All Categories

History

Pressure switch hex 27 (27mm wrench size)-140
Pressure switch hex 27 (27mm wrench size)-170
Pressure switch hex 27 (27mm wrench size)-180
Pressure switch hex 27 (27mm wrench size)-184
Pressure switch hex 27 (27mm wrench size)-190
Pressure switch hex 27 (27mm wrench size)-LCI Co., Ltd.

Pressure switch hex 27 (27mm wrench size)
LCI Co., Ltd.

LCI Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

4.1hours

Very Fast Response


About This Product

■Pressure switch hex 27 (27mm wrench size)

C contact Silver or gold plated contacts ・Uses highly reliable microswitch ・Easy to change setting values ​​(Switch point settings set at the time of shipment are engraved and marked with sealing paint.) ・Hysteresis characteristics can be adjusted (excluding 0140/0141) ・High voltage resistance ・Long life even under harsh operating environments ・Connection plug resistant to humidity and dust ・Easy maintenance with protective cap ・A wide variety of screw types ・Model with cable also available ・Body material can be selected from galvanized steel or stainless steel, with a wide variety of diaphragm materials available. male thread connection ・Setting values ​​can be preset ・Non-standard material ・Connection type (optional) ・Diaphragm seal material HNBR/Silicon (optional)

■Caution

When using for oxygen, please follow regulations such as explosion-proof regulations. Also, make sure that the working pressure does not exceed 10 bar.

■IP65

This type approval does not apply unrestrictedly to all environments. It is up to the user to determine whether the connection type complies with the regulations and whether the connection type is used outside of SUCO's expectations. *Other model numbers are available.

  • Product

    Pressure switch hex 27 (27mm wrench size)

Share this product


320+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

10 Models of Pressure switch hex 27 (27mm wrench size)

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Drip-proof structure Adjustment range (unit bar) (accuracy at room temperature) Shockproof Vibration resistance Pressure resistance Mechanical life Material Connection type Operating temperature (diaphragm seal material) Hysteresis adjustable Switching frequency Current-carrying section cross-sectional area Tightening torque Short circuit current Rated power supply voltage 75volt DC Rated power supply voltage 50volt DC Rated power supply voltage 250volt DC Rated power supply voltage 250volt AC 50/60Hz Rated power supply voltage 24volt DC Rated power supply voltage 125volt DC Rated current (short circuit prevention) Rated insulation voltage Rated frequency Rated thermal current Rated surge capacity Over voltage
Pressure switch hex 27 (27mm wrench size)-Part Number-140

140

Available upon quote

IP65, IP100 (terminal) (EN60529:1991+A1;1999)

0.3-1.5 (±0.2)
1-10 (±0.5)
10-20 (±1.0)
20-50 (±2.0)

294m/s^2; 14ms half sine wave

10g/5~200Hz sine wave

300bar

10^6 times (maximum load 50bar)

Galvanized steel

G 1/4
NPT 1/8
NPT 1/4
7/16-20 UNF
9/16-18 UNF

NBR -30℃-+100℃
EPDM -30℃-+120℃
FKM -5℃-+120℃
Silicone -40℃-+120℃ (optional)
HNBR -30℃-+120℃ (optional)

-

200 times/min

0.5 - 1.5mm^2

<0.35Nm

<350amp

Rated operating current 0.5/0.25amp (Usage classification DC 12/DC 13)

Rated operating current 1/0.5amp (Usage classification DC 12/DC 13)

Rated operating current 0.15/0.1amp (Usage classification DC 12/DC 13)

Rated operating current 2amp (use classification AC 12)

Rated operating current 2/1amp (Usage classification DC 12/DC 13)

Rated operating current 0.2/0.1amp (Usage classification DC 12/DC 13)

Up to 3.5amp

300volt

DC and 50/60Hz

5amp

4kV

<2.5kV

Pressure switch hex 27 (27mm wrench size)-Part Number-141

141

Available upon quote

IP65, IP100 (terminal) (EN60529:1991+A1;1999)

50-150 (±5.0)

294m/s^2; 14ms half sine wave

10g/5~200Hz sine wave

600bar

10^6 times (maximum load 50bar)

Galvanized steel

G 1/4
NPT 1/8
NPT 1/4
7/16-20 UNF
9/16-18 UNF

NBR -30℃-+100℃
EPDM -30℃-+120℃
FKM -5℃-+120℃
Silicone -40℃-+120℃ (optional)
HNBR -30℃-+120℃ (optional)

-

200 times/min

0.5 - 1.5mm^2

<0.35Nm

<350amp

Rated operating current 0.5/0.25amp (Usage classification DC 12/DC 13)

Rated operating current 1/0.5amp (Usage classification DC 12/DC 13)

Rated operating current 0.15/0.1amp (Usage classification DC 12/DC 13)

Rated operating current 2amp (use classification AC 12)

Rated operating current 2/1amp (Usage classification DC 12/DC 13)

Rated operating current 0.2/0.1amp (Usage classification DC 12/DC 13)

Up to 3.5amp

300volt

DC and 50/60Hz

5amp

4kV

<2.5kV

Pressure switch hex 27 (27mm wrench size)-Part Number-170

170

Available upon quote

IP65, IP100 (terminal) (EN60529:1991+A1;1999)

・100bar
0.3-1.5 (±0.2)
1-10 (±0.5)
・300bar
1-10 (±0.5)
10-50 (±3.0)
10-100 (±3.0-5.0)

294m/s^2; 14ms half sine wave

10g/5~200Hz sine wave

100/300bar

10^6 times (maximum load 50bar)

Galvanized steel

M 10×1 taper
M 12×1.5
G 1/4

NBR -30℃-+100℃
EPDM -30℃-+120℃
FKM -5℃-+120℃
Silicone -40℃-+120℃ (optional)
HNBR -30℃-+120℃ (optional)

Adjustable in the range of 10-30%, standard value of hiss is 10-20%

200 times/min

- - - - - - - - - - - - - - -
Pressure switch hex 27 (27mm wrench size)-Part Number-171

171

Available upon quote

IP65, IP100 (terminal) (EN60529:1991+A1;1999)

50-200 (±5.0)

294m/s^2; 14ms half sine wave

10g/5~200Hz sine wave

600bar

10^6 times (maximum load 50bar)

Galvanized steel

M 10×1 taper
M 12×1.5
G 1/4

NBR -30℃-+100℃
EPDM -30℃-+120℃
FKM -5℃-+120℃
Silicone -40℃-+120℃ (optional)
HNBR -30℃-+120℃ (optional)

Adjustable in the range of 10-30%, standard value of hiss is 10-20%

200 times/min

- - - - - - - - - - - - - - -
Pressure switch hex 27 (27mm wrench size)-Part Number-180

180

Available upon quote

IP65, IP100 (terminal) (EN60529:1991+A1;1999)

・100bar
0.3-1.5 (±0.2)
1-10 (±0.5)
・300bar
1-10 (±0.5)
10-50 (±3.0)
10-100 (±3.0-5.0)

294m/s^2; 14ms half sine wave

10g/5~200Hz sine wave

100/300bar

10^6 times (maximum load 50bar)

Galvanized steel

M 10×1 taper
M 12×1.5
G 1/4

NBR -30℃-+100℃
EPDM -30℃-+120℃
FKM -5℃-+120℃
Silicone -40℃-+120℃ (optional)
HNBR -30℃-+120℃ (optional)

Adjustable in the range of 10-30%, standard value of hiss is 10-20%

200 times/min

0.5 - 1.5mm^2

<0.35Nm

<350amp

Rated operating current 1/0.5amp (Usage classification DC 12/DC 13)

Rated operating current 2/1amp (Usage classification DC 12/DC 13)

Rated operating current 0.25/0.2amp (Usage classification DC 12/DC 13)

Rated operating current 4amp (use classification AC 12), 1amp (use classification AC 14)

Rated operating current 4/4amp (Usage classification DC 12/DC 13)

Rated operating current 0.3/0.2amp (Usage classification DC 12/DC 13)

Up to 3.5amp

300volt

DC and 50/60Hz

5amp

4kV

<2.5kV

Pressure switch hex 27 (27mm wrench size)-Part Number-181

181

Available upon quote

IP65, IP100 (terminal) (EN60529:1991+A1;1999)

50-200 (±5.0)

294m/s^2; 14ms half sine wave

10g/5~200Hz sine wave

600bar

10^6 times (maximum load 50bar)

Galvanized steel

M 10×1 taper
M 12×1.5
G 1/4

NBR -30℃-+100℃
EPDM -30℃-+120℃
FKM -5℃-+120℃
Silicone -40℃-+120℃ (optional)
HNBR -30℃-+120℃ (optional)

Adjustable in the range of 10-30%, standard value of hiss is 10-20%

200 times/min

0.5 - 1.5mm^2

<0.35Nm

<350amp

Rated operating current 1/0.5amp (Usage classification DC 12/DC 13)

Rated operating current 2/1amp (Usage classification DC 12/DC 13)

Rated operating current 0.25/0.2amp (Usage classification DC 12/DC 13)

Rated operating current 4amp (use classification AC 12), 1amp (use classification AC 14)

Rated operating current 4/4amp (Usage classification DC 12/DC 13)

Rated operating current 0.3/0.2amp (Usage classification DC 12/DC 13)

Up to 3.5amp

300volt

DC and 50/60Hz

5amp

4kV

<2.5kV

Pressure switch hex 27 (27mm wrench size)-Part Number-184

184

Available upon quote

IP65, IP100 (terminal) (EN60529:1991+A1;1999)

・100bar
0.3-1.5 (±0.2)
1-10 (±0.5)
・300bar
10-50 (±3.0)
10-100 (±3.0-5.0)

294m/s^2; 14ms half sine wave

10g/5~200Hz sine wave

100/300bar

10^6 times (maximum load 50bar)

Galvanized steel

M 10×1 taper
M 12×1.5
G 1/4

NBR -30℃-+100℃
EPDM -30℃-+120℃
FKM -5℃-+120℃
Silicone -40℃-+120℃ (optional)
HNBR -30℃-+120℃ (optional)

Adjustable in the range of 10-30%, standard value of hiss is 10-20%

200 times/min

0.5 - 1.5mm^2

<0.35Nm

<350amp

Rated operating current 1/0.5amp (Usage classification DC 12/DC 13)

Rated operating current 2/1amp (Usage classification DC 12/DC 13)

Rated operating current 0.25/0.2amp (Usage classification DC 12/DC 13)

Rated operating current 4amp (use classification AC 12), 1amp (use classification AC 14)

Rated operating current 4/4amp (Usage classification DC 12/DC 13)

Rated operating current 0.3/0.2amp (Usage classification DC 12/DC 13)

Up to 3.5amp

300volt

DC and 50/60Hz

5amp

4kV

<2.5kV

Pressure switch hex 27 (27mm wrench size)-Part Number-185

185

Available upon quote

IP65, IP100 (terminal) (EN60529:1991+A1;1999)

50-200 (±5.0)

294m/s^2; 14ms half sine wave

10g/5~200Hz sine wave

600bar

10^6 times (maximum load 50bar)

Galvanized steel

M 10×1 taper
M 12×1.5
G 1/4

NBR -30℃-+100℃
EPDM -30℃-+120℃
FKM -5℃-+120℃
Silicone -40℃-+120℃ (optional)
HNBR -30℃-+120℃ (optional)

Adjustable in the range of 10-30%, standard value of hiss is 10-20%

200 times/min

0.5 - 1.5mm^2

<0.35Nm

<350amp

Rated operating current 1/0.5amp (Usage classification DC 12/DC 13)

Rated operating current 2/1amp (Usage classification DC 12/DC 13)

Rated operating current 0.25/0.2amp (Usage classification DC 12/DC 13)

Rated operating current 4amp (use classification AC 12), 1amp (use classification AC 14)

Rated operating current 4/4amp (Usage classification DC 12/DC 13)

Rated operating current 0.3/0.2amp (Usage classification DC 12/DC 13)

Up to 3.5amp

300volt

DC and 50/60Hz

5amp

4kV

<2.5kV

Pressure switch hex 27 (27mm wrench size)-Part Number-190

190

Available upon quote

IP65, IP100 (terminal) (EN60529:1991+A1;1999)

・100bar
0.3-1.5 (±0.2)
1-10 (±0.5)
・300bar
1-10 (±0.5)
10-50 (±3.0)
10-100 (±3.0-5.0)

294m/s^2; 14ms half sine wave

10g/5~200Hz sine wave

100/300bar

10^6 times (maximum load 50bar)

Galvanized steel

M 10×1 taper
M 12×1.5
G 1/4

NBR -30℃-+100℃
EPDM -30℃-+120℃
FKM -5℃-+120℃
Silicone -40℃-+120℃ (optional)
HNBR -30℃-+120℃ (optional)

Adjustable in the range of 10-30%, standard value of hiss is 10-20%

200 times/min

- - - - - - - - - - - - - - -
Pressure switch hex 27 (27mm wrench size)-Part Number-191

191

Available upon quote

IP65, IP100 (terminal) (EN60529:1991+A1;1999)

50-200 (±5.0)

294m/s^2; 14ms half sine wave

10g/5~200Hz sine wave

600bar

10^6 times (maximum load 50bar)

Galvanized steel

M 10×1 taper
M 12×1.5
G 1/4

NBR -30℃-+100℃
EPDM -30℃-+120℃
FKM -5℃-+120℃
Silicone -40℃-+120℃ (optional)
HNBR -30℃-+120℃ (optional)

Adjustable in the range of 10-30%, standard value of hiss is 10-20%

200 times/min

- - - - - - - - - - - - - - -

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Pressure Switches Products

Other products of LCI Co., Ltd.

Reviews shown here are reviews of companies.


View more products of LCI Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

4.1hrs


Company Review

4.0
  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree