Sample analysis resin Technovit® 4006-Powder 1×1,000g

Sample analysis resin Technovit® 4006
Mets Japan Co., Ltd.

Mets Japan Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

4.6hours

Very Fast Response

About This Product

■Resin for sample analysis manufactured by KULZER in Germany Technovit® 4006Technovit 4006 is an acrylic cold cure resin with higher transparency and lower heat stress than 4004. It is cured with two components: powder and liquid.

■Material propertiesTechnovit 4006 is transparent, making it ideal when you need to see embedded specimens during specimen preparation.

■How to useMixing ratio 2:1 (powder:liquid) Thoroughly mix the powder and liquid in a mixing cup. After mixing, it will harden in 9-12 minutes.

■Precautions for useTechnovit 4006 produces bubbles during curing. By using the pressurizer Technomat, it is possible to embed resin with fewer air bubbles and high transparency.

Model
There are 6 models available for this product.

Product
Sample analysis resin Technovit® 4006

Handling Company
Mets Japan Co., Ltd.

340+ people viewing

Last viewed: 51 minutes ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

6 Models of Sample analysis resin Technovit® 4006

Click on the part number for more information about each product

Part Number	Price (excluding tax)	Steel ball indentation hardness (DIN53456)	Amount	Product number	Product composition	Color	Impact strength	Linear thermal expansion coefficient	Linear shrinkage rate	Curing time (under 22℃ environment)	Maximum temperature during curing	Upper limit of stable temperature after curing	Solubility	Mixing ratio	Working time after mixing	Bending strength	Elastic modulus	Refractive index (monomer)	Refractive index (polymer)	Density = spec weight (DIN 53479)	Compressive strength	Water absorption (DIN 53495)	Estimated storage period	Recommended storage temperature	Volumetric shrinkage rate	Main uses	Shore D
Powder 1×1,000g	Available upon quote	Approximately 169N/㎟	1×1,000g	66020676	Powder/liquid	Transparent	Approximately 5.8 kJ/㎡	Approximately 10.8ppm	1.0:1 ⇒ approx. 2.25% 1.8:1 ⇒ approx. 2.08% 2.3:1 ⇒ approx. 1.80%	Approximately 9 ~ 13 minutes	Approximately 99℃	Approximately 125℃	Swelling	Twenty one	Approximately 4 minutes	Approximately 105N/㎟	Approximately 2,200~2,500Mpa	1.425	1.436	Approximately 1.14 g/㎤	Approximately 120~140N/㎟	Approximately 0.38Vol-%	About 3 years	25℃	1.0:1 ⇒ approx. 6.75% 1.8:1 ⇒ approx. 5.8% 2.3:1 ⇒ approx. 5.4%	Embedding with pressure to suppress air bubbles	84
Powder 2×1,000g	Available upon quote	Approximately 169N/㎟	2×1,000g	66020679	Powder/liquid	Transparent	Approximately 5.8 kJ/㎡	Approximately 10.8ppm	1.0:1 ⇒ approx. 2.25% 1.8:1 ⇒ approx. 2.08% 2.3:1 ⇒ approx. 1.80%	Approximately 9 ~ 13 minutes	Approximately 99℃	Approximately 125℃	Swelling	Twenty one	Approximately 4 minutes	Approximately 105N/㎟	Approximately 2,200~2,500Mpa	1.425	1.436	Approximately 1.14 g/㎤	Approximately 120~140N/㎟	Approximately 0.38Vol-%	About 3 years	25℃	1.0:1 ⇒ approx. 6.75% 1.8:1 ⇒ approx. 5.8% 2.3:1 ⇒ approx. 5.4%	Embedding with pressure to suppress air bubbles	84
Powder 1×10,000g	Available upon quote	Approximately 169N/㎟	1×10,000g	66020677	Powder/liquid	Transparent	Approximately 5.8 kJ/㎡	Approximately 10.8ppm	1.0:1 ⇒ approx. 2.25% 1.8:1 ⇒ approx. 2.08% 2.3:1 ⇒ approx. 1.80%	Approximately 9 ~ 13 minutes	Approximately 99℃	Approximately 125℃	Swelling	Twenty one	Approximately 4 minutes	Approximately 105N/㎟	Approximately 2,200~2,500Mpa	1.425	1.436	Approximately 1.14 g/㎤	Approximately 120~140N/㎟	Approximately 0.38Vol-%	About 3 years	25℃	1.0:1 ⇒ approx. 6.75% 1.8:1 ⇒ approx. 5.8% 2.3:1 ⇒ approx. 5.4%	Embedding with pressure to suppress air bubbles	84
Liquid 1×500ml	Available upon quote	Approximately 169N/㎟	1×500 mℓ	66020680	Powder/liquid	Transparent	Approximately 5.8 kJ/㎡	Approximately 10.8ppm	1.0:1 ⇒ approx. 2.25% 1.8:1 ⇒ approx. 2.08% 2.3:1 ⇒ approx. 1.80%	Approximately 9 ~ 13 minutes	Approximately 99℃	Approximately 125℃	Swelling	Twenty one	Approximately 4 minutes	Approximately 105N/㎟	Approximately 2,200~2,500Mpa	1.425	1.436	Approximately 1.14 g/㎤	Approximately 120~140N/㎟	Approximately 0.38Vol-%	About 3 years	25℃	1.0:1 ⇒ approx. 6.75% 1.8:1 ⇒ approx. 5.8% 2.3:1 ⇒ approx. 5.4%	Embedding with pressure to suppress air bubbles	84
Liquid 1×1,000mℓ	Available upon quote	Approximately 169N/㎟	1×1,000 mℓ	66020678	Powder/liquid	Transparent	Approximately 5.8 kJ/㎡	Approximately 10.8ppm	1.0:1 ⇒ approx. 2.25% 1.8:1 ⇒ approx. 2.08% 2.3:1 ⇒ approx. 1.80%	Approximately 9 ~ 13 minutes	Approximately 99℃	Approximately 125℃	Swelling	Twenty one	Approximately 4 minutes	Approximately 105N/㎟	Approximately 2,200~2,500Mpa	1.425	1.436	Approximately 1.14 g/㎤	Approximately 120~140N/㎟	Approximately 0.38Vol-%	About 3 years	25℃	1.0:1 ⇒ approx. 6.75% 1.8:1 ⇒ approx. 5.8% 2.3:1 ⇒ approx. 5.4%	Embedding with pressure to suppress air bubbles	84
Liquid 1×5,000mℓ	Available upon quote	Approximately 169N/㎟	1×5,000 mℓ	66020681	Powder/liquid	Transparent	Approximately 5.8 kJ/㎡	Approximately 10.8ppm	1.0:1 ⇒ approx. 2.25% 1.8:1 ⇒ approx. 2.08% 2.3:1 ⇒ approx. 1.80%	Approximately 9 ~ 13 minutes	Approximately 99℃	Approximately 125℃	Swelling	Twenty one	Approximately 4 minutes	Approximately 105N/㎟	Approximately 2,200~2,500Mpa	1.425	1.436	Approximately 1.14 g/㎤	Approximately 120~140N/㎟	Approximately 0.38Vol-%	About 3 years	25℃	1.0:1 ⇒ approx. 6.75% 1.8:1 ⇒ approx. 5.8% 2.3:1 ⇒ approx. 5.4%	Embedding with pressure to suppress air bubbles	84

Click on the part number for more information about each product

Other products of Mets Japan Co., Ltd.

Reviews shown here are reviews of companies.

Small sample cutting machine MECATOME T205

Mets Japan Co., Ltd.

350+ people viewing

Last viewed: 14 hours ago

Response time: 4.55 hours

Cutting Machinery

4 models listed

Small sample cutting machine FLEXICUT

Mets Japan Co., Ltd.

210+ people viewing

Response time: 4.55 hours

Cutting Machinery

4 models listed

Medium-sized sample cutting machine MECATOME T215

Mets Japan Co., Ltd.

260+ people viewing

Response time: 4.55 hours

Cutting Machinery

4 models listed

Large sample cutting machine MECATOME T265

Mets Japan Co., Ltd.

200+ people viewing

Last viewed: 12 hours ago

Response time: 4.55 hours

Cutting Machinery

3 models listed

Large sample cutting machine MECATOME ST310

Mets Japan Co., Ltd.

210+ people viewing

Last viewed: 2 hours ago

Response time: 4.55 hours

Cutting Machinery

3 models listed

Large sample cutting machine MECATOME T305

Mets Japan Co., Ltd.

200+ people viewing

Last viewed: 2 seconds ago

Response time: 4.55 hours

Cutting Machinery

3 models listed

Large sample cutting machine MECATOME T335

Mets Japan Co., Ltd.

190+ people viewing

Last viewed: 3 hours ago

Response time: 4.55 hours

Cutting Machinery

4 models listed

Ultra-large specimen cutting machine EVO 400/400＋/450

Mets Japan Co., Ltd.

270+ people viewing

Last viewed: 20 hours ago

Response time: 4.55 hours

Cutting Machinery

6 models listed

Sample cutting machine consumables

Mets Japan Co., Ltd.

180+ people viewing

Last viewed: 4 seconds ago

Response time: 4.55 hours

Whetstones

2 models listed

Consumables Anti-corrosion additive Antilast

Mets Japan Co., Ltd.

190+ people viewing

Last viewed: 2 hours ago

Response time: 4.55 hours

Corrosion Inhibitors

3 models listed

Sample analysis resin Technovit® 4004

Mets Japan Co., Ltd.

360+ people viewing

Last viewed: 10 hours ago

Response time: 4.55 hours

6 models listed

Defoamer for room temperature epoxy/polyester resin polyvac

Mets Japan Co., Ltd.

130+ people viewing

Last viewed: 2 seconds ago

Response time: 4.55 hours

View more products of Mets Japan Co., Ltd.

About Company Handling This Product

Mets Japan Co., Ltd.

Response Rate

100.0%

Response Time

4.6hrs

Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Sample analysis resin Technovit® 4006 Mets Japan Co., Ltd.

Mets Japan Co., Ltd.'s Response Status

About This Product

■Resin for sample analysis manufactured by KULZER in Germany Technovit® 4006

■Material properties

■How to use

■Precautions for use

6 Models of Sample analysis resin Technovit® 4006

Powder 1×1,000g

Powder 2×1,000g

Powder 1×10,000g

Liquid 1×500ml

Liquid 1×1,000mℓ

Liquid 1×5,000mℓ

Other products of Mets Japan Co., Ltd.

About Company Handling This Product

Sample analysis resin Technovit® 4006
Mets Japan Co., Ltd.