![LabSen241-3 [Ultra-fine electrode body] Glass pH electrode for trace samples BNC connector-LabSen241-3](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/30022802024041942.png)
LabSen241-3 [Ultra-fine electrode body] Glass pH electrode for trace samples BNC connector
Apera Instruments Co., Ltd.
About This Product
■APERA・Glass pH electrode LabSen® series
Accurate pH measurements start with the correct pH electrode, so it is difficult to use the same shaped electrode for every pH measurement. Based on many years of experience, APERA develops and supplies pH electrodes with a variety of structures suitable for specific applications.
■LabSen®241-3 electrode features:
- The ultra-slim pH measuring section (ø3mm x 16mm and ø4mm x 54mm) is compatible with test tubes with a minimum measurement volume of 30μl and sample containers that normal electrodes cannot reach.
・If you use a special container (sold separately), it is possible to measure up to 15 μl, so it is recommended for precious samples that are available only in extremely small quantities.
- The glass body protection tube made of titanium alloy increases the strength of the electrode and avoids the impression that the glass electrode for micro-quantity measurement is easily broken.
- The glass response part, which is formulated with special ingredients, has a low internal resistance (<450MΩ), so even if the response membrane area is small, the pH measurement reaction is quick and highly reproducible.
- Thickened responsive glass membrane that can withstand impacts to the electrodes.
- A long-life comparison system is adopted that contains a sufficient amount of silver chloride for the life of the electrode, achieving long-term stable PH measurement.
・There are no bubbles inside the responsive glass membrane, and the measured values can be stabilized quickly.
-Easy-to-handle electrode protection cap allows electrodes to be stored cleanly and safely at all times.
・If the connection part on the meter side is BNC type, LabSen® pH electrode can be connected regardless of manufacturer.
・There is a six-month warranty period after purchase.
■Available applications:
Measurement in flasks, test tubes, glass bottles, etc.; for research institutes, universities, quality control, biotechnology, pharmaceuticals, etc.
■Electrode specifications
・Measurement range: 0~14pH, 0~100℃
・Liquid junction: Ceramic
・Comparison system type: Long life
・Internal liquid: 3M KCl Refillable
・Shaft size: Φ12-ø3mm x 150mm
・Cable length: 1m
■Notes:
・Please be sure to perform calibration before use.
- White crystals may adhere to the protective cap after storing the electrode, but this does not affect performance, so please use it with confidence.
・Open the internal fluid replenishment port when taking measurements. After measuring, close the refill port.
・Proper care will extend the life of the electrode, so please refer to the instruction manual included with the product for details.
-
Product
LabSen241-3 [Ultra-fine electrode body] Glass pH electrode for trace samples BNC connector
-
Handling Company
Apera Instruments Co., Ltd.
-
Categories
1 Models of LabSen241-3 [Ultra-fine electrode body] Glass pH electrode for trace samples BNC connector
| Product Image | Part Number | Price (excluding tax) |
|---|---|---|
|
|
LabSen241-3 |
$ 214.50〜 |
Customers who viewed this product also viewed
Other products of Apera Instruments Co., Ltd.
View more products of Apera Instruments Co., Ltd.