All Categories
History
Product
Mold internal pressure measuring device MPC-201B-25Handling Company
Sanyu Electronics Industry Co., Ltd.| Image | Part Number | Price (excluding tax) | Zero point adjustment range | Load resistance | Measurement time setting | Accuracy | Extrusion detection time setting | Measuring range | External control input signal Start trigger input | External control input signal Alarm release input | Unit | Resolution | Number of output points | Number of outputs | Output | Input range | Number of input points | Bridge power supply | Sensor settings | Status LED | Start trigger input delay time setting | Start trigger input signal setting | Sampling period | Over range | Alarm release time setting | Alarm release signal setting | Alarm output signal setting | Analog filter | RAM | EEPROM | CH enable/disable setting | A/D internal resolution |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
MPC-201B-25 |
Available upon quote |
Adjustable from -0.1mV/V to 0.7mV/V with zero set function |
5kΩ or more |
Maximum 120s, maximum 600s for long-term measurement |
±2.0%F.S. |
Start time: 0.00s~600.00s |
0MPa~999.99MPa (converted value from pressure receiving area) |
Start measurement |
Canceling the alarm output state |
MPa |
1/12,000 or more |
8CH |
Synchronized to A/D sampling |
DC0V~10V |
-0.1mV/V~0.8mV/V |
8CH |
DC5V±0.25V within 20mA (per 1CH) |
Rated capacity, rated output, pressure receiving area |
POWER,ALARM,ERROR |
0.0s~25.0s |
Rising, falling |
10ms per 1CH (0.5, 1, 2, 5, 20, 50ms switchable) |
Approximately 11V at +110% of rated pressure or more |
Enabling/disabling time control |
Enable/disable alarm release signal |
Rising, falling |
Approximately 500Hz |
Zero set data, measurement mode (superimposed/continuous) |
Measurement condition settings, alarm function settings |
Enable/disable alarm monitoring for each CH |
16bit |
Reviews shown here are reviews of companies.
