![LabSen241-180 [Ultra thin long electrode body] Glass pH electrode for ultra-trace samples such as NMR tubes Minimum measurement amount: 50ul BNC connector-LabSen241-180](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/30022802024041944.png)
LabSen241-180 [Ultra thin long electrode body] Glass pH electrode for ultra-trace samples such as NMR tubes Minimum measurement amount: 50ul BNC connector
Apera Instruments Co., Ltd.
About This Product
■APERA・Glass pH electrode LabSen® series
Accurate pH measurements start with the correct pH electrode, so it is difficult to use the same shaped electrode for every pH measurement. Based on our long track record and experience, APERA develops and supplies pH electrodes with a variety of structures suitable for specific applications.
■LabSen®241-180 electrode features:
・The ultra-slender pH measurement section (ø3mm x 180mm) is compatible with NMR test tubes with a minimum measurement volume of 50ul and sample containers that normal electrodes cannot reach, so it is recommended for precious samples that are only available in extremely small quantities. .
- The thick film glass response part, which is formulated with special ingredients, has a low internal resistance (<450MΩ), so even if the response membrane area is small, the pH measurement reaction is rapid and highly reproducible.
- Thickened responsive glass membrane that can withstand impacts to the electrodes.
- A long-life comparison system is adopted that contains a sufficient amount of silver chloride for the life of the electrode, achieving long-term stable PH measurement.
・There are no bubbles inside the responsive glass membrane, and the measured values can be stabilized quickly.
-Easy-to-handle electrode protection cap allows you to always store electrodes cleanly and safely.
・If the connection part on the meter side is BNC type, LabSen® pH electrode can be connected regardless of manufacturer.
・There is a six-month warranty period after purchase.
■Available applications:
Measurement in flasks, test tubes, glass bottles, etc.; for research institutes, universities, quality control, biotechnology, pharmaceuticals, etc.
■Electrode specifications
・Measurement range: 0~14pH, 0~100℃
・Liquid junction: porous ceramic
・Comparison system type: Long life
・Internal liquid: 3M KCl Refillable
・Shaft size: Φ12-ø3mm x 240mm
・Cable length: 1m
■Notes:
・Please be sure to perform calibration before use.
- White crystals may adhere to the protective cap after storing the electrode, but this does not affect performance, so please use it with confidence.
・Open the internal fluid replenishment port when taking measurements. After measuring, close the refill port.
・Proper care will extend the life of the electrode, so please refer to the instruction manual included with the product for details.
-
Product
LabSen241-180 [Ultra thin long electrode body] Glass pH electrode for ultra-trace samples such as NMR tubes Minimum measurement amount: 50ul BNC connector
-
Handling Company
Apera Instruments Co., Ltd.
-
Categories
1 Models of LabSen241-180 [Ultra thin long electrode body] Glass pH electrode for ultra-trace samples such as NMR tubes Minimum measurement amount: 50ul BNC connector
| Product Image | Part Number | Price (excluding tax) |
|---|---|---|
|
|
LabSen241-180 |
$ 259.35〜 |
Customers who viewed this product also viewed
Other products of Apera Instruments Co., Ltd.
View more products of Apera Instruments Co., Ltd.