Rotary transformer type shaft torque converter-TMNR
Sanyu Electronics Industry Co., Ltd.
About This Product
A sensor for measuring the torque of various drive parts such as engines, motors, and transmissions. There are products that measure torsion using strain gauges and transmit the signals using transformers, and products that transmit the signals using optical devices. Stable torque measurement is possible from a stationary state to high-speed rotation.
■Applications
・Engine dynamo torque tester
・Torque measurement and management of food stirrers
・Torque measurement of wind turbines and generators
■Features
The TMNR type torque converter uses a highly efficient rotary transformer to transmit the electrical signal detected by the torque sensing section. Therefore, since there is no contact between the drive side and the measurement side, stable performance can be achieved even during long measurements.
It is used not only for measurement but also for instrumentation control. Since it uses a high-performance rotary transformer, it can be used not only for torque measurement but also for controlling stirring force and kneading force in the instrumentation control field, such as the food chemical industry. By attaching a rotation detector (sold separately), the rotation speed can be measured, so it is also possible to measure the horsepower of the prime mover, etc.
-
Product
Rotary transformer type shaft torque converter-TMNR
-
Handling Company
Sanyu Electronics Industry Co., Ltd.
-
Categories
6 Models of Rotary transformer type shaft torque converter-TMNR
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Allowable overload | Allowable temperature range | Cable | Connector | Current consumption | Detection accuracy | Detection distance | Detection element | Detection gear | Insulation resistance (body-bridge) | Limit overload | Load resistance | Mass | Maximum rotation speed | Measuring range | Operating temperature range | Output impedance | Output method | Output waveform | Power supply used | Protection circuit | Protection class | Rated capacity (R.C.) | Rated output (R.O.) | Recommended applied voltage | Storage temperature range | Temperature effect at zero point | Temperature effect on output | Temperature rise due to rotation | Zero point variation due to rotation |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Mp981 |
Available upon quote | - | - |
MX-7105 (accessories) 5m with 5-core shield One side connector, one side crimp terminal Connector model: R04-PB6F Crimp terminal model: TM1.25-3.5S |
Connector model with receptacle: R04-R6M | Approx. 30mA (at 12V) | - | 1mm or less | Detection by magnetoresistive element | Ferromagnetic material (module 0.5~3, tooth width 3mm or more) | - | - | 500Ω or more | Approximately 80g (including 2 mounting nuts) | - | 1Hz~20kHz (1rpm~20,000rpm depending on combination with gear 60 detection gear) | -10~70℃ | Approximately 330Ω | Float earth |
L+0.5V or less Within H+5V±0.5V (square wave) |
DC12V±2V |
Power supply polarity reverse connection protection Output short circuit protection |
- | - | - | - | -20~80℃ | - | - | - | - |
|
|
Nrbs |
Available upon quote | - | - | - | - | - | - | - | - | - | - | - | - | Approximately 1.2~4.5kg | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
Tmnr-2knm_5knm |
Available upon quote | 120% R.C. | 0°C to 90°C (Due to bearing heat generation, operating environment temperature is 0°C to 40°C) | - | - | - | ±0.5% R.O. (However, in case of CSA-561 combination) | - | - | - | 500MΩ or more | 200% R.C. | - | Approximately 21kg | 5,000rpm | - | - | - | - | - | - | - | IP40 | 2kN・m, 3kN・m, 5kN・m | 1.6mV/V±0.32mV/V (However, in case of CSA-561 combination) | 2V AC | - | 0.2%R.O./10℃ | 0.2%LOAD/10℃ | Below 50℃/at maximum rotation speed | 0.3% R.O. |
|
|
Tmnr-10knm |
Available upon quote | 120% R.C. | 0°C to 90°C (Due to bearing heat generation, operating environment temperature is 0°C to 40°C) | - | - | - | ±0.5% R.O. (However, in case of CSA-561 combination) | - | - | - | 500MΩ or more | 200% R.C. | - | Approximately 32kg | 4,000rpm | - | - | - | - | - | - | - | IP40 | 10kN・m | 1.6mV/V±0.32mV/V (However, in case of CSA-561 combination) | 2V AC | - | 0.2%R.O./10℃ | 0.2%LOAD/10℃ | Below 50℃/at maximum rotation speed | 0.3% R.O. |
|
|
Tmnr-100nm_200nm |
Available upon quote | 120% R.C. | 0°C to 90°C (Due to bearing heat generation, operating environment temperature is 0°C to 40°C) | - | - | - | ±0.5% R.O. (However, in case of CSA-561 combination) | - | - | - | 500MΩ or more | 200% R.C. | - | Approximately 3kg | 10,000rpm | - | - | - | - | - | - | - | IP40 | 100N・m, 200N・m | 1.6mV/V±0.32mV/V (However, in case of CSA-561 combination) | 2V AC | - | 0.2%R.O./10℃ | 0.2%LOAD/10℃ | Below 40℃/at maximum rotation speed | 0.5% R.O. |
|
|
Tmnr-500nm_1knm |
Available upon quote | 120% R.C. | 0°C to 90°C (Due to bearing heat generation, operating environment temperature is 0°C to 40°C) | - | - | - | ±0.5% R.O. (However, in case of CSA-561 combination) | - | - | - | 500MΩ or more | 200% R.C. | - | Approximately 7.5kg | 8,000rpm | - | - | - | - | - | - | - | IP40 | 500N・m, 1kN・m | 1.6mV/V±0.32mV/V (However, in case of CSA-561 combination) | 2V AC | - | 0.2%R.O./10℃ | 0.2%LOAD/10℃ | Below 40℃/at maximum rotation speed | 0.3% R.O. |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Sanyu Electronics Industry Co., Ltd.
View more products of Sanyu Electronics Industry Co., Ltd.
