Industrial radio Esty Telecon two-way communication PB type-KWC811G

Industrial radio Esty Telecon two-way communication PB type
Kinryo Electric Co., Ltd.

About This Product

ST Telecon (ST Telecon) is a teleconverter that allows two-way communication. Bidirectional communication allows various information to be displayed at hand, contributing to improved safety, workability, and maintainability. Wireless operation provides outstanding operability and safety in work environments that require a high level of safety or when operating equipment that requires complex operations.

It is used not only in large overhead cranes, large hoists, jib cranes, etc. used in heavy and long industries, but also in equipment and facilities other than cranes that require safe wireless operation, such as heavy construction equipment and transportation vehicles. .

■Characteristics of Esty Telecon・Two-way communication
・Auto power off
・Start-up status confirmation function
・Reception level display
・Narrowband compatible (when using 1.2GHz specified low power)
・Error correction
・Dustproof/waterproof (IP65) structure
・Input/output switching setting function
・Information display function

Features of PB type
■Push button switch- The operation switch uses a special switch developed for teleconverters. Using a highly reliable micro switch that is not affected by magnetism, it has a long lifespan and durability that can be operated over 1 million times.
・With flexible customization, we can create operation name plates on switches and change the number of operation points, types, and switch arrangement according to customer requests.

PB type commitment
■Case guard protector- Adopts highly durable elastomer case guard protectors on the four corners. By protecting the main unit from impact, we have reduced the frequency of failures and improved safety.
・It has a structure that can be easily removed by loosening the fixing screw. Even if it becomes worn or damaged, it can be easily replaced.

■Operation circuit-Equipped with a main power-on interlock function that prevents the main power from turning on if the specified operation signal is ON when the power is turned on.
- Equipped with a forward/reverse interlock function that prevents both outputs when contradictory operations are performed at the same time (simultaneous ascending and descending operations, etc.).
- For each operation switch, prepare a signal that turns ON when it is operated and a signal that turns ON when it is not operated (zero signal), and if two signals are received at the same time, it will be considered abnormal and the output will be cut off. It has a safe design.

■Maintenance-Each unit is equipped with a self-diagnosis indicator light, so even in the event of a failure, recovery can be easily done by replacing the unit.
-Uses a mini control relay with an operation indicator lamp, making it easy to understand the operating status.

Model
There are 5 models available for this product.

Product
Industrial radio Esty Telecon two-way communication PB type

Handling Company
Kinryo Electric Co., Ltd.

Categories

Controllers

Wireless Remote Controllers

350+ people viewing

Last viewed: 13 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

5 Models of Industrial radio Esty Telecon two-way communication PB type

Click on the part number for more information about each product

Part Number	Price (excluding tax)	Long distance *Varies depending on usage conditions.	Product composition	Mobile terminal power supply	Mobile terminal continuous usage time	Mobile terminal operation switch (standard)	Mobile terminal external dimensions	Mobile terminal protection class	Mobile terminal operating temperature and humidity range	Mobile terminal number of transmission points	Wireless station type	Radio frequency	Equipment address	Response time When error correction function is disabled	Response time When error correction function is enabled	Fixed terminal equipment power supply	Fixed terminal equipment Shock resistance	Fixed terminal equipment Vibration resistance	Fixed terminal equipment inrush current	Fixed terminal device external dimensions	Fixed terminal device output	Fixed terminal device input	Fixed terminal equipment signal output specifications	Fixed terminal equipment protection class	Fixed terminal device operating temperature and humidity range	Number of channels	Number of channels Multiplication setting
KWC811G	Available upon quote	Approximately 100m	Set product (fixed terminal/mobile terminal)	Ni-MH battery 4.8V 1650mAh	Fully charged: 8 hours or more (Varies depending on usage conditions such as battery condition and temperature)	13 push button switches + 1 emergency stop When expanding: 7 switches added	W280×H115×D114mm (excluding protrusions) Approximately 1.49kg (including battery, excluding belt)	IP65 (dustproof/waterproof)	-10℃~+60℃, 85%RH or less (no condensation)	Input/output switching: Maximum 48 points (input/output switching every 8 points) Fixed output: max. 8 points	429MHz band specified low power radio station	429.2500~429.7375MHz (10mW or less)	16 bit	Unidirectional communication: approx. 30ms, bidirectional communication: approx. 90ms *If there is no wireless communication error. Does not include relay operating time.	Unidirectional communication: approx. 50ms, bidirectional communication: approx. 130ms *If there is no wireless communication error. Does not include relay operating time.	AC100~240V 50~60Hz 100VA or less (when 24 relays are ON)	294m/s2 (30G), half sine wave, action time 11ms, 3 times each in 3 directions, excluding relays	29.4m/s2 (3G), 10~55Hz, logarithmic sweep, 15 minutes in 3 directions, excluding relays	100V/200V 30Atyp/60Atyp 5ms or less	W360×H605×D215mm (excluding protrusions), 20kg or less	Rated current 5A	Coil voltage: DC24V (with surge absorption diode), coil resistance: 650Ω	Relay used: HH53P-FL-DC24V (Fuji Electric) *Please carefully check the relay manufacturer's specifications and use the relay with allowances for the ratings and performance.	IP40	-10℃~+60℃, 85%RH or less (no condensation)	40 channels	-
KWC811J	Available upon quote	Approximately 100m (10mW specification)	Set product (fixed terminal/mobile terminal)	Ni-MH battery 4.8V 1650mAh	Fully charged: 8 hours or more (Varies depending on usage conditions such as battery condition and temperature)	13 push button switches + 1 emergency stop When expanding: 7 switches added	W280×H115×D114mm (excluding protrusions) Approximately 1.49kg (including battery, excluding belt)	IP65 (dustproof/waterproof)	-10℃~+60℃, 85%RH or less (no condensation)	Input/output switching: Maximum 48 points (input/output switching every 8 points) Fixed output: max. 8 points	1,216MHz band specified low power radio station	(A band) 1,216.03125~1,216.5000MHz (10mW or less) Multiplication setting: (A band) 1,216.53125~1,217.0000MHz (0.8mW or less)	16 bit	Unidirectional communication: approx. 30ms, bidirectional communication: approx. 90ms *If there is no wireless communication error. Does not include relay operating time.	Unidirectional communication: approx. 50ms, bidirectional communication: approx. 130ms *If there is no wireless communication error. Does not include relay operating time.	AC100~240V 50~60Hz 100VA or less (when 24 relays are ON)	294m/s2 (30G), half sine wave, action time 11ms, 3 times each in 3 directions, excluding relays	29.4m/s2 (3G), 10~55Hz, logarithmic sweep, 15 minutes in 3 directions, excluding relays	100V/200V 30Atyp/60Atyp 5ms or less	W360×H605×D215mm (excluding protrusions), 20kg or less	Rated current 5A	Coil voltage: DC24V (with surge absorption diode), coil resistance: 650Ω	Relay used: HH53P-FL-DC24V (Fuji Electric) *Please carefully check the relay manufacturer's specifications and use the relay with allowances for the ratings and performance.	IP40	-10℃~+60℃, 85%RH or less (no condensation)	50kHz: 10 channels 25kHz: 19 channels 12.5kHz: 38 channels Total: 67 channels	50kHz: 20 channels 25kHz: 38 channels 12.5kHz: 76 channels Total: 134 channels
KWC811K	Available upon quote	Approximately 100m (10mW specification)	Set product (fixed terminal/mobile terminal)	Ni-MH battery 4.8V 1650mAh	Fully charged: 8 hours or more (Varies depending on usage conditions such as battery condition and temperature)	13 push button switches + 1 emergency stop When expanding: 7 switches added	W280×H115×D114mm (excluding protrusions) Approximately 1.49kg (including battery, excluding belt)	IP65 (dustproof/waterproof)	-10℃~+60℃, 85%RH or less (no condensation)	Input/output switching: Maximum 48 points (input/output switching every 8 points) Fixed output: max. 8 points	1,252MHz band specified low power radio station	(B band) 1,252.03125~1,252.5000MHz (10mW or less) Multiplication setting: (B band) 1,252.53125~1,253.0000MHz (0.8mW or less)	16 bit	Unidirectional communication: approx. 30ms, bidirectional communication: approx. 90ms *If there is no wireless communication error. Does not include relay operating time.	Unidirectional communication: approx. 50ms, bidirectional communication: approx. 130ms *If there is no wireless communication error. Does not include relay operating time.	AC100~240V 50~60Hz 100VA or less (when 24 relays are ON)	294m/s2 (30G), half sine wave, action time 11ms, 3 times each in 3 directions, excluding relays	29.4m/s2 (3G), 10~55Hz, logarithmic sweep, 15 minutes in 3 directions, excluding relays	100V/200V 30Atyp/60Atyp 5ms or less	W360×H605×D215mm (excluding protrusions), 20kg or less	Rated current 5A	Coil voltage: DC24V (with surge absorption diode), coil resistance: 650Ω	Relay used: HH53P-FL-DC24V (Fuji Electric) *Please carefully check the relay manufacturer's specifications and use the relay with allowances for the ratings and performance.	IP40	-10℃~+60℃, 85%RH or less (no condensation)	50kHz: 10 channels 25kHz: 19 channels 12.5kHz: 38 channels Total: 67 channels	50kHz: 20 channels 25kHz: 38 channels 12.5kHz: 76 channels Total: 134 channels
KWC811C	Available upon quote	Approximately 60m	Set product (fixed terminal/mobile terminal)	Ni-MH battery 4.8V 1650mAh	Fully charged: 8 hours or more (Varies depending on usage conditions such as battery condition and temperature)	13 push button switches + 1 emergency stop When expanding: 7 switches added	W280×H115×D114mm (excluding protrusions) Approximately 1.49kg (including battery, excluding belt)	IP65 (dustproof/waterproof)	-10℃~+60℃, 85%RH or less (no condensation)	Input/output switching: Maximum 48 points (input/output switching every 8 points) Fixed output: max. 8 points	290MHz band weak radio station	290.000~294.975MHz (500μV/m or less at 3m)	16 bit	Unidirectional communication: approx. 30ms, bidirectional communication: approx. 90ms *If there is no wireless communication error. Does not include relay operating time.	Unidirectional communication: approx. 50ms, bidirectional communication: approx. 130ms *If there is no wireless communication error. Does not include relay operating time.	AC100~240V 50~60Hz 100VA or less (when 24 relays are ON)	294m/s2 (30G), half sine wave, action time 11ms, 3 times each in 3 directions, excluding relays	29.4m/s2 (3G), 10~55Hz, logarithmic sweep, 15 minutes in 3 directions, excluding relays	100V/200V 30Atyp/60Atyp 5ms or less	W360×H605×D215mm (excluding protrusions), 20kg or less	Rated current 5A	Coil voltage: DC24V (with surge absorption diode), coil resistance: 650Ω	Relay used: HH53P-FL-DC24V (Fuji Electric) *Please carefully check the relay manufacturer's specifications and use the relay with allowances for the ratings and performance.	IP40	-10℃~+60℃, 85%RH or less (no condensation)	200 channels	-
KWC811D	Available upon quote	Approximately 60m	Set product (fixed terminal/mobile terminal)	Ni-MH battery 4.8V 1650mAh	Fully charged: 8 hours or more (Varies depending on usage conditions such as battery condition and temperature)	13 push button switches + 1 emergency stop When expanding: 7 switches added	W280×H115×D114mm (excluding protrusions) Approximately 1.49kg (including battery, excluding belt)	IP65 (dustproof/waterproof)	-10℃~+60℃, 85%RH or less (no condensation)	Input/output switching: Maximum 48 points (input/output switching every 8 points) Fixed output: max. 8 points	295MHz band weak radio station	295.000~295.975MHz (500μV/m or less at 3m)	16 bit	Unidirectional communication: approx. 30ms, bidirectional communication: approx. 90ms *If there is no wireless communication error. Does not include relay operating time.	Unidirectional communication: approx. 50ms, bidirectional communication: approx. 130ms *If there is no wireless communication error. Does not include relay operating time.	AC100~240V 50~60Hz 100VA or less (when 24 relays are ON)	294m/s2 (30G), half sine wave, action time 11ms, 3 times each in 3 directions, excluding relays	29.4m/s2 (3G), 10~55Hz, logarithmic sweep, 15 minutes in 3 directions, excluding relays	100V/200V 30Atyp/60Atyp 5ms or less	W360×H605×D215mm (excluding protrusions), 20kg or less	Rated current 5A	Coil voltage: DC24V (with surge absorption diode), coil resistance: 650Ω	Relay used: HH53P-FL-DC24V (Fuji Electric) *Please carefully check the relay manufacturer's specifications and use the relay with allowances for the ratings and performance.	IP40	-10℃~+60℃, 85%RH or less (no condensation)	197 channels	-

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Radio control device (propo) 2.4GHz radio telemetry transmitter/receiver set S00056

TKK Works Co., Ltd.

220+ people viewing

Last viewed: 2 hours ago

Response time: 17.41 hours

Wireless Remote Controllers

4 models listed

Multi-protocol Ethernet compatible block type remote I/O Remote I/O compatible with field logic controller function TBEN-L series

NC Automation Co., Ltd.

4.8

160+ people viewing

Last viewed: 4 hours ago

Response time: 15.46 hours

Wireless Remote Controllers

3 models listed

Industrial radio Esty Telecon two-way communication UVH type

Kinryo Electric Co., Ltd.

320+ people viewing

Last viewed: 17 hours ago

Wireless Remote Controllers

15 models listed

429MHz band unidirectional remote control unit TS02ENH series

Nomura Engineering Co., Ltd.

330+ people viewing

Response time: 28.35 hours

Wireless Remote Controllers

2 models listed

Multi-protocol Ethernet compatible block type remote I/O Remote I/O compatible with field logic controller function TBEN-S series

NC Automation Co., Ltd.

4.8

120+ people viewing

Last viewed: 4 hours ago

Response time: 15.46 hours

Wireless Remote Controllers

3 models listed

Multi-protocol Ethernet compatible block type remote I/O Remote I/O compatible with field logic controller function FEN20 series

NC Automation Co., Ltd.

4.8

120+ people viewing

Response time: 15.46 hours

Wireless Remote Controllers

3 models listed

Industrial radio Handy S Teleconverter

Kinryo Electric Co., Ltd.

280+ people viewing

Wireless Remote Controllers

4 models listed

Industrial Radio Pocket Bee Teleconverter

Kinryo Electric Co., Ltd.

230+ people viewing

Last viewed: 2 minutes ago

Wireless Remote Controllers

IP67 compatible block type remote I/O compact remote I/O TBEN-L series digital I/O

NC Automation Co., Ltd.

4.8

150+ people viewing

Last viewed: 3 hours ago

Response time: 15.46 hours

Wireless Remote Controllers

3 models listed

Wireless application product 920MHz band wireless remote control RC-920SET

Interplan Co., Ltd.

$32.50

220+ people viewing

Last viewed: 2 minutes ago

Wireless Remote Controllers

2 models listed

Industrial radio Handy RⅡ Teleconverter

Kinryo Electric Co., Ltd.

610+ people viewing

Wireless Remote Controllers

8 models listed

IP67 compatible block type remote I/O compact remote I/O TBEN-L series I/O-Link master 8 ports

NC Automation Co., Ltd.

4.8

130+ people viewing

Last viewed: 4 hours ago

Response time: 15.46 hours

Wireless Remote Controllers

3 models listed

See More Wireless Remote Controllers Products

Other products of Kinryo Electric Co., Ltd.

Reviews shown here are reviews of companies.

Industrial radio Esty Telecon two-way communication UVH type

Kinryo Electric Co., Ltd.

320+ people viewing

Last viewed: 17 hours ago

Radio Remote Controls

15 models listed

Industrial radio Handy S Teleconverter

Kinryo Electric Co., Ltd.

280+ people viewing

Wireless Remote Controllers

4 models listed

Industrial Radio Pocket Bee Teleconverter

Kinryo Electric Co., Ltd.

230+ people viewing

Last viewed: 2 minutes ago

Wireless Remote Controllers

Industrial radio Handy RⅡ Teleconverter

Kinryo Electric Co., Ltd.

610+ people viewing

Wireless Remote Controllers

8 models listed

Industrial radio FIX16 teleconverter

Kinryo Electric Co., Ltd.

410+ people viewing

Last viewed: 10 hours ago

Wireless Remote Controllers

4 models listed

Industrial radio FIX32 teleconverter

Kinryo Electric Co., Ltd.

280+ people viewing

Last viewed: 1 minute ago

Wireless Remote Controllers

3 models listed

View more products of Kinryo Electric Co., Ltd.

About Company Handling This Product

Kinryo Electric Co., Ltd.

Japan

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Industrial radio Esty Telecon two-way communication PB type Kinryo Electric Co., Ltd.

About This Product

■Characteristics of Esty Telecon

■Push button switch

■Case guard protector

■Operation circuit

■Maintenance

5 Models of Industrial radio Esty Telecon two-way communication PB type

KWC811G

KWC811J

KWC811K

KWC811C

KWC811D

Customers who viewed this product also viewed

Other products of Kinryo Electric Co., Ltd.

About Company Handling This Product

Related search keywords

Industrial radio Esty Telecon two-way communication PB type
Kinryo Electric Co., Ltd.