Motor control board USB compatible USPG-R series USPG-48R/IO-USPG-48R/IO

Motor control board USB compatible USPG-R series USPG-48R/IO
Cosmotex Co., Ltd.

About This Product

■SummaryThe USPG-48R/IO is a product with the general-purpose input/output board "IO-32/16" added to the USPG-48R. A high-performance motor controller equipped with the motor control LSI "PMC842SR" that enables up to 4-axis control, from standard axis control to interpolation control. External communication uses USB 2.0, and it can be operated on a desk or notebook PC.

USPG-48R is a successor product to USPG-48 (F) and can be replaced with some limitations.

■Features・A motor controller whose basic functions are linear/S-curve acceleration/deceleration and interpolation control.
・By applying interpolation control, complex mechanical mechanisms such as gantry control and light landing functions can be controlled.
- Equipped with an API mode that consolidates control functions as a new function, which contributes to reducing development man-hours more than the conventional control mode.
・You can use the source collection "SampleGUI" that can be used in actual operation for device applications.
・The USPG-R series can operate 3 models in the series with the same software.
- We have prepared a compatibility mode (software) as a successor product to USPG-48 (F). (When operating in compatibility mode, there may be specification changes in the software.)

■Equipped with new function “API mode”1.Light landing function
This function uses 2-axis interpolation control, making it possible to change the speed just before stopping to minimize impact on the workpiece. This can be achieved with a relatively simple configuration of about 2 steps (provided by SampleGUI).

2. Timing output function
This is a timing output function using an interpolation table. General-purpose output can be managed according to location information, so it can be used as a trigger for camera shooting or other operations.

3. Arch motion
We have prepared a sample source (SampleGUI) for arch motion instead of continuous interpolation. It can be applied to coating control, vertical movement, etc.

4. Gantry function
Gantry control using interpolation control. Since it has been converted into a sample function (SampleGUI) in advance, it is an environment that can be used with only operation parameters.

■Accessories・Power connector VHR-2N (JST)
・Contact for power connector SVH-41T-P1.1 (JST)

Model
There are 1 models for this product.

Product
Motor control board USB compatible USPG-R series USPG-48R/IO

Handling Company
Cosmotex Co., Ltd.

Categories

Controllers

Motion Controllers

Controllers

Motor Controllers

140+ people viewing

Last viewed: 17 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Motor control board USB compatible USPG-R series USPG-48R/IO

Image	Part Number	Price (excluding tax)	Interpolation drive	Deceleration pulse setting	Rated power supply voltage/current consumption	Rating Compatible standards	Rating Dimensions/Weight	Ratings Operating ambient temperature/humidity	Rating Interface	Operating environment Recommended language	Operating environment Recommended OS	Acceleration/deceleration function	Number of control axes	Output frequency/reference clock	Output signal function General-purpose output (IO-32/16)	Output signal function Control output	Output signal function Output current / withstand voltage (general purpose output)	Output signal function Output current / withstand voltage (control output)	Input signal function General-purpose input (IO-32/16)	Input signal function Control input	Input signal function Input current/voltage (general purpose input)	Input signal function Input current/voltage (control input)	Pulse output method	Pulse counter function Output pulse counter	Drive function	Override
	USPG-48R/IO	Available upon quote	Straight line / arc / continuous interpolation / arch motion / gantry	Automatic calculation/numeric specification	DC+24V±10% / Max.110mA	Compatible with RoHS10 substances	WDH: 134 x 94 x 30mm (excluding connector and mounting hardware) / 155g	0~45℃ / 10~80%RH	USB Rev.2.0 Full Speed	Visual Studio	Windows 10 (32bit / 64bit compatible) or later	Straight line/S-curve acceleration/deceleration (compatible with asymmetrical acceleration/deceleration)	4 axes (PMC842SR x 1)	8.191Mpps/32.768MHz	16 outputs via photocoupler	8 open collector outputs using photocouplers (2 points for each axis) Servo-on ⁄ Can be used as driver reset or general-purpose output	Max.50mA / Max.30V	Max.50mA / Max.30V	Input via photocoupler 32 points	28 inputs via photocoupler (7 points for each axis) ・+Limit signal ⁄ -Limit signal / Origin signal / Positioning completion signal / Driver error signal ・General-purpose input (2 points for each axis) 1 emergency stop signal (common to 4 axes)	2~4mA / 0V~ / DC+24V±10%	2~4mA / 0V~ / DC+24V±10%	1 pulse method (DIR / PULSE) / 2 pulse method (CW / CCW) / 2-phase pulse method (A phase / B phase)	32bit output pulse counter Comparator/Prescaler	Positioning ⁄ Continuous ⁄ Signal detection ⁄ Synchronous start	Speed change/travel amount change (can be changed during operation)

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Motion Controller E-TD series

Higashi -Saka Electronic Equipment Co., Ltd.

460+ people viewing

Last viewed: 5 hours ago

Response time: 24.27 hours

Motion Controllers

4 models listed

Motion controller EPI-01

Higashi -Saka Electronic Equipment Co., Ltd.

410+ people viewing

Last viewed: 5 hours ago

Response time: 24.27 hours

Motion Controllers

Realize low vibration in a wide range of speeds Motion controllers EPI-06

Higashi -Saka Electronic Equipment Co., Ltd.

280+ people viewing

Last viewed: 5 hours ago

Response time: 24.27 hours

Motion Controllers

MCX501 -High -performance 1 -axis motion control IC

NOVA Electronics, Inc.

$16.25

300+ people viewing

Last viewed: 17 hours ago

Motion Controllers

3 models listed

One-board motion controller SLM8000

Techno Co., Ltd.

240+ people viewing

Motion Controllers

4 models listed

Ethernet connection Up to 8 axes pulse train output Motion controller InterMotion JOY-AM8-WB

Prime Motion Co., Ltd.

90+ people viewing

Last viewed: 3 hours ago

Motion Controllers

PMAC motion controller New Ideas in Motion

PMAC System Sales Co., Ltd.

90+ people viewing

Last viewed: 4 hours ago

Motion Controllers

2 models listed

Motor control LSI PMC-R series PMC620R

Cosmotex Co., Ltd.

210+ people viewing

Last viewed: 9 hours ago

Motion Controllers

3 models listed

Serial Controllers Serial communication type positioning controller SC BSC

Dynax Co., Ltd.

90+ people viewing

Motion Controllers

Highest performance motion controller DMC-4000 series

Koen Co., Ltd.

300+ people viewing

Last viewed: 4 hours ago

Motion Controllers

8 models listed

Motion control PCI Express connection product HPCIe-CPD632

Hivertec Co., Ltd.

50+ people viewing

Motion Controllers

2 models listed

MCX512 -High -performance 2 -axis motion control IC

NOVA Electronics, Inc.

$35.75

310+ people viewing

Last viewed: 2 hours ago

Motion Controllers

See More Motion Controllers Products

Other products of Cosmotex Co., Ltd.

Reviews shown here are reviews of companies.

Motor control LSI PMC-R series PMC620R

Cosmotex Co., Ltd.

210+ people viewing

Last viewed: 9 hours ago

Application-Specific Integrated Circuits (ASIC)

3 models listed

Motor control LSI PMC-R series PMC820SR

Cosmotex Co., Ltd.

170+ people viewing

Motion Controllers

2 models listed

Motor control LSI PMC-R series PMC842SR

Cosmotex Co., Ltd.

180+ people viewing

Motion Controllers

2 models listed

Motor control board USB compatible USPG-R series USPG-28R

Cosmotex Co., Ltd.

150+ people viewing

Motion Controllers

2 models listed

Motor control board USB compatible USPG-R series USPG-48R

Cosmotex Co., Ltd.

140+ people viewing

Last viewed: 13 hours ago

Motion Controllers

2 models listed

Motor control board USB compatible USPG-R series USPG-48HR

Cosmotex Co., Ltd.

160+ people viewing

Motion Controllers

2 models listed

Motor control board USB compatible USPG-R series USPG-48HR/IO

Cosmotex Co., Ltd.

120+ people viewing

Last viewed: 17 minutes ago

Motion Controllers

2 models listed

Motor control board Embedded/standalone compatible EX series EX-CPU

Cosmotex Co., Ltd.

110+ people viewing

Motion Controllers

2 models listed

Motor control board Embedded/standalone compatible EX series EX-PG4

Cosmotex Co., Ltd.

170+ people viewing

Motion Controllers

2 models listed

Fieldbus motion RealtimeExpress controller CSRC-32CN-RP

Cosmotex Co., Ltd.

110+ people viewing

Motion Controllers

2 models listed

Fieldbus motion RealtimeExpress module CTDR-0514NS-4LS

Cosmotex Co., Ltd.

100+ people viewing

Motion Controllers

2 models listed

Fieldbus motion RealtimeExpress module CTTO-04NS

Cosmotex Co., Ltd.

170+ people viewing

Motion Controllers

2 models listed

View more products of Cosmotex Co., Ltd.

About Company Handling This Product

Cosmotex Co., Ltd.

Japan

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Motor control board USB compatible USPG-R series USPG-48R/IO Cosmotex Co., Ltd.

About This Product

■Summary

■Features

■Equipped with new function “API mode”

■Accessories

1 Models of Motor control board USB compatible USPG-R series USPG-48R/IO

USPG-48R/IO

Customers who viewed this product also viewed

Other products of Cosmotex Co., Ltd.

About Company Handling This Product

Related search keywords

Motor control board USB compatible USPG-R series USPG-48R/IO
Cosmotex Co., Ltd.