All Categories

History

Spot LED/Fiber LED Lighting Department LED Fiber Strobe LFS Series-LFS-15K
Spot LED/Fiber LED Lighting Department LED Fiber Strobe LFS Series-Nissin Electronics Industry Co., Ltd.

Spot LED/Fiber LED Lighting Department LED Fiber Strobe LFS Series
Nissin Electronics Industry Co., Ltd.

Nissin Electronics Industry Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

19.0hours

Relatively Fast Response


About This Product

LED lighting for industrial use and image processing "LED Luminar Series". We create a wide variety of reliable, stable lighting while fully drawing out the excellent characteristics of LEDs, such as long life, power savings, and a variety of colors. In addition to ring type, line type, and transmission type, you can choose from a complete lineup including spot lighting, fiber lighting series, and infrared/ultraviolet LED lighting. ■Fiber lighting fiber strobe LFS SERIES Spot light/Parallel light/Diffused light LED strobe lighting that is directly connected to a fiber light guide. By using power LEDs and special optical design, it achieves high-brightness light emission with a stable amount of light while saving power. The light emission time width can be set from a minimum of 1μs, making it ideal for high-speed flying objects such as inkjet devices and strobe light sources for high-magnification photography. *An external trigger signal is required for strobe firing. ■Applications ・High-speed flying objects such as inkjet ・Strobe light source for high magnification shooting Features ■About the dimming function of D type and A type ・D type: Manual dimming function (100 gradations) using digital switch is also available. ・Type A: Manual dimming function using analog volume is also available. ■High-brightness light emission with low power consumption Power LED and special optical design realize high brightness light emission with low power consumption. Emission colors can be selected from white, green, blue, red, infrared (infrared 850mm, 940mm), and ultraviolet (365mm, 385mm). ■Long-life and quiet LED strobe Since the strobe light is emitted by LED, the lamp has a long life and does not require replacement. Since it is fanless, excellent quietness can be ensured. ■Stable light emission with no fluctuations in light intensity The light emission time is 1μs to 9.9ms, and the repetition cycle can be set up to 10kHz. There is no fluctuation in light intensity between flashes. Since it is directly connected to a fiber light guide, you can use your existing light guide as is. *An external trigger signal input is required for firing. ■Others ・It is also possible to set and vary the emission time width using an external signal. - Models that support external signal dimming are also available. *Other product numbers are available.

  • Product

    Spot LED/Fiber LED Lighting Department LED Fiber Strobe LFS Series

Share this product


110+ people viewing

Last viewed: 7 hours ago


Free
Since our quotes are free, feel free to use our service.

No Phone Number Required
You won’t have to worry about receiving unnecessary calls.

10 Models of Spot LED/Fiber LED Lighting Department LED Fiber Strobe LFS Series

Items marked with have different values depending on the model number.

Click on the part number for more information about each product

Product Image Part Number Price (excluding tax) Digital dimming control code Dimming Dimming range Emission frequency range External dimensions Features Input power supply voltage Light emission time width setting range Mass Power consumption Strobe light emission time width control code Strobe lighting control code Type
Spot LED/Fiber LED Lighting Department LED Fiber Strobe LFS Series-Part Number-LFS-15K

LFS-15K

Available upon quote - Manual dimming with analog volume Approximately 25~100% 0~10kHz (Light emission time width is limited when over 100Hz) W122×H66×D204mm (excluding protrusions) Analog volume dimming AC85~264V Between 1 and 990μs (set in 1μs increments between 1 and 99μs, and in 10μs increments between 10 and 990μs) 1.4kg 16W LS-HJ series LS-SIG series S type K type (Light emission time set between 1~990μs)
Spot LED/Fiber LED Lighting Department LED Fiber Strobe LFS Series-Part Number-LFS-15K-A

LFS-15K-A

Available upon quote - Manual dimming with analog volume
Dimming by external voltage signal (0~5V)
Approximately 25~100% 0~10kHz (Light emission time width is limited when over 100Hz) W122×H66×D204mm (excluding protrusions) External analog voltage signal dimming (0-5V) AC85~264V Between 1 and 990μs (set in 1μs increments between 1 and 99μs, and in 10μs increments between 10 and 990μs) 1.4kg 16W LS-HJ series LSA-SIG series S type K type (Light emission time set between 1~990μs)
Spot LED/Fiber LED Lighting Department LED Fiber Strobe LFS Series-Part Number-LFS-15K-D

LFS-15K-D

Available upon quote LD-KC series S-D type Manual dimming with digital switch (100 gradations)
Dimming by external 8-bit digital signal (BCD code)
Approximately 25~100% 0~10kHz (Light emission time width is limited when over 100Hz) W122×H66×D204mm (excluding protrusions) External digital signal dimming (BCD code) AC85~264V Between 1 and 990μs (set in 1μs increments between 1 and 99μs, and in 10μs increments between 10 and 990μs) 1.4kg 16W LS-HJ series LS-SIG series S type K type (Light emission time set between 1~990μs)
Spot LED/Fiber LED Lighting Department LED Fiber Strobe LFS Series-Part Number-LFS-15M

LFS-15M

Available upon quote - Manual dimming with analog volume Approximately 25~100% 0~10kHz (Light emission time width is limited when over 10Hz) W122×H66×D204mm (excluding protrusions) Analog volume dimming AC85~264V Between 10μs and 9.9ms (set in 10μs increments between 10 and 990μs, and in 100μs increments between 100μs and 9.9ms) 1.4kg 16W LS-HJ series LS-SIG series S type M type (Light emission time set between 10μs and 9.9ms)
Spot LED/Fiber LED Lighting Department LED Fiber Strobe LFS Series-Part Number-LFS-15M-A

LFS-15M-A

Available upon quote - Manual dimming with analog volume
Dimming by external voltage signal (0~5V)
Approximately 25~100% 0~10kHz (Light emission time width is limited when over 10Hz) W122×H66×D204mm (excluding protrusions) External analog voltage signal dimming (0-5V) AC85~264V Between 10μs and 9.9ms (set in 10μs increments between 10 and 990μs, and in 100μs increments between 100μs and 9.9ms) 1.4kg 16W LS-HJ series LSA-SIG series S type M type (Light emission time set between 10μs and 9.9ms)
Spot LED/Fiber LED Lighting Department LED Fiber Strobe LFS Series-Part Number-LFS-15M-D

LFS-15M-D

Available upon quote LD-KC series S-D type Manual dimming with digital switch (100 gradations)
Dimming by external 8-bit digital signal (BCD code)
Approximately 25~100% 0~10kHz (Light emission time width is limited when over 10Hz) W122×H66×D204mm (excluding protrusions) External digital signal dimming (BCD code) AC85~264V Between 10μs and 9.9ms (set in 10μs increments between 10 and 990μs, and in 100μs increments between 100μs and 9.9ms) 1.4kg 16W LS-HJ series LS-SIG series S type M type (Light emission time set between 10μs and 9.9ms)
Spot LED/Fiber LED Lighting Department LED Fiber Strobe LFS Series-Part Number-LFS-15K-IR

LFS-15K-IR

Available upon quote - Manual dimming with analog volume Approximately 25~100% 0~10kHz (Light emission time width is limited when over 100Hz) W122×H66×D204mm (excluding protrusions) Analog volume dimming AC85~264V Between 1 and 990μs (set in 1μs increments between 1 and 99μs, and in 10μs increments between 10 and 990μs) 1.4kg 16W LS-HJ series LS-SIG series S type K type (Light emission time set between 1~990μs)
Spot LED/Fiber LED Lighting Department LED Fiber Strobe LFS Series-Part Number-LFS-15K-IR940

LFS-15K-IR940

Available upon quote - Manual dimming with analog volume Approximately 25~100% 0~10kHz (Light emission time width is limited when over 100Hz) W122×H66×D204mm (excluding protrusions) Analog volume dimming AC85~264V Between 1 and 990μs (set in 1μs increments between 1 and 99μs, and in 10μs increments between 10 and 990μs) 1.4kg 16W LS-HJ series LS-SIG series S type K type (Light emission time set between 1~990μs)
Spot LED/Fiber LED Lighting Department LED Fiber Strobe LFS Series-Part Number-LFS-15K-A-IR

LFS-15K-A-IR

Available upon quote - Manual dimming with analog volume
Dimming by external voltage signal (0~5V)
Approximately 25~100% 0~10kHz (Light emission time width is limited when over 100Hz) W122×H66×D204mm (excluding protrusions) External analog voltage signal dimming (0-5V) AC85~264V Between 1 and 990μs (set in 1μs increments between 1 and 99μs, and in 10μs increments between 10 and 990μs) 1.4kg 16W LS-HJ series LSA-SIG series S type K type (Light emission time set between 1~990μs)
Spot LED/Fiber LED Lighting Department LED Fiber Strobe LFS Series-Part Number-LFS-15K-A-IR940

LFS-15K-A-IR940

Available upon quote - Manual dimming with analog volume
Dimming by external voltage signal (0~5V)
Approximately 25~100% 0~10kHz (Light emission time width is limited when over 100Hz) W122×H66×D204mm (excluding protrusions) External analog voltage signal dimming (0-5V) AC85~264V Between 1 and 990μs (set in 1μs increments between 1 and 99μs, and in 10μs increments between 10 and 990μs) 1.4kg 16W LS-HJ series LSA-SIG series S type K type (Light emission time set between 1~990μs)

Click on the part number for more information about each product

Customers who viewed this product also viewed

Other products of Nissin Electronics Industry Co., Ltd.


View more products of Nissin Electronics Industry Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree