Optical transmission type flange type torque converter - TMOS
Sanyu Electronics Industry Co., Ltd.
About This Product
A sensor for measuring the torque of various drive parts such as engines, motors, and transmissions. There are products that measure torsion using strain gauges and transmit the signals using transformers, and products that transmit the signals using optical devices. Stable torque measurement is possible from a stationary state to high-speed rotation.
■Applications
・Engine dynamo torque tester
・Torque measurement and management of food stirrers
・Torque measurement of wind turbines and generators
■Features
・Low noise due to digital signal transmission (no need for ground brush)
・Higher rigidity and improved fatigue resistance using the latest structural analysis technology
・Compatible with TMNR-ME type and can be replaced
・Long-term stability is improved by using a dedicated strain gauge
・Since the dimensions are the same as the existing torque converter, it is easy to improve the performance of existing equipment and increase capacity.
- Comes with a bearing mechanism, eliminating the need to install an intermediate bearing
-
Product
Optical transmission type flange type torque converter - TMOS
-
Handling Company
Sanyu Electronics Industry Co., Ltd.
-
Categories
2 Models of Optical transmission type flange type torque converter - TMOS
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Allowable overload | Allowable shaft end load | Allowable shaft end thrust load | Allowable temperature range | Allowable thrust load | Calibration accuracy | Difference in bearing temperature rise due to rotation Double bearing side | Difference in bearing temperature rise due to rotation Single bearing side | Fatigue life | Limit overload | Material | Maximum rotation speed | Protection class | Rated capacity (R.C.) | Rated output (R.O.) | Response frequency | Rotor mass | Rotor moment of inertia | Shaft torsional rigidity | Static allowable shaft end load | Temperature effect at zero point | Temperature effect on output | Total mass | Zero point fluctuation due to rotation (noise) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Tmos-2 |
Available upon quote | 150% R.C. | 215.7N | 1.961kN | -10℃ to 80℃ (Using environment temperature is 0℃ to 40℃) | Constant 0.9807kN, maximum 1.961kN (1 time/10sec) | ±0.1% R.O. | Below 60℃/at maximum rotation speed | Below 40℃/at maximum rotation speed | 10^7 times at rated capacity | 200% R.C. |
Rotor part: Alloy steel Stator part: Alloy steel + aluminum alloy |
8,000rpm | IP40 | ±5kN・m | ±10V | 1kHz or more with shaft end open | Approximately 19kg | 241.9kg・cm2 | 440.8kN・m/rad | 2.942kN | 0.1%R.O./10℃ | 0.1%R.O./10℃ | Approximately 80kg | 0.5%R.O.p-p (at WB=1kHz) |
|
|
Tmos-1 |
Available upon quote | 150% R.C. | 215.7N | 1.961kN | -10℃ to 80℃ (Using environment temperature is 0℃ to 40℃) | Constant 0.9807kN, maximum 1.961kN (1 time/10sec) | ±0.1% R.O. | Below 60℃/at maximum rotation speed | Below 40℃/at maximum rotation speed | 10^7 times at rated capacity | 200% R.C. |
Rotor part: Alloy steel Stator part: Alloy steel + aluminum alloy |
8,000rpm | IP40 | ±3kN・m | ±10V | 1kHz or more with shaft end open | Approximately 19kg | 238.1kg・cm2 | 396.6kN・m/rad | 2.942kN | 0.1%R.O./10℃ | 0.1%R.O./10℃ | Approximately 80kg | 0.5%R.O.p-p (at WB=1kHz) |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Sanyu Electronics Industry Co., Ltd.
View more products of Sanyu Electronics Industry Co., Ltd.
