All Categories

History

Storage puncher HDD/SSD electric physical destruction device STPN-30-STPN-30
Storage puncher HDD/SSD electric physical destruction device STPN-30-Cutting Edge Co., Ltd.

Storage puncher HDD/SSD electric physical destruction device STPN-30
Cutting Edge Co., Ltd.

💻 Electronics & Electrical Use 🛒 Retail & Distribution Use

Cutting Edge Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

17.3hours

Relatively Fast Response


About This Product

■Main features of storage puncher electric physical destruction device STPN-30

1. Physical destruction is possible in just 8 seconds by inserting the recording medium into the main unit and pressing the start button. 2. Destructive force up to 12 tons 3. Uses hydraulics and can destroy HDDs and SSDs with high power 4. Physical destruction of HDDs, SSDs, and magnetic tapes is possible by replacing various destruction tools with one main unit (world's first) 5. Punctures four holes in the HDD and destroys the recording disk platter in one attempt 6. Possible to break 3.5-inch and 2.5-inch HDDs by bending them into a wedge shape. 7. Comes with a mounter (carrier) for servers. No need to remove the HDD; it can be destroyed as is. 8. Even if the destructive bit (pin) is damaged or worn out, it can be easily replaced with a Phillips screwdriver, so if you have a spare on hand, you can always continue working with peace of mind. 9. Unique feature that prevents the broken shaft from coming out after being broken 10. It is possible to break the SSD board with waves at 5mm intervals, completely destroying the memory chips on the board. 11. Can be powered by battery even in places without power supply, making it possible to carry out destructive work even on-site (world's first) 12. It is small and lightweight, weighing approximately 18 kg, and is extremely compact with a volume ratio of two-thirds of conventional products. Ideal for on-site services, etc.

■For HDDs, the destructive bit penetrates to the back side and completely destroys the platter of the recording medium.

The destructive bit penetrates and reaches the back side, so you can see it with your eyes. It completely penetrates the recording disk platters inside the HDD, making it impossible to read data and preventing information leaks.

■A function that prevents the destruction shaft from getting stuck inside the disk and stopping when the HDD is destroyed.

During physical destruction of an HDD, the destruction shaft may become stuck inside the HDD and become stuck. When such a situation occurs, work stops and time is wasted. The storage puncher places the HDD on a lifting table and raises and lowers it using an electric hydraulic pump. The recording medium is pressed against the destruction tool fixed at the top and bottom inside the main unit with a powerful load of up to 12 tons. After destruction, the pusher plate uses the force of the spring to separate the recording medium and destruction tool, preventing them from sticking together.

■Main product warranty

3 years or 50,000 times, whichever comes first (*Options not applicable)

■Country of manufacture

Japan

  • Product

    Storage puncher HDD/SSD electric physical destruction device STPN-30
  • Usage Scenarios

    Electronics & Electrical Use / Retail & Distribution Use

Share this product


210+ people viewing

Last viewed: 13 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Storage puncher HDD/SSD electric physical destruction device STPN-30

Image Part Number Price (excluding tax) Number of destroyed holes Destruction method Destruction bit replacement Destruction option exchange Power consumption Standard accessories Body weight Body dimensions Maximum load Processing time Input power Option
Storage puncher HDD/SSD electric physical destruction device STPN-30-Part Number-STPN-30

STPN-30

Available upon quote

4

Hydraulic

Easy replacement with a Phillips screwdriver

Easy to replace without tools

Operating (average): 300W

AC power cable, instruction manual, 2 types of screwdrivers

Approximately 18Kgs

Width 187 x Depth 289 x Height 410mm

12 tons

10 seconds (varies depending on conditions such as thickness and hardness)

AC100V

Destruction tool + tray, replacement destruction bit, transport case

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Shredders Products

Other products of Cutting Edge Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Cutting Edge Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

17.3hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree