All Categories
History
Product
Two-part sensor amplifier for atomic force microscope AFM MSC-1/MPR-1AHandling Company
Graviton Co., Ltd.| Image | Part Number | Price (excluding tax) | MSC-1 power supply voltage, current | MSC-1 Voltage display range, resolution | MSC-1 weight | MSC-1 difference signal output gain | MSC-1 external dimensions | MSC-1 quotient signal output gain | MSC-1 Sum signal output gain | MSC-1 output voltage display | MSC-1 output signal | MSC-1 output filter characteristics | MSC-1 output connector | MSC-1 output offset voltage | MSC-1 output impedance | MSC-1 Number of input channels | MSC-1 input connector | MSC-1 input impedance | MSC-1 PD-A, PD-B output gain | MSC-1 DC voltage output terminal | MPR-1 power supply voltage | MPR-1 Overall light receiving sensitivity | MPR-1 housing material | MPR-1 external dimensions | MPR-1 frequency band | MPR-1 Photodetector conversion sensitivity | MPR-1 Photodetector | MPR-1 number of output channels | MPR-1 output connector | MPR-1 output offset voltage | MPR-1 output impedance | MPR-1 transimpedance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
MSC-1/MPR-1A |
Available upon quote |
AC100V, 500mA or less |
Range ±4V, resolution 1mV |
Approximately 4.7kg |
Continuously variable from +14dB to +34dB |
Width 482.4mm, height 44mm, depth 260mm Height dimensions: not including rubber feet height 8mm. |
Continuously variable from +12dB to +32dB |
Continuously variable from -6dB to +14dB |
Five types: PD-A output voltage, PD-B output voltage, Sum output voltage, Subtract output voltage, Quotient output voltage |
PD-A, PD-B signal, Sum signal, Subtract signal, Quotient signal |
4th order Bessel low pass filter, 20MHz |
All 5 connectors are BNC receptacles |
±5mV or less |
All 5 signals are 50Ω |
2 channels |
SMA receptacle |
50Ω |
+6dB fixed |
Equipped with two ±8V DC output terminals, LEMO and ERA0S-4P on the rear panel |
±8V is standard. |
-4,600V/W (swings to the - side when receiving light) |
Exterior insulation structure made of PEEK material |
Width 80mm, depth 40mm, height 29mm. |
DC to 20MHz, ±1dB |
0.46A/W @658nm |
Silicon PIN photodetector |
2 channels |
SMA receptacle |
±1mV or less |
50Ω |
20kΩ |
Reviews shown here are reviews of companies.
