DC ammeter PSA-2401
Coco Research Co., Ltd.
About This Product
■Summary
Accurately responds to rapid fluctuations with breakthrough speed. Achieved a 40mΩ shunt for PWM current/charging current measurement.
■Features
・Solenoid valve (electromagnetic valve) ・Suitable for real-time measurement and feedback control of PWM current of actuators, etc.
・Shunt resistance 40mΩ or less for charging current evaluation
・CAN 2ms ~ Update Output/Setting Significantly reduces the number of wiring compared to BCD
・16bit analog 2ms ~ update output Arbitrary scaling and zero adjustment possible
・Power supply, measurement, and settings via USB. Setting values can be saved and verified, allowing safe management of equipment settings.
- Lightweight at 60g, can be customized on a DIN rail (mounting hardware sold separately). We can also offer waterproof housing versions and multi-channel measuring instruments that combine speed measurement.
・LINKSHIP compatible Measurement management software ahead of the times (free of charge)
■Front USB Type-C connector
Power supply, logging, and settings are possible with USB. Equipped with the industry's first 24 x 48 USB Type-C connector. Settings and power supply can be done from the front without opening the panel.
■CAN output 2ms update
Since it uses 3-wire wiring, the number of wiring can be significantly reduced compared to BCD output. Powerful error detection system is resistant to noise and improves safety.
■16bit analog output 2ms update
Resolution of over 50,000. Full scale and zero scale settings are possible, and arbitrary scaling is possible. Analog output zero adjustment is also possible.
■±5A/±2A/±200mA/±20mA DC
Four models are available in the measurement range (select the model). Other ranges are also available upon request.
■Input resolution 16bit
Over 50,000 input resolution on each range.
■Shunt resistance 40mΩ or less
Loss due to shunt resistance can be significantly reduced.
■DC power supply voltage +7V to +60V
Wide power supply voltage range compatible with DC12V/24V/448V.
■Isolation
Electrically isolated between power supply/current input/other input/output.
■Quick pocket
Contains a specification summary with notes. Usage instructions and setting values can be written and viewed immediately on site.
■Mounting hook
Fix the main body with the left and right mounting hooks.
■Detachable plug connector
Our company is the first in the industry to use 24×48. All you have to do is connect the wires to the plug connector in advance and insert them by hand.
■DIN rail mountable
Compatible with DIN rail mounting, convenient for use as a converter inside a control panel.
-
Product
DC ammeter PSA-2401
-
Handling Company
Coco Research Co., Ltd.
-
Categories
4 Models of DC ammeter PSA-2401
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Decimal point position | Display (numeric) | Display moving average number of times | Display range | Display update time | Hold function | Hold input | Indicator | Input connector | Input resistance | Input signal | Isolation | Low cut function | Low pass filter | Mass | Maximum allowable input | Measurement accuracy | Measurement resolution | Measuring range | Moving average number | Number of input points | Operation method | Output update time | Power consumption | Power supply voltage | Sampling rate | Setting value memory | USB communication function | USB communication specifications | Withstand voltage |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
PSA-2401 ±20mA type |
Available upon quote |
Set in program mode 0:□□□□□ (no decimal point) 1:□□□□.□~4:□.□□□□ |
7seg 5 digits (character height 9mm) Red, can be turned off, brightness adjustment in 10 levels | 1~9 times: configurable |
-19,999~99,999 Over display: OL Zero display: Leading zero suppression |
0.3 seconds (can be set in the range of 0.1~9.9 seconds) | Current value/Maximum value/Minimum value/Maximum fluctuation range value | 1 point: ON when shorted to GND, OFF when opened | 1 point Select from power/hold | Spring lock plug connector | Approximately 1Ω | DC current signal | Power supply/current input/other input/output | 0 judgment when the current value is less than the set value | Cutoff frequency 1kHz (custom order available) | Approximately 60g | -3~+3A | ±0.1%FS＋1digit | 0.001mA | -20.000~＋20.000mA | 1~99 | 1 point | ⊿Σ integral method | 2ms~9,999ms Set in 1ms increments | 3W or less | DC+7V~+60V (with reverse connection protection) Power supply from USB host: 5V |
Select from 8/16/32/64/128/250/860sps (times/second) Oversampling frequency fixed at 250kHz |
Non-volatile memory (EEPROM) | Writing/reading of set values/continuous output of measured values | USB2.0 (serial port communication 230.4kbps via USB virtual COM) | Power supply/current input/other input/output: 500V DC for 1 minute between each terminal |
|
|
PSA-2401 ±200mA type |
Available upon quote |
Set in program mode 0:□□□□□ (no decimal point) 1:□□□□.□~4:□.□□□□ |
7seg 5 digits (character height 9mm) Red, can be turned off, brightness adjustment in 10 levels | 1~9 times: configurable |
-19,999~99,999 Over display: OL Zero display: Leading zero suppression |
0.3 seconds (can be set in the range of 0.1~9.9 seconds) | Current value/Maximum value/Minimum value/Maximum fluctuation range value | 1 point: ON when shorted to GND, OFF when opened | 1 point Select from power/hold | Spring lock plug connector | Approximately 100mΩ | DC current signal | Power supply/current input/other input/output | 0 judgment when the current value is less than the set value | Cutoff frequency 1kHz (custom order available) | Approximately 60g | -3~+3A | ±0.1%FS＋1digit | 0.01mA | -200.00~+200.00mA | 1~99 | 1 point | ⊿Σ integral method | 2ms~9,999ms Set in 1ms increments | 3W or less | DC+7V~+60V (with reverse connection protection) Power supply from USB host: 5V |
Select from 8/16/32/64/128/250/860sps (times/second) Oversampling frequency fixed at 250kHz |
Non-volatile memory (EEPROM) | Writing/reading of set values/continuous output of measured values | USB2.0 (serial port communication 230.4kbps via USB virtual COM) | Power supply/current input/other input/output: 500V DC for 1 minute between each terminal |
|
|
PSA-2401 ±2A type |
Available upon quote |
Set in program mode 0:□□□□□ (no decimal point) 1:□□□□.□~4:□.□□□□ |
7seg 5 digits (character height 9mm) Red, can be turned off, brightness adjustment in 10 levels | 1~9 times: configurable |
-19,999~99,999 Over display: OL Zero display: Leading zero suppression |
0.3 seconds (can be set in the range of 0.1~9.9 seconds) | Current value/Maximum value/Minimum value/Maximum fluctuation range value | 1 point: ON when shorted to GND, OFF when opened | 1 point Select from power/hold | Spring lock plug connector | Approximately 40mΩ | DC current signal | Power supply/current input/other input/output | 0 judgment when the current value is less than the set value | Cutoff frequency 1kHz (custom order available) | Approximately 60g | -3~+3A | ±0.1%FS＋1digit | 0.1mA | -2000.0~＋2000.0mA | 1~99 | 1 point | ⊿Σ integral method | 2ms~9,999ms Set in 1ms increments | 3W or less | DC+7V~+60V (with reverse connection protection) Power supply from USB host: 5V |
Select from 8/16/32/64/128/250/860sps (times/second) Oversampling frequency fixed at 250kHz |
Non-volatile memory (EEPROM) | Writing/reading of set values/continuous output of measured values | USB2.0 (serial port communication 230.4kbps via USB virtual COM) | Power supply/current input/other input/output: 500V DC for 1 minute between each terminal |
|
|
PSA-2401 ±5A type |
Available upon quote |
Set in program mode 0:□□□□□ (no decimal point) 1:□□□□.□~4:□.□□□□ |
7seg 5 digits (character height 9mm) Red, can be turned off, brightness adjustment in 10 levels | 1~9 times: configurable |
-19,999~99,999 Over display: OL Zero display: Leading zero suppression |
0.3 seconds (can be set in the range of 0.1~9.9 seconds) | Current value/Maximum value/Minimum value/Maximum fluctuation range value | 1 point: ON when shorted to GND, OFF when opened | 1 point Select from power/hold | Spring lock plug connector | Approximately 40mΩ | DC current signal | Power supply/current input/other input/output | 0 judgment when the current value is less than the set value | Cutoff frequency 1kHz (custom order available) | Approximately 60g | -6~+6A | ±0.1%FS＋1digit | 0.25mA | -5,000.0~+5,000.0mA | 1~99 | 1 point | ⊿Σ integral method | 2ms~9,999ms Set in 1ms increments | 3W or less | DC+7V~+60V (with reverse connection protection) Power supply from USB host: 5V |
Select from 8/16/32/64/128/250/860sps (times/second) Oversampling frequency fixed at 250kHz |
Non-volatile memory (EEPROM) | Writing/reading of set values/continuous output of measured values | USB2.0 (serial port communication 230.4kbps via USB virtual COM) | Power supply/current input/other input/output: 500V DC for 1 minute between each terminal |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Coco Research Co., Ltd.
View more products of Coco Research Co., Ltd.
About Company Handling This Product
- Japan