Rotary transformer type shaft torque converter-TMNR-ME
Sanyu Electronics Industry Co., Ltd.
About This Product
A sensor for measuring the torque of various drive parts such as engines, motors, and transmissions. There are products that measure torsion using strain gauges and transmit the signals using transformers, and products that transmit the signals using optical devices. Stable torque measurement is possible from a stationary state to high-speed rotation.
■Applications
・Engine dynamo torque tester
・Torque measurement and management of food stirrers
・Torque measurement of wind turbines and generators
■Features
The TMNR-*ME type torque transducer is a detector that uses double bearings and can measure torque from stationary shafts to high-speed rotating shafts. By making the bearing part double, both radial and thrust strength are higher than the standard product (TMNR type), and direct coupling with propeller shafts, etc. is possible. Furthermore, since the dripping lubricant method is standard, it is also possible to measure torque under heavy loads.
Since it uses a high-performance rotary transformer, it can be used not only for torque measurement but also for instrumentation control fields, such as automotive test stands. By attaching a rotation detector (sold separately), the rotation speed can be measured, so it is also possible to measure horsepower such as prime mover output.
-
Product
Rotary transformer type shaft torque converter-TMNR-ME
-
Handling Company
Sanyu Electronics Industry Co., Ltd.
-
Categories
6 Models of Rotary transformer type shaft torque converter-TMNR-ME
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Allowable overload | Allowable shaft end load | Allowable shaft end thrust load | Allowable temperature range | Current consumption | Detection accuracy | Detection distance | Detection element | Detection gear | Insulation resistance (body-bridge) | Limit overload | Mass | Maximum rotation speed | Measuring range | Output waveform | Power supply used | Protection class | Rated capacity (R.C.) | Rated output (R.O.) | Recommended applied voltage | Response frequency | Rotor mass | Rotor moment of inertia | Shaft torsional rigidity | Static allowable shaft end load | Temperature effect at zero point | Temperature effect on output | Temperature rise due to rotation Double bearing side | Temperature rise due to rotation Single bearing side | Zero point variation due to rotation |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
TMNR-500NME |
Available upon quote | 120% R.C. | 34.32N | Constant 980.7N, maximum 1,961 (1 time/10sec) | 0℃ to 90℃ (Using environment temperature is 0℃ to 40℃) | - | ±0.2% R.O. | - | - | - | 500MΩ or more | 200% R.C. | Approximately 40kg | 10,000rpm | - | - | - | IP40 | ±500N・m | 1.6mV/V±0.32mV/V | 4V AC | 1kHz or more with shaft end open | Approximately 10.5kg | 63.35kg・㎠ | 72.12kN・m/rad | 0.490kN | 0.1%R.O./10℃ | 0.1%LOAD/10℃ | Below 60℃/at maximum rotation speed | Below 40℃/at maximum rotation speed | 0.2% R.O. |
|
|
TMNR-1KNME |
Available upon quote | 120% R.C. | 88.26N | Constant 980.7N, maximum 1,961 (1 time/10sec) | 0℃ to 90℃ (Using environment temperature is 0℃ to 40℃) | - | ±0.2% R.O. | - | - | - | 500MΩ or more | 200% R.C. | Approximately 40kg | 10,000rpm | - | - | - | IP40 | ±1kN・m | 1.6mV/V±0.32mV/V | 4V AC | 1kHz or more with shaft end open | Approximately 10.5kg | 63.55kg・㎠ | 125.8kN・m/rad | 0.981kN | 0.1%R.O./10℃ | 0.1%LOAD/10℃ | Below 60℃/at maximum rotation speed | Below 40℃/at maximum rotation speed | 0.2% R.O. |
|
|
TMNR-2KNME |
Available upon quote | 120% R.C. | 122.6N | Constant 980.7N, maximum 1,961 (1 time/10sec) | 0℃ to 90℃ (Using environment temperature is 0℃ to 40℃) | - | ±0.2% R.O. | - | - | - | 500MΩ or more | 200% R.C. | Approximately 40kg | 10,000rpm | - | - | - | IP40 | ±2kN・m | 1.6mV/V±0.32mV/V | 4V AC | 1kHz or more with shaft end open | Approximately 10.5kg | 63.74kg・㎠ | 177.7kN・m/rad | 1.961kN | 0.1%R.O./10℃ | 0.1%LOAD/10℃ | Below 60℃/at maximum rotation speed | Below 40℃/at maximum rotation speed | 0.2% R.O. |
|
|
TMNR-3KNME |
Available upon quote | 120% R.C. | 215.7N | Constant 980.7N, maximum 1,961 (1 time/10sec) | 0℃ to 90℃ (Using environment temperature is 0℃ to 40℃) | - | ±0.2% R.O. | - | - | - | 500MΩ or more | 200% R.C. | Approximately 68kg | 8,000rpm | - | - | - | IP40 | ±3kN・m | 1.6mV/V±0.32mV/V | 4V AC | 1kHz or more with shaft end open | Approximately 16.5kg | 143.0kg・㎠ | 309.1kN・m/rad | 2.942kN | 0.1%R.O./10℃ | 0.1%LOAD/10℃ | Below 60℃/at maximum rotation speed | Below 40℃/at maximum rotation speed | 0.2% R.O. |
|
|
TMNR-5KNME |
Available upon quote | 120% R.C. | 980.7N | Constant 980.7N, maximum 1,961 (1 time/10sec) | 0℃ to 90℃ (Using environment temperature is 0℃ to 40℃) | - | ±0.2% R.O. | - | - | - | 500MΩ or more | 200% R.C. | Approximately 86kg | 6,000rpm | - | - | - | IP40 | ±5kN・m | 1.6mV/V±0.32mV/V | 4V AC | 1kHz or more with shaft end open | Approximately 21kg | 193.2kg・㎠ | 513.6kN・m/rad | 4.903kN | 0.1%R.O./10℃ | 0.1%LOAD/10℃ | Below 60℃/at maximum rotation speed | Below 40℃/at maximum rotation speed | 0.2% R.O. |
|
|
Mp981-1 |
Available upon quote | - | - | - | - | Approx. 30mA (at 12V) | - | 1mm or less | Detection by magnetoresistive element | Ferromagnetic material (module 0.5~3, tooth width 3mm or more) | - | - | Approximately 80g (including 2 mounting nuts) | - | 1Hz~20kHz (1rpm~20,000rpm depending on combination with gear 60 detection gear) |
L+0.5V or less Within H+5V±0.5V (square wave) |
DC12V±2V | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Sanyu Electronics Industry Co., Ltd.
View more products of Sanyu Electronics Industry Co., Ltd.
