Trimming automatic press machine SSD500-SFC-MKⅡ
Sekiguchi Manufacturing Co., Ltd.
About This Product
By interlocking the servo motor on the press side and the servo motor on the feeder side, products on multi-sided layout sheets can be punched with high precision while being fed at any specified pitch. It has the following features in terms of operation and control, using digital servo control using an AC servo motor and touch panel/manual pulse handle operation.
■Press department
The underdrive system has a highly rigid 4-column structure, making it a highly stable mechanism. Additionally, the top dead center, intermediate point, bottom dead center, and depth of cut can be easily set to any position in 0.1/0.01mm increments using the manual hand handle. A positioning pin (driven by an air cylinder) is installed in the mold, the press is stopped once at the pin protrusion position (midpoint), and the punching operation is performed after the pin is inserted securely, which prevents the product work from lifting up. Stable punching is possible.
The press can set the depth of cut two times in a row. In addition, the cutting speed can be selected from high or low, allowing a variety of continuous cutting settings.
■Feeder section
The pitch can be set arbitrarily. Also, if the data between pitches is the same, the repeat function can simplify input. It is also possible to set the positioning pin in and out, and make delicate settings while checking the sensor position.
Test operation is possible in data creation mode, so you can check the created data. You can also modify points.
-
Product
Trimming automatic press machine SSD500-SFC-MKⅡ
-
Handling Company
Sekiguchi Manufacturing Co., Ltd.
-
Categories
1 Models of Trimming automatic press machine SSD500-SFC-MKⅡ
| Product Image | Part Number | Price (excluding tax) | Feeder section AC servo motor | Feeder section Maximum number of position settings | Feeder section control air pressure | Feeder section drive method | Feeder section effective stroke | Feeder section positioning pin control: 0.8MPa | Feeder section positioning setting unit | Feeder section power supply | Feeder section supply air pressure | Press part AC servo motor | Press part Bolster part dimensions | Press part positioning setting unit | Press section machine dimensions | Press section machine weight | Press section maximum punching capacity | Press section maximum stroke length | Press section maximum stroke number |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
SSD500-SFC-MKⅡ |
Available upon quote | 0.05kW 3,000rpm |
16 pieces stored in the device |
Brake control: 0.5MPa | Ball screw drive by AC servo motor | 300mm | Using pressure booster valve | 0.01mm |
3φ 200/220V 50/60Hz 6kVA Voltage fluctuation ±10% or less |
0.5MPa or more Must be dust-proof and moisture-proof |
4kW 2,000rpm | Width 240mm x depth 160mm |
0.01mm/0.1mm Switch at any time |
Width 960mm x length 1,370mm x height 1,250mm | 1,100kg |
50kN (5ton) Maximum load duration 5 seconds or less |
90mm: When standard type is installed 160mm: between fixtures |
100spm Conditions: Stroke length 10mm |
Customers who viewed this product also viewed
Other products of Sekiguchi Manufacturing Co., Ltd.
View more products of Sekiguchi Manufacturing Co., Ltd.