All Categories

History

Column beam joining method for square/circular steel pipe columns and H-shaped steel beams Fablax®DS Structural material-DS25
Column beam joining method for square/circular steel pipe columns and H-shaped steel beams Fablax®DS Structural material-Asahi Kasei Construction Materials Co., Ltd.

Column beam joining method for square/circular steel pipe columns and H-shaped steel beams Fablax®DS Structural material
Asahi Kasei Construction Materials Co., Ltd.

Asahi Kasei Construction Materials Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

4.7hours

Very Fast Response


About This Product

■Overview of construction method

FabluxeDS (column beam joining method) is a new generation high-performance joining method that can create unprecedented architectural spaces in steel frame buildings. This is an innovative joining method that streamlines the manufacturing process, which was previously difficult, and allows buildings of various shapes to be easily constructed. The joint between the beam flange and FabluxeDS satisfies the load-bearing joint conditions, and the rigidity of the frame using this construction method can be calculated as the rigidity of the frame by replacing the column beams with wire rods and making the nodes stiff. , does not require special structural calculations. Features

■High quality forged steel products

FabluxeDS is a forged steel product manufactured based on strict management standards and has been certified by the Minister of Land, Infrastructure, Transport and Tourism based on Article 37, Item 2 of the Building Standards Act.

■Column drawing (square steel pipe column)

This is a construction method that can be applied to column beam joints where columns of different sizes are used on the upper and lower floors, and columns with different outer diameters of 50 mm or 100 mm (*) can be joined. *In case of column alignment

■Eccentric joining of column materials (square steel pipe columns)

If the difference in column size between the upper and lower floors is up to 50mm, it is possible to join them with the column center eccentric by up to 25mm.

■Connecting a square steel pipe column and a circular steel pipe column

It can also be applied to column joints with different column shapes on the upper and lower floors, creating a structure with high design and economic efficiency.

■Beam step

FabluxeDS can accommodate beam steps of approximately 50mm within the height range. It contributes to barrier-free construction while ensuring welding quality even at beam steps where UT inspection was difficult with conventional diaphragm construction methods. If used in conjunction with a conventional diaphragm, it can accommodate even larger beam steps.

■Diagonal column (square steel pipe column), diagonal beam

Columns can be joined at an angle (*), and beams can be joined diagonally (*) in a flat or vertical direction, making it possible to create a variety of spatial structures. * Possible as long as the joint width of the pillar does not exceed the outer diameter of FabluxeDS

■Shorter construction period

FabluxeDS has a short delivery time as it is a stock item, and requires less assembly work than conventional taper columns, contributing to shorter construction times.

■Reducing construction costs

By optimizing the structural balance of the columns, the weight of the steel frame can be reduced, and space can be used effectively without worrying about how it will fit.

  • Product

    Column beam joining method for square/circular steel pipe columns and H-shaped steel beams Fablax®DS Structural material

Share this product


200+ people viewing

Last viewed: 7 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

6 Models of Column beam joining method for square/circular steel pipe columns and H-shaped steel beams Fablax®DS Structural material

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Height (h) mm Column mounting surface width L1 mm Outer diameter (D) mm Panel mounting surface width L2 mm
Column beam joining method for square/circular steel pipe columns and H-shaped steel beams Fablax®DS Structural material-Part Number-DS25

DS25

Available upon quote

110

80

253

Twenty five

Column beam joining method for square/circular steel pipe columns and H-shaped steel beams Fablax®DS Structural material-Part Number-DS30

DS30

Available upon quote

110

95

303

30

Column beam joining method for square/circular steel pipe columns and H-shaped steel beams Fablax®DS Structural material-Part Number-DS35

DS35

Available upon quote

110

105

353

35

Column beam joining method for square/circular steel pipe columns and H-shaped steel beams Fablax®DS Structural material-Part Number-DS40

DS40

Available upon quote

110

115

403

40

Column beam joining method for square/circular steel pipe columns and H-shaped steel beams Fablax®DS Structural material-Part Number-DS45

DS45

Available upon quote

110

125

453

45

Column beam joining method for square/circular steel pipe columns and H-shaped steel beams Fablax®DS Structural material-Part Number-DS50

DS50

Available upon quote

110

130

503

50

Click on the part number for more information about each product

Other products of Asahi Kasei Construction Materials Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Asahi Kasei Construction Materials Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

4.7hrs


Company Review

4.8
  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree