,000 mPa・s Screw type (△): 3,000 mPa・s Screw type (×): 100 mPa・s femto-Spotter (◎): 100,000 mPa・s	Tube type (×): ±30µm Screw type (×): ±30µm Jet type (×): ±100µm femto-Spotter (◎) : ±5μm	Tube type (△): 0.1mm or more Screw type (×): 0.2mm or more Jet type (×): Diameter 0.2mm femto-Spotter (◎) : ＞ Diameter 0.005mm	Tube type: – Screw type (△): 1 time~ Jet type (◎): ~1,000 times femto-Spotter (〇) : Several times~
FS-100M-sysDA	Available upon quote	Approximately 200g	36mm x 36mm x 170mm *Does not include protrusions.	Needle transfer method	1 ~ 200,000mPa・s	FL ~ nL *Depends on coating liquid and material to be coated.	5 µm ~ 1 mm *Depends on coating liquid and material to be coated.	Tube type (△): 1,000 mPa・s Screw type (△): 3,000 mPa・s Screw type (×): 100 mPa・s femto-Spotter (◎): 100,000 mPa・s	Tube type (×): ±30µm Screw type (×): ±30µm Jet type (×): ±100µm femto-Spotter (◎) : ±5μm	Tube type (△): 0.1mm or more Screw type (×): 0.2mm or more Jet type (×): Diameter 0.2mm femto-Spotter (◎) : ＞ Diameter 0.005mm	Tube type: – Screw type (△): 1 time~ Jet type (◎): ~1,000 times femto-Spotter (〇) : Several times~
FS-100M-sysAD-Dual	Available upon quote	Approximately 200g	36mm x 36mm x 170mm *Does not include protrusions.	Needle transfer method	1 ~ 200,000mPa・s	FL ~ nL *Depends on coating liquid and material to be coated.	5 µm ~ 1 mm *Depends on coating liquid and material to be coated.	Tube type (△): 1,000 mPa・s Screw type (△): 3,000 mPa・s Screw type (×): 100 mPa・s femto-Spotter (◎): 100,000 mPa・s	Tube type (×): ±30µm Screw type (×): ±30µm Jet type (×): ±100µm femto-Spotter (◎) : ±5μm	Tube type (△): 0.1mm or more Screw type (×): 0.2mm or more Jet type (×): Diameter 0.2mm femto-Spotter (◎) : ＞ Diameter 0.005mm	Tube type: – Screw type (△): 1 time~ Jet type (◎): ~1,000 times femto-Spotter (〇) : Several times~
FS-100M-H	Available upon quote	Approximately 200g	36mm x 36mm x 170mm *Does not include protrusions.	Needle transfer method	1 ~ 200,000mPa・s	FL ~ nL *Depends on coating liquid and material to be coated.	5 µm ~ 1 mm *Depends on coating liquid and material to be coated.	Tube type (△): 1,000 mPa・s Screw type (△): 3,000 mPa・s Screw type (×): 100 mPa・s femto-Spotter (◎): 100,000 mPa・s	Tube type (×): ±30µm Screw type (×): ±30µm Jet type (×): ±100µm femto-Spotter (◎) : ±5μm	Tube type (△): 0.1mm or more Screw type (×): 0.2mm or more Jet type (×): Diameter 0.2mm femto-Spotter (◎) : ＞ Diameter 0.005mm	Tube type: – Screw type (△): 1 time~ Jet type (◎): ~1,000 times femto-Spotter (〇) : Several times~
FS-200M-sysDA2	Available upon quote	Approximately 200g	36mm x 36mm x 170mm *Does not include protrusions.	Needle transfer method	1 ~ 200,000mPa・s	FL ~ nL *Depends on coating liquid and material to be coated.	5 µm ~ 1 mm *Depends on coating liquid and material to be coated.	Tube type (△): 1,000 mPa・s Screw type (△): 3,000 mPa・s Screw type (×): 100 mPa・s femto-Spotter (◎): 100,000 mPa・s	Tube type (×): ±30µm Screw type (×): ±30µm Jet type (×): ±100µm femto-Spotter (◎) : ±5μm	Tube type (△): 0.1mm or more Screw type (×): 0.2mm or more Jet type (×): Diameter 0.2mm femto-Spotter (◎) : ＞ Diameter 0.005mm	Tube type: – Screw type (△): 1 time~ Jet type (◎): ~1,000 times femto-Spotter (〇) : Several times~

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Spray type flux applicator VD-7000

Osaka Asahi Chemical Co., Ltd.

80+ people viewing

Last viewed: 14 minutes ago

Response time: 0.83 hours

Coating Process Equipment

3 models listed

Flange applicator X-1

Tokki Co., Ltd.

100+ people viewing

Last viewed: 18 minutes ago

Response time: 0.61 hours

Coating Process Equipment

3 models listed

1-component Super Shot Wetted part resin micro-application valve Diaphragm valve SDV-100

Nippon Sossee Kogyo Co., Ltd.

90+ people viewing

Last viewed: 2 hours ago

Response time: 24.82 hours

Coating Process Equipment

3 models listed

Two-component material transfer solution Z Pump

Graco Inc.

4.5

290+ people viewing

Last viewed: 14 minutes ago

Response time: 14.60 hours

Coating Process Equipment

10 models listed

Custom solder printing machine (general purpose machine) TSP-770

Tenryu Seiki Co., Ltd.

100+ people viewing

Last viewed: 14 hours ago

Response time: 27.29 hours

Coating Process Equipment

3 models listed

Point spray fluxer F-500T

Osaka Asahi Chemical Co., Ltd.

90+ people viewing

Last viewed: 14 minutes ago

Response time: 0.83 hours

Coating Process Equipment

3 models listed

Flange applicator X-2

Tokki Co., Ltd.

110+ people viewing

Last viewed: 14 minutes ago

Response time: 0.61 hours

Coating Process Equipment

3 models listed

1-liquid Super Shot Ultra-small amount dispensing dispenser equipped with an ultra-precision pump unit 1-liquid automatic metering and fixed-quantity dispensing machine SSP series

Nippon Sossee Kogyo Co., Ltd.

70+ people viewing

Last viewed: 17 minutes ago

Response time: 24.82 hours

Coating Process Equipment

3 models listed

Precision dispensing controller DC600 series

Yagyu Shokai Co., Ltd.

$780.00

90+ people viewing

Last viewed: 2 hours ago

Response time: 2.85 hours

Coating Process Equipment

3 models listed

Barcoder with automatic copying function

UK Tech Co., Ltd.

100+ people viewing

Last viewed: 22 hours ago

Response time: 0.32 hours

Coating Process Equipment

2 models listed

Spray type flux applicator F-400T

Osaka Asahi Chemical Co., Ltd.

90+ people viewing

Last viewed: 17 minutes ago

Response time: 0.83 hours

Coating Process Equipment

3 models listed

Flange applicator X-3

Tokki Co., Ltd.

140+ people viewing

Last viewed: 14 minutes ago

Response time: 0.61 hours

Coating Process Equipment

3 models listed

See More Coating Process Equipment Products

Other products of DINOV Co., Ltd.

Reviews shown here are reviews of companies.

Laser system dinoEASY

DINOV Co., Ltd.

140+ people viewing

Response time: 112.02 hours

Laser Machinery

Laser system dinoCOMPACT

DINOV Co., Ltd.

100+ people viewing

Last viewed: 16 minutes ago

Response time: 112.02 hours

Laser Machinery

Laser system dinoSCRIBE

DINOV Co., Ltd.

120+ people viewing

Last viewed: 5 hours ago

Response time: 112.02 hours

Laser Markers

3 models listed

Laser system dinoENTRY

DINOV Co., Ltd.

130+ people viewing

Last viewed: 17 minutes ago

Response time: 112.02 hours

Laser Machinery

Laser System Picosecond Laser Test Bench

DINOV Co., Ltd.

110+ people viewing

Response time: 112.02 hours

Laser system dinoDRILL

DINOV Co., Ltd.

90+ people viewing

Last viewed: 13 minutes ago

Response time: 112.02 hours

Laser Machinery

Laser system dinoRESEARCH

DINOV Co., Ltd.

100+ people viewing

Response time: 112.02 hours

Laser system dinoTHERMO

DINOV Co., Ltd.

80+ people viewing

Last viewed: 11 minutes ago

Response time: 112.02 hours

Laser system dinoCMD

DINOV Co., Ltd.

90+ people viewing

Response time: 112.02 hours

Solder feeder micro-Feeder

DINOV Co., Ltd.

100+ people viewing

Last viewed: 5 minutes ago

Response time: 112.02 hours

View more products of DINOV Co., Ltd.

About Company Handling This Product

DINOV Co., Ltd.

Response Rate

100.0%

Response Time

112.0hrs

Japan

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Ultra-fine droplet transfer dispenser femto-Spotter DINOV Co., Ltd.

DINOV Co., Ltd.'s Response Status

About This Product

■Product introduction

■Summary

■Minute amount application

■Compatible with high viscosity liquids

■Accuracy

■Contains filler

■No clogging

■No dead volume

■Compact

■Customize

■Systematization

■As a liquid control technology essential to the manufacturing industry

■For research and development

8 Models of Ultra-fine droplet transfer dispenser femto-Spotter

Customers who viewed this product also viewed

Other products of DINOV Co., Ltd.

About Company Handling This Product

Related search keywords

Ultra-fine droplet transfer dispenser femto-Spotter
DINOV Co., Ltd.