All Categories

History

Data erasure destruction device Storage puncher HDD/SSD manual physical destruction device HDPN-04A-HDPN-04A
Data erasure destruction device Storage puncher HDD/SSD manual physical destruction device HDPN-04A-Cutting Edge Co., Ltd.

Data erasure destruction device Storage puncher HDD/SSD manual physical destruction device HDPN-04A
Cutting Edge Co., Ltd.

🛒 Retail & Distribution Use 🚀 Aerospace Industry Use

Cutting Edge Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

17.3hours

Relatively Fast Response


About This Product

■Main features of storage puncher manual physical destruction device HDPN-04A

1. Easy operation that allows physical destruction by simply inserting the recording medium into the main body and moving the handle up and down. 2. Load up to 6 tons 3. Using hydraulic pressure, anyone can perform destructive work with light force. 4. Since it is a manual type that does not require a power source, it is possible to carry out destructive work without any problems even in places without a power source. There is no electrical or magnetic influence, so it is safe and secure to work in data centers and server rooms. 5. It can be inserted even with the mount removed from the server, making it easy to destroy without any hassle. 6. Drill 4 holes in the HDD and destroy the platter in one attempt 7. Even if the destructive bit (pin) is damaged or worn out, it can be easily replaced with a Phillips screwdriver, so if you have a spare on hand, you can always continue working with peace of mind. 8. If you have an SSD destruction tool, you can physically destroy SSD, USB, SD, etc. 9. It is possible to break the SSD board in a wave pattern at 5mm intervals, completely destroying the memory chips on the board. 10.Made in Japan

■HDD with mounter can be physically destroyed as is.

Since it can be placed into the physical destruction device with the mounter removed from the server, it is very convenient as it saves a lot of effort to remove the mounter installation screws with a screwdriver. Of course, internal drives without mounters can also be destroyed.

■If you replace the optional destruction tool, you can physically destroy SSDs and magnetic tapes with one unit.

As options, there is an SSD/flash memory destruction tool and a cutting tool for cutting magnetic tape, making it possible to destroy various recording media in addition to HDD destruction with one unit. It can be easily replaced with a single Phillips screwdriver, and there is no need to hold multiple units, making it extremely convenient for on-site work sites.

■For HDDs, the destructive bit penetrates to the back side and completely destroys the platter of the recording medium.

The destructive bit penetrates and reaches the back side, so you can see it with your eyes. It completely penetrates the recording disk platters inside the HDD, making it impossible to read data and preventing information leaks.

  • Product

    Data erasure destruction device Storage puncher HDD/SSD manual physical destruction device HDPN-04A
  • Usage Scenarios

    Retail & Distribution Use / Aerospace Industry Use

Share this product


230+ people viewing

Last viewed: 5 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Data erasure destruction device Storage puncher HDD/SSD manual physical destruction device HDPN-04A

Image Part Number Price (excluding tax) Weight Number of destroyed holes Destruction method Destruction bit replacement Number of times the destruction handle is raised and lowered Body dimensions Maximum load Accessory parts SSD destruction tool HDD destruction tool Option
Data erasure destruction device Storage puncher HDD/SSD manual physical destruction device HDPN-04A-Part Number-HDPN-04A

HDPN-04A

Available upon quote

Approximately 15.5kgs

4

Hydraulic

Easy replacement with a Phillips screwdriver

Approximately 15-20 times

Width 182 x Depth 190 x Height H281mm

6 tons

Destruction handle, HDD installation tray, clamp

Product number: SSDU-02M
Target storage: SSD, M.2 SSD, USB, SD, CF, HDD board
Compatible SSD size: Thickness: 12mm or less, Long side width: 100mm or less, Short side width: 70mm or less

Product number: HDDU-02M
Number of destroyed holes: 4
Compatible HDD types: 3.5 inch, 2.5 inch
Thickness: 26mm or less
HDD size with mount: thickness 31mm or less, width 122mm or less
Bit replacement guideline: 5,000 times

Replacement destruction bit, transportation case

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Shredders Products

Other products of Cutting Edge Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Cutting Edge Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

17.3hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree