All Categories
History
Response Rate
100.0%
Response Time
84.1hours
Product
Roberval type load cell for scales - for low capacity scales (BCL)Handling Company
Sanyu Electronics Industry Co., Ltd.Categories
Click on the part number for more information about each product
| Image | Part Number | Price (excluding tax) | Nonlinearity | Temperature effect at zero point | Zero balance | Limit overload | Material of strain body | Mass | Error | Allowable overload | Allowable temperature range | Repeatability | Insulation resistance (Bridge-Body) | Loading surface size | Center of cumulative surface | Temperature compensation range | Maximum applied voltage | Recommended applied voltage | Rated capacity (R.C.) | Rated displacement | Rated output (R.O.) | Natural frequency | Output resistance | Temperature effect on output | Input resistance | Protection class | Hysteresis | Cable specifications | Creep recovery | Creep |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
BCL-300GM-A |
Available upon quote |
0,02%R.O. |
0.04%R.O./10℃ |
±0.04mV/V |
200%R.C. |
AL alloy |
Approximately 40g |
Load 1/2 of the rated load at an eccentric position of 50 mm, and within ±0.02% R.O. |
150%R.C. |
-10℃to50℃ |
0,02%R.O. |
2,000MΩ or more (DC50V) |
Maximum 200mm x 200mm |
Make sure that the center of the loading surface and the center of the load cell match. |
-10℃to50℃ |
15V |
10V or less |
2.942N (300gf) |
- |
1.6mV/V±0.2mV/V |
- |
350±5Ω |
0.02%LOAD/10℃ |
420+30-20Ω |
IP40 |
0,02%R.O. |
Φ3.2 4-core shielded 40cm direct connection |
0,02%R.O./20min |
0,02%R.O./20min |
|
|
BCL-600GM-A |
Available upon quote |
0,02%R.O. |
0.04%R.O./10℃ |
±0.04mV/V |
200%R.C. |
AL alloy |
Approximately 40g |
Load 1/2 of the rated load at an eccentric position of 50 mm, and within ±0.02% R.O. |
150%R.C. |
-10℃to50℃ |
0,02%R.O. |
2,000MΩ or more (DC50V) |
Maximum 200mm x 200mm |
Make sure that the center of the loading surface and the center of the load cell match. |
-10℃to50℃ |
15V |
10V or less |
5.884N (600gf) |
- |
1.6mV/V±0.2mV/V |
- |
350±5Ω |
0.02%LOAD/10℃ |
420+30-20Ω |
IP40 |
0,02%R.O. |
Φ3.2 4-core shielded 40cm direct connection |
0,02%R.O./20min |
0,02%R.O./20min |
|
|
BCL-1.2K-A |
Available upon quote |
0,02%R.O. |
0.04%R.O./10℃ |
±0.04mV/V |
200%R.C. |
AL alloy |
Approximately 40g |
Loading 1/2 of the rated load with an offset of 75 mm, within ±0.02% R.O. |
150%R.C. |
-10℃to50℃ |
0,02%R.O. |
2,000MΩ or more (DC50V) |
Maximum 300mm x 300mm |
Make sure that the center of the loading surface and the center of the load cell match. |
-10℃to50℃ |
15V |
10V or less |
11.77N (1.2kgf) |
- |
1.6mV/V±0.2mV/V |
- |
350±5Ω |
0.02%LOAD/10℃ |
420+30-20Ω |
IP40 |
0,02%R.O. |
Φ3.2 4-core shielded 40cm direct connection |
0,02%R.O./20min |
0,02%R.O./20min |
|
|
BCL-1.5K-A |
Available upon quote |
0,02%R.O. |
0.04%R.O./10℃ |
±0.04mV/V |
200%R.C. |
AL alloy |
Approximately 40g |
Loading 1/2 of the rated load with an offset of 75 mm, within ±0.02% R.O. |
150%R.C. |
-10℃to50℃ |
0,02%R.O. |
2,000MΩ or more (DC50V) |
Maximum 300mm x 300mm |
Make sure that the center of the loading surface and the center of the load cell match. |
-10℃to50℃ |
15V |
10V or less |
14.71N (1.5kgf) |
- |
1.6mV/V±0.2mV/V |
- |
350±5Ω |
0.02%LOAD/10℃ |
420+30-20Ω |
IP40 |
0,02%R.O. |
Φ3.2 4-core shielded 40cm direct connection |
0,02%R.O./20min |
0,02%R.O./20min |
|
|
BCL-3K-A |
Available upon quote |
0,02%R.O. |
0.04%R.O./10℃ |
±0.04mV/V |
200%R.C. |
AL alloy |
Approximately 40g |
Loading 1/2 of the rated load with an offset of 75 mm, within ±0.02% R.O. |
150%R.C. |
-10℃to50℃ |
0,02%R.O. |
2,000MΩ or more (DC50V) |
Maximum 300mm x 300mm |
Make sure that the center of the loading surface and the center of the load cell match. |
-10℃to50℃ |
15V |
10V or less |
29.42N (3kgf) |
- |
1.6mV/V±0.2mV/V |
- |
350±5Ω |
0.02%LOAD/10℃ |
420+30-20Ω |
IP40 |
0,02%R.O. |
Φ3.2 4-core shielded 40cm direct connection |
0,02%R.O./20min |
0,02%R.O./20min |
|
|
BCL-4.5K-A |
Available upon quote |
0,02%R.O. |
0.04%R.O./10℃ |
±0.04mV/V |
200%R.C. |
AL alloy |
Approximately 40g |
Loading 1/2 of the rated load with an offset of 75 mm, within ±0.02% R.O. |
150%R.C. |
-10℃to50℃ |
0,02%R.O. |
2,000MΩ or more (DC50V) |
Maximum 300mm x 300mm |
Make sure that the center of the loading surface and the center of the load cell match. |
-10℃to50℃ |
15V |
10V or less |
44.13N (4.5kgf) |
- |
1.6mV/V±0.2mV/V |
- |
350±5Ω |
0.02%LOAD/10℃ |
420+30-20Ω |
IP40 |
0,02%R.O. |
Φ3.2 4-core shielded 40cm direct connection |
0,02%R.O./20min |
0,02%R.O./20min |
|
|
BCL-300GM-C3 |
Available upon quote |
0,015%R.O. |
0.014%R.O./10℃ |
±0.04mV/V |
300%R.C. |
Aluminum alloy |
Approximately 70g |
Loading 1/2 of the rated capacity at an eccentric position of 50 mm, within ±0.02% R.O. |
200%R.C. |
-10℃to40℃ |
0,010%R.O. |
2,000MΩ or more (DC50V) |
Maximum 200mm x 200mm |
Make sure that the center of the loading surface and the center of the load cell match. |
-10℃to40℃ |
15V |
10V or less |
300g |
0.25mm |
0.9mV/V±0.1mV/V |
80Hz |
350±5Ω |
0.012%LOAD/10℃ |
420+30-20Ω |
IP40 |
0,015%R.O. |
Φ3.2 40cm with 4-core shield |
0,016%R.O./30min |
0,016%R.O./30min |
|
|
BCL-600GM-C3 |
Available upon quote |
0,015%R.O. |
0.014%R.O./10℃ |
±0.04mV/V |
300%R.C. |
Aluminum alloy |
Approximately 70g |
Loading 1/2 of the rated capacity at an eccentric position of 50 mm, within ±0.02% R.O. |
200%R.C. |
-10℃to40℃ |
0,010%R.O. |
2,000MΩ or more (DC50V) |
Maximum 200mm x 200mm |
Make sure that the center of the loading surface and the center of the load cell match. |
-10℃to40℃ |
15V |
10V or less |
600g |
0.25mm |
0.9mV/V±0.1mV/V |
100Hz |
350±5Ω |
0.012%LOAD/10℃ |
420+30-20Ω |
IP40 |
0,015%R.O. |
Φ3.2 40cm with 4-core shield |
0,016%R.O./30min |
0,016%R.O./30min |
|
|
BCL-1.2K-C3 |
Available upon quote |
0,015%R.O. |
0.014%R.O./10℃ |
±0.04mV/V |
300%R.C. |
Aluminum alloy |
Approximately 70g |
Loading 1/2 of the rated capacity with an offset of 75 mm, within ±0.02% R.O. |
200%R.C. |
-10℃to40℃ |
0,010%R.O. |
2,000MΩ or more (DC50V) |
Maximum 300mm x 300mm |
Make sure that the center of the loading surface and the center of the load cell match. |
-10℃to40℃ |
15V |
10V or less |
1.2kg |
0.25mm |
0.9mV/V±0.1mV/V |
200Hz |
350±5Ω |
0.012%LOAD/10℃ |
420+30-20Ω |
IP40 |
0,015%R.O. |
Φ3.2 40cm with 4-core shield |
0,016%R.O./30min |
0,016%R.O./30min |
|
|
BCL-1.5K-C3 |
Available upon quote |
0,015%R.O. |
0.014%R.O./10℃ |
±0.04mV/V |
300%R.C. |
Aluminum alloy |
Approximately 70g |
Loading 1/2 of the rated capacity with an offset of 75 mm, within ±0.02% R.O. |
200%R.C. |
-10℃to40℃ |
0,010%R.O. |
2,000MΩ or more (DC50V) |
Maximum 300mm x 300mm |
Make sure that the center of the loading surface and the center of the load cell match. |
-10℃to40℃ |
15V |
10V or less |
1.5kg |
0.25mm |
0.9mV/V±0.1mV/V |
210Hz |
350±5Ω |
0.012%LOAD/10℃ |
420+30-20Ω |
IP40 |
0,015%R.O. |
Φ3.2 40cm with 4-core shield |
0,016%R.O./30min |
0,016%R.O./30min |
Click on the part number for more information about each product
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
Response Rate
100.0%
Response Time
84.1hrs
![Digital display type hydraulic load cell [YHLD-15A (B)]-NP System Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/30015772024030628.png)
