All Categories

History

LED lighting Facility/Outdoor High ceiling lighting Separate power supply type-DL-EH401N
LED lighting Facility/Outdoor High ceiling lighting Separate power supply type-DL-EH301N
LED lighting Facility/Outdoor High ceiling lighting Separate power supply type-DL-EH204N
LED lighting Facility/Outdoor High ceiling lighting Separate power supply type-DL-EH104N
LED lighting Facility/Outdoor High ceiling lighting Separate power supply type-Sharp Marketing Japan Co., Ltd.

LED lighting Facility/Outdoor High ceiling lighting Separate power supply type
Sharp Marketing Japan Co., Ltd.

Sharp Marketing Japan Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

385.7hours


About This Product

Contributes to energy saving of high ceiling lighting. It is lightweight and can be used to replace existing lighting.

■Lighting types and power sources that can be selected according to the purpose

Lighting equipment, brightness, and beam angle can be selected according to the installation environment. And the power source (dimmable or non-dimmable) can be selected. *Depending on the light distribution, some models may not be included in the lineup.

■Easy renewal of existing lighting equipment

We offer a lineup of high-ceiling lighting with separate power supply that can use existing infrastructure. Compatible with direct mounting, mounting on round exposed boxes, etc. The distance between the appliance and the power supply (secondary side) can be up to 50m.

■Achieves high luminous flux maintenance rate (90%)

By using LEDs with a high luminous flux maintenance rate, the luminous flux decreases less than existing HIDs, and it can be used brightly until the end of its life. (94% for 1KW type, 700W type, and under-eave models)

■Achieve weight reduction

Heat dissipation technology without a fan reduces the weight of the appliance (built-in heat dissipation fins) The weight of the main unit is at the same level as a conventional HID, so there is no need to worry about strain on the ceiling.

■Equipped with holder compatible with sloped ceilings

Equipped with a holder compatible with sloped ceilings as standard. (Compatible with ±30 degrees) Furthermore, the installation of a quick-connect terminal block greatly reduces construction effort. When installing under the eaves or in a location where wind may blow in, fixing hardware is available as an optional part.

■Dimmer with output adjustment function (PWM method) compatible power supply

It can be used for illumination adjustment and energy saving measures.

■Equipped with protection functions that take safety into account

Applicable power supplies are equipped with output short-circuit protection and overcurrent protection functions to ensure safety.

  • Product

    LED lighting Facility/Outdoor High ceiling lighting Separate power supply type

Share this product


380+ people viewing

Last viewed: 54 minutes ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

8 Models of LED lighting Facility/Outdoor High ceiling lighting Separate power supply type

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Mass Dimmable Color temperature Power consumption Main body Rated voltage Fixture luminous flux Applicable power supply (sold separately) Light source life Remarks Holder Beam angle Cover Secondary distance
LED lighting Facility/Outdoor High ceiling lighting Separate power supply type-Part Number-DL-EH401N

DL-EH401N

Available upon quote

Body approx. 4.8kg, power source approx. 1.5kg x 2 units

Approximately 5~100%
(PWM signal method)

Daylight white, 5,000K

At 200V: 285W

Aluminum (gray paint)

AC100~242V

45,500lm

DL-YPH10×2

60,000 hours
(Luminous flux maintenance rate 94%)

Please use two DL-YPH10 power supplies at a setting of 85% or less.

Aluminum die-cast (gray paint)

90 degrees

Polycarbonate (transparent)

50m

LED lighting Facility/Outdoor High ceiling lighting Separate power supply type-Part Number-DL-EH402N

DL-EH402N

Available upon quote

Body approx. 4.8kg, power source approx. 1.5kg x 2 units

Approximately 5~100%
(PWM signal method)

Daylight white, 5,000K

At 200V: 285W

Aluminum (gray paint)

AC100~242V

45,500lm

DL-YPH10×2

60,000 hours
(Luminous flux maintenance rate 94%)

Please use two DL-YPH10 power supplies at a setting of 85% or less.

Aluminum die-cast (gray paint)

60 degrees

Polycarbonate (transparent)

50m

LED lighting Facility/Outdoor High ceiling lighting Separate power supply type-Part Number-DL-EH301N

DL-EH301N

Available upon quote

Body approx. 3.8kg, power source approx. 1.5kg

Not dimmable

Daylight white, 5,000K

At 200V: 202W

Aluminum (gray paint)

AC100~242V

32,500lm

DL-YPH12

60,000 hours
(Luminous flux maintenance rate 94%)

-

Aluminum die-cast (gray paint)

90 degrees

Polycarbonate (transparent)

50m

LED lighting Facility/Outdoor High ceiling lighting Separate power supply type-Part Number-DL-EH302N

DL-EH302N

Available upon quote

Body approx. 3.8kg, power source approx. 1.5kg

Not dimmable

Daylight white, 5,000K

At 200V: 202W

Aluminum (gray paint)

AC100~242V

32,500lm

DL-YPH12

60,000 hours
(Luminous flux maintenance rate 94%)

-

Aluminum die-cast (gray paint)

60 degrees

Polycarbonate (transparent)

50m

LED lighting Facility/Outdoor High ceiling lighting Separate power supply type-Part Number-DL-EH204N

DL-EH204N

Available upon quote

For DL-YPH08: Body approx. 1.8kg, power source approx. 1.3kg
For DL-YPH10: Power supply approximately 1.5kg

Approximately 5~100%
(PWM control method/DL-YPH10)

Daylight white, 5,000K

At 200V: 165W

Aluminum (gray paint)

AC100~242V

24,000lm

DL-YPH08/DL-YPH10

60,000 hours
(Luminous flux maintenance rate 90%)

Built-in quick connection terminal block.

Aluminum die-cast (gray paint)

90 degrees

Polycarbonate (transparent)

50m

LED lighting Facility/Outdoor High ceiling lighting Separate power supply type-Part Number-DL-EH205N

DL-EH205N

Available upon quote

For DL-YPH08: Body approx. 1.8kg, power source approx. 1.3kg
For DL-YPH10: Power supply approximately 1.5kg

Approximately 5~100%
(PWM control method/DL-YPH10)

Daylight white, 5,000K

At 200V: 165W

Aluminum (gray paint)

AC100~242V

24,000lm

DL-YPH08/DL-YPH10

60,000 hours
(Luminous flux maintenance rate 90%)

Built-in quick connection terminal block.

Aluminum die-cast (gray paint)

60 degrees

Polycarbonate (transparent)

50m

LED lighting Facility/Outdoor High ceiling lighting Separate power supply type-Part Number-DL-EH104N

DL-EH104N

Available upon quote

For DL-YPH07: Body approx. 1.4kg, power source approx. 0.8kg
For DL-YPH09: Power supply approximately 1.0kg

Approximately 5~100%
(PWM control method・DL-YPH09)

Daylight white, 5,000K

At 200V: 87W

Aluminum (gray paint)

AC100~242V

12,600lm

DL-YPH07, DL-YPH09

60,000 hours
(Luminous flux maintenance rate 90%)

Built-in quick connection terminal block.

Aluminum die-cast (gray paint)

90 degrees

Polycarbonate (transparent)

50m

LED lighting Facility/Outdoor High ceiling lighting Separate power supply type-Part Number-DL-EH105N

DL-EH105N

Available upon quote

For DL-YPH07: Body approx. 1.4kg, power source approx. 0.8kg
For DL-YPH09: Power supply approximately 1.0kg

Approximately 5~100%
(PWM control method・DL-YPH09)

Daylight white, 5,000K

At 200V: 87W

Aluminum (gray paint)

AC100~242V

12,600lm

DL-YPH07, DL-YPH09

60,000 hours
(Luminous flux maintenance rate 90%)

Built-in quick connection terminal block.

Aluminum die-cast (gray paint)

60 degrees

Polycarbonate (transparent)

50m

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Led Light Sources Products

Other products of Sharp Marketing Japan Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Sharp Marketing Japan Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

385.7hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree