Electric HDD/SSD physical destruction device high speed type storage puncher STPN-30-STPN-30-N

Electric HDD/SSD physical destruction device high speed type storage puncher STPN-30
Soho Co., Ltd.

Soho Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

3.8hours

Very Fast Response

About This Product

■For information leakage preventionThe Storage Puncher series is a device that safely and efficiently physically destroys recording media such as HDDs and SSDs, rendering the data unrecoverable. Since the state of destruction is visible, you can dispose of recording media with peace of mind.

■Summary・High-speed destruction in about 8 seconds
・Compatible with HDD with mounter
・Destruction tools can be replaced without tools, making it highly expandable.
・Small and lightweight (approximately 18 kg in weight) housing with excellent portability
・High cost performance as one unit can destroy various recording media
・Equipped with safety functions to prevent accidents
・12 tons of destructive force and unique mechanism to prevent discs from biting (patented)
- Obtained certificate of non-recoverable data from SGS

Features
■High-speed destruction in about 8 secondsIt is now possible to destroy at a higher speed than the conventional model.

■Destruction tools can be replaced without tools, making it highly expandable.Destruction tools can be replaced without using tools, and can destroy HDDs, SSDs, and various other media. It is cost-effective as there is no need to purchase multiple physical destruction devices. Additionally, you can reduce the amount of equipment you bring into the work site and improve work efficiency.

■Compatible with HDD with mounterWe developed this option in response to customer feedback such as, ``During on-site work, there is a limit to the amount of time we can spend in the server room, so even removing the mounter is a waste of time.'' HDDs can be destroyed with the mounter attached, increasing the efficiency of destruction work.

■12 tons of destructive force and unique mechanism to prevent discs from bitingThe recording medium is placed on a lifting table and raised using an electric hydraulic pump. The recording medium is pressed against the destruction tool fixed at the top of the main body with a powerful pressure of up to 12 tons. After destruction, the pusher plate uses the force of the spring to peel off the recording medium and destruction tool, preventing them from sticking together.

■The destruction hole goes through the back side.At a glance, you can see that the aluminum die-cast surface on the back of the HDD has been destroyed. This makes it easier to determine that recorded data is unreadable, and can be disposed of with peace of mind.

■Weight・Weight of main body only: Approx. 18kg
・HDD destruction tool + tray: approx. 1.3kg
・SSD destruction tool + tray: Approx. 1.5kg
・Tape destruction tool + tray: Approx. 1.3 kg
・HDD pouch with mounter + tray: Approx. 1.9 kg

Model
There are 5 models available for this product.

Product
Electric HDD/SSD physical destruction device high speed type storage puncher STPN-30

Handling Company
Soho Co., Ltd.

150+ people viewing

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

5 Models of Electric HDD/SSD physical destruction device high speed type storage puncher STPN-30

Click on the part number for more information about each product

Part Number	Price (excluding tax)	Country of manufacture	Product warranty	Operation sound during destruction	Destruction method	Power consumption	Maximum load	Operation button	Compatible recording media	Safety equipment	External dimensions	Number of simultaneous destruction	Operating humidity/storage humidity	Operating temperature/storage temperature	Pressure method	Input power	Model	Bit exchange	Display	Set item	Counter function	1 time destruction time	Accessories
STPN-30-N	Available upon quote	Japan	3 years	Approximately 70db~80db	-	Operating (average): 300W	12 tons	START button (menu selection) STOP button (menu selection)	-	Door open/close sensor (stops working when open) Tool/tray detection sensor (stops working when wrong tool and tray combination is used)	187 (W) × 289 (D) × 410 (H) mm	-	20%~80%/5%~95%	5℃~45℃/-20℃~55℃	Hydraulic	Power outlet: AC100V	Main body only	-	Monochrome 2×16 characters Japanese kana/English display	Main body only	Cumulative counter, job counter	Approximately 8 seconds	Power cable, Japanese manual, Phillips screwdriver, hex wrench set
STPN-30-H	Available upon quote	Japan	3 years	Approximately 70db~80db	Drill into the platter with 4 bits (can be changed to 2)	Operating (average): 300W	12 tons	START button (menu selection) STOP button (menu selection)	3.5 inch HDD/2.5 inch HDD (thickness: 26mm or less) Optical discs (CD/DVD/Blu-ray, 8cm/12cm), MO discs, floppy discs	Door open/close sensor (stops working when open) Tool/tray detection sensor (stops working when wrong tool and tray combination is used)	187 (W) × 289 (D) × 410 (H) mm	3.5 inch HDD: 1 unit 2.5 inch HDD: 2 units (up to 9mm thickness) Optical disc: 5 discs MO disk: 1 disk Floppy disk: 3 disks	20%~80%/5%~95%	5℃~45℃/-20℃~55℃	Hydraulic	Power outlet: AC100V	HDD destruction model	Possible	Monochrome 2×16 characters Japanese kana/English display	HDD destruction tool + tray (HDDU-03B)	Cumulative counter, job counter	Approximately 8 seconds	Power cable, Japanese manual, Phillips screwdriver, hex wrench set
STPN-30-S	Available upon quote	Japan	3 years	Approximately 70db~80db	Breaking the memory chips of the entire SSD with blades spaced at 5mm intervals	Operating (average): 300W	12 tons	START button (menu selection) STOP button (menu selection)	2.5 inch SSD, M.2 SSD, USB memory, SD card	Door open/close sensor (stops working when open) Tool/tray detection sensor (stops working when wrong tool and tray combination is used)	187 (W) × 289 (D) × 410 (H) mm	2.5 inch SSD: 1 M.2 SSD, USB memory, SD card: 1~6	20%~80%/5%~95%	5℃~45℃/-20℃~55℃	Hydraulic	Power outlet: AC100V	SSD destruction model	-	Monochrome 2×16 characters Japanese kana/English display	SSD destruction tool + tray (SSDU-03B)	Cumulative counter, job counter	Approximately 8 seconds	Power cable, Japanese manual, Phillips screwdriver, hex wrench set
STPN-30-HS	Available upon quote	Japan	3 years	Approximately 70db~80db	HDD: Drill the platter with 4 bits (can be changed to 2 bits) SSD: Break the memory chips of the entire SSD with blades spaced at 5mm intervals	Operating (average): 300W	12 tons	START button (menu selection) STOP button (menu selection)	HDD: 3.5 inch HDD/2.5 inch HDD (thickness: 26 mm or less), optical disc SSD: 2.5 inch SSD, M.2 SSD, USB memory, SD card, MO disk, floppy disk	Door open/close sensor (stops working when open) Tool/tray detection sensor (stops working when wrong tool and tray combination is used)	187 (W) × 289 (D) × 410 (H) mm	3.5 inch HDD/2.5 inch HDD, 2.5 inch SSD, MO disk, floppy disk: 1 M.2 SSD, USB memory, SD card: 1~6	20%~80%/5%~95%	5℃~45℃/-20℃~55℃	Hydraulic	Power outlet: AC100V	HDD/SSD destruction model	-	Monochrome 2×16 characters Japanese kana/English display	HDD destruction tool + tray (HDDU-03B) SSD destruction tool + tray (SSDU-03B)	Cumulative counter, job counter	Approximately 8 seconds	Power cable, Japanese manual, Phillips screwdriver, hex wrench set
STPN-30HP	Available upon quote	Japan	3 years	Approximately 70db~80db	Drill into the platter with 4 bits (can be changed to 2)	Operating (average): 300W	12 tons	START button (menu selection) STOP button (menu selection)	3.5 inch HDD/2.5 inch HDD (thickness: 26mm or less) Optical discs (CD/DVD/Blu-ray, 8cm/12cm), MO discs, floppy discs	Door open/close sensor (stops working when open) Tool/tray detection sensor (stops working when wrong tool and tray combination is used)	187 (W) × 289 (D) × 410 (H) mm	3.5 inch HDD: 1 unit 2.5 inch HDD: 2 units (up to 9mm thickness) Optical disc: 5 discs MO disk: 1 disk Floppy disk: 3 disks	20%~80%/5%~95%	5℃~45℃/-20℃~55℃	Hydraulic	Power outlet: AC100V	HDD destruction model with mounter	Possible	Monochrome 2×16 characters Japanese kana/English display	HDD destruction tool + tray with mounter (MPHTY-01B)	Cumulative counter, job counter	Approximately 8 seconds	Power cable, Japanese manual, Phillips screwdriver, hex wrench set

Click on the part number for more information about each product

Other products of Soho Co., Ltd.

Reviews shown here are reviews of companies.

Manual HDD/SSD physical destruction machine storage puncher HDPN-04A

Soho Co., Ltd.

180+ people viewing

Last viewed: 11 hours ago

Response time: 3.76 hours

4 models listed

Destruction certificate creation system STB-01

Soho Co., Ltd.

60+ people viewing

Response time: 3.76 hours

M.2 SSD data eraser JetEraser HDE-GM600

Soho Co., Ltd.

60+ people viewing

Last viewed: 9 seconds ago

Response time: 3.76 hours

HDD/SSD data erasure device SAS/SATA compatible JetEraser HDE-GT series

Soho Co., Ltd.

120+ people viewing

Last viewed: 14 hours ago

Response time: 3.76 hours

2 models listed

M.2/U.2 SSD duplicator/erase machine JetCopier HDC-BMHG series

Soho Co., Ltd.

130+ people viewing

Response time: 3.76 hours

4 models listed

M.2 SSD duplicator/erase machine JetCopier HDC-BMUG series

Soho Co., Ltd.

160+ people viewing

Last viewed: 23 hours ago

Response time: 3.76 hours

4 models listed

HDD/SSD duplicator/erase machine JetCopier HDC-MTUG-SAS series

Soho Co., Ltd.

110+ people viewing

Last viewed: 19 hours ago

Response time: 3.76 hours

2 models listed

M.2/SATA SSD duplicator/erase machine JetCopier HDC-PW series

Soho Co., Ltd.

110+ people viewing

Last viewed: 1 hour ago

Response time: 3.76 hours

3 models listed

M.2/SATA Duplicator/Erase Machine JetCopier HDC-PWH Series

Soho Co., Ltd.

110+ people viewing

Response time: 3.76 hours

3 models listed

USB memory duplicator/data eraser JetCopier UBC-3900 series

Soho Co., Ltd.

180+ people viewing

Response time: 3.76 hours

10 models listed

DVD Duplicator SharkCopier (DVD)

Soho Co., Ltd.

190+ people viewing

Last viewed: 6 hours ago

Response time: 3.76 hours

6 models listed

USB3.1 compatible USB memory duplicator UBC-3800B series

Soho Co., Ltd.

160+ people viewing

Response time: 3.76 hours

5 models listed

View more products of Soho Co., Ltd.

About Company Handling This Product

Soho Co., Ltd.

Response Rate

100.0%

Response Time

3.8hrs

Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Electric HDD/SSD physical destruction device high speed type storage puncher STPN-30 Soho Co., Ltd.

Soho Co., Ltd.'s Response Status

About This Product

■For information leakage prevention

■Summary

■High-speed destruction in about 8 seconds

■Destruction tools can be replaced without tools, making it highly expandable.

■Compatible with HDD with mounter

■12 tons of destructive force and unique mechanism to prevent discs from biting

■The destruction hole goes through the back side.

■Weight

5 Models of Electric HDD/SSD physical destruction device high speed type storage puncher STPN-30

STPN-30-N

STPN-30-H

STPN-30-S

STPN-30-HS

STPN-30HP

Other products of Soho Co., Ltd.

About Company Handling This Product

Electric HDD/SSD physical destruction device high speed type storage puncher STPN-30
Soho Co., Ltd.