All Categories

History

Stone splash stop safety mowing brush cutter attachment Super Calmar PRO-ASK-V23 [Standard specifications]
Stone splash stop safety mowing brush cutter attachment Super Calmar PRO-ASK-BS20V23 [Bottom slider 20 specifications]
Stone splash stop safety mowing brush cutter attachment Super Calmar PRO-Idec Co., Ltd.

Stone splash stop safety mowing brush cutter attachment Super Calmar PRO
Idec Co., Ltd.

Idec Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

122.1hours


About This Product

Super Calmar 10 major features for ultimate performance

■Safe with less stone splashing

The reduction gearbox inside the attachment reduces the engine speed to approximately 1/20th. This reduction mechanism and the rotating scissor drive of the upper and lower blades allow for efficient cutting of grass even at low speeds, and prevents stones and other debris from flying away.

■You can trim the edges.

Even if the cutting blade touches an obstacle, there is little bounce back, making edge mowing smooth and safe.

■Improve work efficiency in dangerous locations

Conventional high-speed blades can work safely and efficiently in dangerous areas, such as in crowded parks, busy roads, and around buildings. Also effective as a measure against cable breakage. The reduced-speed rotating scissors type clips weeds by clipping them, so it basically does not cut anything that cannot be clipped (about 1.5 cm or more in diameter). There is no edge on the outside of the blade, so it is designed to be safe and prevent damage to objects it comes in contact with. It is also used as a measure against cutting cables such as FP pipes. It is also possible to further reduce the risk of cutting by changing the blade to a ``fine blade''.

■Water resistant

Thanks to its low-speed vertical rotation scissor cutting system and simple waterproof structure, there is no suction or splashing into the water surface compared to single-blade blades, allowing you to safely mow grass near water, such as in the ridges of rice fields.

■Grass does not wrap around it

The integrated structure of the gear case and output shaft creates a donut-shaped blade without a core, eliminating grass from getting wrapped around the shaft.

■Safety secret: “Rotating scissors & reduction drive gear system”

A reduction mechanism based on unique technology solves the danger of mowing.

■Easy to put on the ground

Because it rotates at a low speed, you can mow by placing it on the ground and sliding it, compared to the single-blade method where the cutting blade is lifted off the ground. Moreover, the cutting blade moves like a top when the lower blade rotates, so no extra force is required.

■Improved adhesion of the cutting blade

The unique bottom plate stopper structure significantly improves the adhesion between the upper and lower blades, and at the same time allows for automatic adjustment of the gap between the blades.

■Easy to care for and repair

It has an innovative structure that allows you to easily remove the upper and lower blades by simply removing the bottom plate retainer using radio pliers or snap ring pliers. The main body can be disassembled, making it easy to replace and repair the internal gear.

■Can be installed on your existing brush cutter

Can be installed on most brush cutters using the included adapter. It cannot be installed on some special specification brush cutters.

  • Product

    Stone splash stop safety mowing brush cutter attachment Super Calmar PRO

Share this product


140+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

2 Models of Stone splash stop safety mowing brush cutter attachment Super Calmar PRO

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Purpose Reduction method (reduction ratio) Body mass (kg) Recommended brush cutter engine Total length x width x height (mm) Accessories
Stone splash stop safety mowing brush cutter attachment Super Calmar PRO-Part Number-ASK-V23 [Standard specifications]

ASK-V23 [Standard specifications]

$ 172.25〜

Mowing grass, weeds, and lawns (light/medium work)

Reverse rotation gear reduction Upper blade 1:18.8, lower blade 1:13.5

1.8

Displacement 23cc or more

230×258×101

Mounting kit, blade protection cover

Stone splash stop safety mowing brush cutter attachment Super Calmar PRO-Part Number-ASK-BS20V23 [Bottom slider 20 specifications]

ASK-BS20V23 [Bottom slider 20 specifications]

$ 180.70〜

Mowing grass, weeds, and lawns (light/medium work)

Reverse rotation gear reduction Upper blade 1:18.8, lower blade 1:13.5

1.9

Displacement 23cc or more

230×258×107

Mounting kit, blade protection cover

Click on the part number for more information about each product

Other products of Idec Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Idec Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

122.1hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree