Instantly generates bubbles and increases concentration through circulation Ultra Fine Bubble Generator Large Flow Model (Shibata Engine Basic Series)
Shibata
🍎
Food Industry Use
🚗
Automotive & Transport Use
🔩
Metal Processing Industry Use
About This Product
Just connect it to equipment or piping to turn water into ultra-fine bubble water. UFB with a center diameter of 100nm is generated in one pass of water pressure, and the concentration is increased through circulation.
-
Product
Instantly generates bubbles and increases concentration through circulation Ultra Fine Bubble Generator Large Flow Model (Shibata Engine Basic Series)
-
Handling Company
Shibata
-
Categories
-
Usage Scenarios
Food Industry Use / Automotive & Transport Use / Metal Processing Industry Use
3 Models of Instantly generates bubbles and increases concentration through circulation Ultra Fine Bubble Generator Large Flow Model (Shibata Engine Basic Series)
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Material Engine | Material casing | Model | Nominal diameter Discharge side | Nominal diameter Water supply side | Operating temperature range (℃) | Outer diameter (mm) | Product weight (kg) | Standard performance Discharge water flow rate (L/min) | Structure | Working pressure range (MPa) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
U75N-S03M300L |
Available upon quote | POM,PEEK,EPDM | SUS304, EPDM, PTFE | Large flow model (ferrule specification) | 4.0S ferrule | 4.0S ferrule | 1℃~95℃ | Φ159.5×212.5 (Φ159.5 includes 4.0S clamp) | Approximately 4.2 | Approximately 284 (pressurized water pressure 0.3MPa, flow rate varies depending on the usage environment) | Made of metal and resin | 0.2~1.0 |
|
|
U71N-S03M300L |
Available upon quote | POM,PEEK,EPDM | SUS304, EPDM, PTFE | Large flow model (screw-in specification) | R2 1/2 screw | R2 1/2 screw | 1℃~95℃ | Φ159.5×480 (Φ159.5 includes 4.0S clamp) | Approximately 4.3 | Approximately 284 (pressurized water pressure 0.3MPa, flow rate varies depending on the usage environment) | Made of metal and resin | 0.2~1.0 |
|
|
U74N-S03M300L |
Available upon quote | POM,PEEK,EPDM | SUS304, EPDM, PTFE | Large flow model (flange specification) | 80A flange | 80A flange | 1℃~95℃ | Φ185×390 | Approximately 8.6 | Approximately 284 (pressurized water pressure 0.3MPa, flow rate varies depending on the usage environment) | Made of metal and resin | 0.2~1.0 |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Shibata
View more products of Shibata
