All Categories

History

  1. Metoree
  2. 2-axis turning verification software that supports nose radius correction with virtual cutting edge NCVIEW TURNwatch (Simple Tech Co., Ltd.)
2-axis turning verification software that supports nose radius correction with virtual cutting edge NCVIEW TURNwatch-NCVIEW TURNwatch
2-axis turning verification software that supports nose radius correction with virtual cutting edge NCVIEW TURNwatch-Simple Tech Co., Ltd.

2-axis turning verification software that supports nose radius correction with virtual cutting edge NCVIEW TURNwatch
Simple Tech Co., Ltd.

About This Product

Features

■NCVIEW TURNwatch is a solid simulator for 2-axis lathe processing.

-You can check the tool shape, tool path, and cutting shape of the workpiece. ・Functionality can be expanded by adding options to the main unit (basic module). Since it supports nose radius correction, even minute differences between the virtual cutting edge trajectory and cutting shape can be accurately expressed. Since the workpiece jig becomes a rotating body during rotation, the tool/holder interference check (optional) allows you to check for interference depending on when the tool is stationary or when it is rotating. Main standard features

■Verification/display

・Up to 6 screen view window splits ・Locus display by type (tool, coordinate system, canned cycle, etc.) ・2D drawing comparison ・Program number list, cue execution ・Execute from any block ・Simulation stop condition selection - Set a breakpoint in any block ・Optional skip, M00/M01 stop ・Workpiece/trajectory virtual cross section display ・Mutual link between NC data and tool path, etc.

■Report output

・Automatic creation of process chart ・Entire process can be confirmed before simulation ・Used tool number and dimension information ・Correction, rotation speed, feed speed ・Rapid feed, cutting distance ・Processing time ・Z minimum ・Tool cutting history report ・Processing information report based on trajectory and workpiece picks ・Tool path DXF output ・Hole machining report etc.

■Alarm detection

・Detection of incorrect format of NC data ・Detection of discrepancy in the radius of the start and end points of circular arcs ・Subpro depth limit check ・Detection of excessive depth of cut during diameter correction ・Detection of illegal plane switching during diameter correction ・Detection of incorrect arc startup for radius correction ・Check for missing holes and depth during tapping ・Exceeding the maximum angle during ramping processing ・Illegal detection during nose radius correction, etc.

■Support system

The NCVIEW series provides prompt and accurate technical support that can only be achieved through domestic development. The free warranty period for the NCVIEW series is one year after installation.

■Compatible controller

・FANUC ・OSP ・MELDAS ・TOSNUC ・YASNUC ・HEIDENHAIN ・SIEMENS

  • Product

    2-axis turning verification software that supports nose radius correction with virtual cutting edge NCVIEW TURNwatch

Share this product


50+ people viewing

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of 2-axis turning verification software that supports nose radius correction with virtual cutting edge NCVIEW TURNwatch

Image Part Number Price (excluding tax) Hole machining position verification Hole machining check Mechanical structure simulation Turning Tool path display Tool/holder interference check Cutting load analysis Model comparison Macro debugger Network license Solid cutting 3D drawing overlay
2-axis turning verification software that supports nose radius correction with virtual cutting edge NCVIEW TURNwatch-Part Number-NCVIEW TURNwatch

NCVIEW TURNwatch

Available upon quote

Standard features

Standard features

Optional features

Standard features

Standard features

Optional features

Optional features

Optional features

Optional features

Optional features

Standard features

Optional features

Other products of Simple Tech Co., Ltd.

Reviews shown here are reviews of companies.

High-performance cutting verification software that supports simultaneous 5-axis, compound, and 5-sided machining NCVIEW Neo-Simple Tech Co., Ltd.

High-performance cutting verification software that supports simultaneous 5-axis, compound, and 5-sided machining NCVIEW Neo

Simple Tech Co., Ltd.

50+ people viewing

NCVIEW MC3 is a 3-axis milling verification software packaged with a wealth of functions.-Simple Tech Co., Ltd.

NCVIEW MC3 is a 3-axis milling verification software packaged with a wealth of functions.

Simple Tech Co., Ltd.

70+ people viewing

Last viewed: 5 hours ago

NCVIEW TOOLwatch tool path verification software that supports simultaneous 5-axis, complex, and 5-sided machining-Simple Tech Co., Ltd.

NCVIEW TOOLwatch tool path verification software that supports simultaneous 5-axis, complex, and 5-sided machining

Simple Tech Co., Ltd.

40+ people viewing

Last viewed: 17 hours ago


View more products of Simple Tech Co., Ltd.

About Company Handling This Product

Simple Tech Co., Ltd.

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree